Pro1 Technologies T855 Manuale utente

Operation ManualOperation Manual

U.S. Registered Trademark. Patents pending

T855

Pro1 Technologies

P.O. Box 3377

Springeld, MO 65808-3377

Toll Free: 888-776-1427

Web: www.pro1iaq.com

Hours of Operation: M-F 9AM - 6PM Eastern

Table of Contents

Thermostat Operation

Thermostat Quick Reference

Programming

Features

Warranty Information

Page

2-3

4-7

8-12

Una version en español de este

manual se puede descargar en la

pagina web de la compañia.

Equipment damage hazard.

Do not operate the cooling

system if the outdoor

temperature is below 50 ˚F

(10 ˚C) to prevent possible

compressor damage.

Caution

Rev. 1841

13-14

Thermostat OperationThermostat Operation

LCD Display

Glow in the dark light button

Fan Button

System Button

Temperature Setpoint Buttons

See page 6 for details about

this display read out.

The glow in the dark light

button will self illuminate

for several hours after

exposure to ambient light.

This button turns on the

display light when pressed.

Select ON, AUTO or IAQ.

The ON setting will run the

fan continuously. The AUTO

setting will cycle the fan on

only when the heating or

cooling system is on. IAQ

will enable IAQ FAN MODE,

if selected.

Selects the operation mode

on your HVAC system.

Selecting HEAT turns on

the heat mode. Selecting

COOL turns on the cool

mode. Selecting OFF turns

both heating and cooling o.

Selecting AUTO will turn the

HEAT or COOL on as needed.

(EM HEAT will appear as an

option if operating a heat

pump. EM HEAT setting will

turn on emergency heat)

Press the or

buttons to select the

desired room temperature.

Button / Battery Door

See page 4 for further

information.

Thermostat Quick Reference

Battery Door Information

When the battery icon appears replace your AA

batteries immediately. Failure to do so may result in your

heating & cooling system becoming inoperable.

Freezing or overheating can occur.

Caution:

LOW

Thermostat Quick Reference

Simple operating instructions are

found on the back of the battery door.

Replace with

2 AA alkaline

Batteries. High

quality Alkaline

batteries are

recommended.

Important:

The low battery icon is displayed when the AA battery power

is low. Whenever the thermostat detects low battery voltage

from the AA batteries, the low battery icon will begin ashing

on the screen ftor 21 days (if the batteries are not changed).

If the batteries are not changed 22 days after the thermostat

detects low battery voltage, the thermostat screen will only

show the ashing battery icon until buttons are pressed. If

the batteries are not changed 43 days after the thermostat

detects low battery voltage, the thermostat screen will only

show the ashing battery icon until buttons are pressed and

the set points will oset to 85°F/29°C in cooling and 55°F/13°C

in heating. At this stage, set point changes can be made

temporarily but, the set points will change back to defaulted

values after a 4-hour period. The thermostat will continue to

perform this low battery ashing, temperature oset

condition until the internal voltage threshold is reached.

When the thermostat internal voltage threshold is reached, all

relays will be opened and the thermostat will become

inoperable until new batteries are installed.

Thermostat Quick Reference Thermostat Quick Reference

Day of the week

Heating Setpoint: Displays the user selectable setpoint temperature.

Energy Ecient Leaf: Indicates the setpoint termperature chosen is a

ecient choice.

WI-FI Icons: Not tobe used in this model.

Indicates the number of heating or cooling stages running

Keypad Lockout: Indicates the thermostat is in keypad lockout

Time of Day / Outdoor Temp / % Humidity

Hold Indicator: Displayed when the thermostat is inpermanent hold

Low Battery Indicator

Indicates current room temperature

Indicates if heating or cooling equmipment is running

Program Menu Buttons: Shows dierent options during

programming.

Fan Button: Changes the fan operation between Auto, IAQ,

and On.

System Button: Changes the system operation between O,

Cool, AUto, Heat, and Emergency Heat based on system tech

setting.

Programming Programming

Set Time

Follow the steps below to set the day of the week and current time:

1. Press the MENU button.

2. Press SET TIME.

3. Day of the week will be ashing. Use the or key to

select the current day of the week.

4. Press NEXT STEP.

5. The current hour is ashing. Use the or key to

select the current hour. When using 12-hour time, make sure

the correct a.m. or p.m. choice is selected.

6. Press NEXT STEP.

7. Minutes are now ashing. Use the or key to

select current minutes.

8. Press DONE when completed.

(If using programming) Set Program Schedule For Four Time Periods

3. Press SET SCHED. Note: Monday-Friday (Monday if in 7day) is displayed

and the WAKE/ OCC1 icon is shown. You are now programming the

WAKE/OCC1 time period for that day.

4. Time is ashing. Use the or key to make your time

selection for that day’s WAKE/OCC1 time period.

Note: If you want the fan to run continuously during this time

period, select ON with the FAN key. If you want to use IAQ

mode during this time period, select IAQ with the fan key.

5. Press NEXT STEP.

6. The setpoint temperature is ashing. Use the or key

to make your setpoint selection for that day’s WAKE/OCC1

period.

7. Press NEXT STEP.

8. Repeat steps 4 through 7 for that day’s LEAVE/UNOCC1 time period,

RETURN/OCC2 time period, and SLEEP/UNOCC2 time period.

To customize your 5+1+1 Program schedule, follow these steps:

Weekday:

(WAKE, LEAVE, RETURN, SLEEP or OCCUPIED 1, UNOCCUPIED1, OCCUPIED 2, UNOCCUPIED 2)

1. Select HEAT or COOL with the system switch.

Note: You have to program heat and cool each separately.

2. Press the MENU button (If menu does not appear rst press

RUN SCHED).

You will see a TECH SETUP option after the MENU key is pressed.

This TECH SETUP key is for installer conguration and should NOT

be changed unless you consult your professional heating and air

conditioning technician.

Important:

Continued on next page...

Set Program Schedule For Two Time Periods

1. Select HEAT or COOL with the system key.

Note: You have to program heat and cool each separately.

2. Press the MENU button (If menu does not appear rst, press

RUN SCHED).

3. Press SET SCHED. Note: Monday-Friday (Monday if in 7day) is dis

played and the OCCUPIED text is shown. You are now program

ming the OCCUPIED time period for that day.

4. Time is ashing. Use the or key to make your time

selection for that day’s OCCUPIED time period.

Note: If you want the fan to run continuously during this time

period, select ON with the FAN key. If you want to use IAQ

mode during this time period, select IAQ with the fan key.

5. Press NEXT.

6. The setpoint temperature is ashing. Use the or key

to make your setpoint selection for that day’s OCCUPIED period.

7. Press NEXT.

8. Repeat steps 4 through 7 for that day’s UNOCCUPIED time

period.

To customize your 5+1+1 Program schedule, follow these steps:

Weekday:

(OCCUPIED, UNOCCUPIED)

Programming Programming

Repeat steps 4 through 7 for the Saturday WAKE/OCC1 time period, for the

Saturday LEAVE/UNOCC1 time period, for the Saturday RETURN/OCC2

time period, and for the Saturday SLEEP/UNOCC2 time period.

Saturday:

Repeat steps 4 through 7 for the Sunday WAKE/OCC1 time period, for the

Sunday LEAVE/UNOCC1 time period, for the Sunday RETURN/OCC2 time

period, and for the Sunday SLEEP/UNOCC2 time period.

Sunday:

A Note About Auto Changeover:

When in Auto you have the ability to switch between auto heat or auto

cool by pressing the system key. This can be done once the current

mode has reached its setpoint. For example: if in auto heat, the heat

setpoint must be satised before the thermostat will allow you to switch

to auto cool. You can switch out of auto by holding down the system

key. To get back into auto, you must toggle the system key to auto.

To customize your 7 day Program Schedule, repeat

steps 4 through 8 for the Tuesday, Wednesday, Thursday,

Friday, Saturday and Sunday time periods.

Continued on next page...

Repeat steps 4 through 7 for the Saturday OCCUPIED time period

and for the Saturday UNOCCUPIED time period.

Saturday:

Repeat steps 4 through 7 for the Sunday OCCUPIED time period and

for the Sunday UNOCCUPIED time period.

Sunday:

Programming Features

If appears in the display, then the keypad is locked. All or some of

the keys will not work. Hold the and keys for 3 seconds to

remove the lock. Use the same procedure to lock the display

Keypad Lockout Note:

Temporary Hold: The thermostat will display HOLD and RUN SCHED

on the bottom of your screen when you press the or

key. If you do nothing, the temperature will remain at this setpoint

temporarily for 4 hours. After this, the program setpoint will then

replace your temporary setpoint.

Permanent Hold: With a temporary hold set, if you press the HOLD

key at the bottom of your screen, you will see HOLD appear below

the setpoint temperature in the display. The thermostat will now

permanently stay at this setpoint and can be adjusted using the

or keys.

To Return To Program: Press the RUN SCHED key at the bottom of

your screen to exit temporary and permanent holds.

Temporary & Permanent Hold Feature

To customize your 7 day Program schedule, repeat

steps 4 through 8 for the Tuesday, Wednesday,

Thursday, Friday, Saturday and Sunday.

A Note About Programmable Fan:

The programmable fan feature will run the fan continuously during

during any time period when it is programmed to be on. This is the best

way to keep the air circulated and to eliminate hot and cold spots in your

building. If using IAQ mode, set fan to IAQ for any time period.

Warranty Information

Warranty Registration

Your new thermostat has a 5 year limited warranty. You must register

your thermostat within 60 days of installation. Without this

registration the warranty period will begin on the date of manufacture.

For warranty issues please contact the HVAC professional that

installed this product. You can register your new thermostat in 2 ways:

Go to the company website, select warranty registration and

ll out a short registration form.

Complete the form below and mail it to the address shown.

Warranty Registration

Online

Mail

Filter Change & Other Reminders

This thermostat also has other maintenance reminders (Humidity

Pad, UV lamp, and IAQ Cell), that are reset with the same procedure.

Features

If your HVAC contractor has congured the thermostat to remind

you when the air lter needs changed, you will see a reminder in the

display when your air lter needs to be changed.

Resetting The Filter Change Reminder: When the reminder

is displayed, you should change your air lter and reset the reminder

by holding down the Set Time/Next Step button of the thermostat

for 3 seconds.

Name:

Address:

City:

State:

Zip:

Thermostat Model:

Date Installed:

Complete form and mail to:

Thermostat Warranty Registration

Pro1iaq

P.O. Box 3377

Springeld, MO 65808-3377

www.pro1iaq.com

Cut Out For

Warranty Registration

Altri manuali per T855

Indice

Altri manuali Pro1 Technologies Termostato

Pro1 Technologies

Pro1 Technologies T631-2 Manuale utente

Pro1 Technologies

Pro1 Technologies T621-2 Manuale utente

Pro1 Technologies

Pro1 Technologies T955WH Manuale utente

Pro1 Technologies

Pro1 Technologies T805 Manuale utente

Pro1 Technologies

Pro1 Technologies T601-2 Manuale utente

Pro1 Technologies

Pro1 Technologies T955S Manuale utente

Pro1 Technologies

Pro1 Technologies T855SH Manuale utente

Pro1 Technologies

Pro1 Technologies T701i Manuale utente

Pro1 Technologies

Pro1 Technologies RZ251W Manuale utente

Pro1 Technologies

Pro1 Technologies T755WHO Manuale utente

Pro1 Technologies

Pro1 Technologies T855 Istruzioni per l’uso

Pro1 Technologies

Pro1 Technologies T631W-2 Manuale utente

Pro1 Technologies

Pro1 Technologies T731 Manuale utente

Pro1 Technologies

Pro1 Technologies ZDA250W Manuale utente

Pro1 Technologies

Pro1 Technologies T621-2 Manuale utente

Pro1 Technologies

Pro1 Technologies Z955W Manuale utente

Pro1 Technologies

Pro1 Technologies T855iSH Manuale utente

Pro1 Technologies

Pro1 Technologies T955 Manuale utente

Pro1 Technologies

Pro1 Technologies T621-2 Manuale utente

Pro1 Technologies

Pro1 Technologies T755 Manuale utente

Pro1 Technologies

Pro1 Technologies T701i Manuale utente

Pro1 Technologies

Pro1 Technologies T621-2 Manuale utente

Pro1 Technologies

Pro1 Technologies T725 Manuale utente

Pro1 Technologies

Pro1 Technologies T771 Manuale utente

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Honeywell

Honeywell CM721 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

Honeywell

Honeywell RLV4305 Manuale utente

Honeywell

Honeywell Prestige 2.0 THX9421 Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente