Page 4
Getting to know your 24*7
Ensure the 24*7 machine is placed on a at dry surface away from other large
electrical items which may interfere with the foil recognition system.
Open the top lid of the machine by lifting the
release catch (2) and pulling the lid up. Ensure the
safety catch is engaged holding the lid in the fully
openpositionasshowning2.
Insert the foil into the locators inside the body of
the machine. The core locators will only accept
the corresponding sized core which hold the foil
- make sure the foil is correctly inserted with the
large core side in the large locator and the small
in the small locator. The foil will feed forward from
theundersideoftherollasshowning1.
Pullfoilforwardasshowning1makingsurefoil
is pulled taught and crease free. Pull forward to
allow approx 5cm of foil to overhang the lip of the
machine making sure the foil sensor is covered as
showning1.
When foil is correctly loaded close the lid of the
machine by releasing the lid stay catch as shown
ing2(greenarrows)andthenloweringthelid
asing2(greyarrows).Takecareofthesharp
cutting blade when lowering the lid which must be
fully closed in order for the machine to operate
Make sure the machine is plugged into the power
supply and that the on/off switch is in the on posi-
tion (the lights will come on when the machine is
switched on).
You are now ready to select the foil
options you require!
Fig 1.
Fig 2.
Preparing the machine for use - Loading foil.
Lid Stay Catch
#freedomtocreate
