Profoon TX-325 Manuale utente

USER’S MANUAL

TX-325

1. PHONE OVERVIEW

when using the phone in a suspended position, here you can tem-

porarily put the receiver to e.g. pick something up without discon-

necting your call

call light, illuminates when receiv-

ing a call

phone line input (bottom of phone)

display

Telephone function buttons, see

the next page

keypad for dialling numbers

(the * and # buttons are used for

tele-banking, amongst other func-

tions)

button, for activating/deactivat-

ing the speaker function

call light, remains lit while the phone

is in use, ashes when there are any

missed calls (*)

button, to pick up e.g. a waiting call

button, to insert a dialling pause in a phone number

button, to redial the last dialled number

switch for adjusting the call volume (bottom of phone)

spiral cord input (at bottom of receiver and bottom of phone)

*: only when subscribed to the Caller-ID service

123

456

789

ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

M1 M2 M3 M4 C

M...

to dial 2-button memories

to delete memories

during a call, press to switch off the microphone (MUTE), press again to

switch the microphone back on

to adjust the volume for hands-free calls

4 direct memory buttons

correction button, to delete wrong entries in names or numbers

and buttons, to scroll memories and settings

phonebook, the open the telephone memory

OK button, to save settings and memories

M...

2. INSTALLATION

2.1 Receiver:

1. connect the receiver with the telephone by attaching one side of the spiral cable to

the bottom of the receiver and the other side to the left side of the telephone (See

illustration on previous page)

2. push in the plugs until they’re securely connected

2.2 Telephone:

1. plug the telephone wire into the bottom of the telephone

2. insert the telephone plug into a telephone wall socket

2.3 Desk bracket:

you can use the phone as a desk model by

clicking the bracket onto the bottom of the

phone according to the illustration below

press the bracket according to

the illustration to disassemble again

2.4 Wall-mounting:

1. in a vertical line, drill 2 holes at a distance of 10 cm from each other and insert plugs

and screws; let the head of the screws protrude for 5 mm

2. rotate the receiver suspension tab 180° according to

the picture; this tab will hold the receiver when used

in a suspended position

3. hook the telephone with the screw holes over the screws and

press it downward

4. x the phone line with cable-ties onto the wall

3. USING THE TELEPHON

3.1 Receiving calls:

the call light illuminates when you’re receiving a call, the

phone will also emit a ringtone

use the switch at the bottom of the phone to set the

call volume to loud, normal or off

pick up the receiver or press the speaker button to answer

calls

3.2 Dialling numbers:

pick up the receiver or press the speaker button

use the keypad to enter the phone number, this number will be

dialled directly

3.3 Pre-dialling:

use the keypad to enter the phone number

(use the Cbutton to delete any incorrect input)

pick up the receiver or press the speaker button to dial the

number

3.4 Ending calls:

put down the receiver or press the speaker button again to

disconnect your call

123

456

789

ABC DEF

GHI JKL MNO

PQRS TUV

WXYZ

123

456

789

ABC DEF

GHI JKL MNO

PQRS TUV

WXYZ

123

456

789

ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

M1 M2 M3 M4 C

M...

3.5 Call signal:

press the button, the last dialled number will appear in the

display

the call duration of this conversation will appear in the lower

part of the display

use the and buttons to dial the last dialled number

(the TX-325 keeps the 16 last dialled numbers in its memory)

pick up the receiver or press the speaker button to dial the

number

You can delete a recently dialled number by searching for it (see above) and then press-

ing the and OK buttons.

You can delete all recently dialled numbers by pressing the button, then press and

hold the button for 4 seconds.

3.6 Mute (switching off the microphone):

briey press the button to switch off the microphone of your

phone, the display will show the text: [ MUTE ON ]

briey press the button again to switch the microphone back

3.7 Hands-free volume:

repeatedly press the button to set the volume for hands-

free calls

- you can choose from 4 volume levels

- only the speaker volume can be adjusted, the microphone

volume is set to a xed level

- the display will indicate the volume level

- the receiver volume is set to a xed level and cannot be

adjusted

3.8 Dialling memory numbers:

(chapter 5 describes how to program memories)

phonebook memories:

press the button

use the keypad to enter the rst letter of the name to be dialled or

use the and buttons to scroll the entire phonebook

pick up the receiver or press the speaker button to dial the

number

direct memories M1 ~ M4:

press the desired memory button M1 ~ M4, the display will

show the number for you to verify

pick up the receiver or press the speaker button to dial the

number

2-buttons memory:

press the M.. button, the display will indicate [ Memory num: ]

press the desired button on the keypad, the display will show

the number for you to verify

pick up the receiver or press the speaker button to dial the

number

123

456

789

ABC DEF

GHI JKL MNO

PQRS TUV

WXYZ

M...

123

456

789

ABC DEF

GHI JKL MNO

PQRS TUV

WXYZ

3.9 Extra functions:

‘asterisk’ and ‘pound’ buttons:

the and #buttons are used mainly for tele-banking:

= ASTERISK buttons

#= POUND buttons

R button: (also called FLASH button)

you can use the R button to accept or start a 2nd call

keep in mind that this service is not offered by every telephone

service provider and that it most likely requires an additional

subscription

when connected to a switchboard, you can also use this but-

ton to forward calls; for this, refer to the user manual of your

telephone switchboard or the installer

P button:

use the P button to insert a dialling pause in a phone number;

this can be required when calling through a home or ofce

switchboard

Call duration:

during a call, the display will indicate the elapsed call duration;

immediately after disconnecting the call, this timer will disap-

pear

4. SETTINGS

You can use the menu to customize the phone’s settings. Open the menu by pressing

the OK button and use the and buttons to scroll the options.

Use the Cbutton to leave the settings at any time.

4.1 Display language:

Use this option to set the language in which the various phone notications in the dis-

play must be shown:

press the OK button

use the and buttons to look for the option [ SELECT LAN-

GUAGE ]

press the OK button

use the and buttons to select your desired language

press the OK button

nally, briey pick up the receiver and put it back down to

leave the settings

Instructions for restoring a known language when having set an unknown language ac-

cidentally:

1. briey pick up the receiver and put it back down again

2. now press OK - - OK consecutively

3. use the and buttons to select your desired language

4. press OK

5. pick up the receiver and put it back down

4.2 Time and date:

In standby mode, the display will show the current time and date, which you can set as

follows

press the OK button

use the and buttons to select the option [ DATE/TIME ]

press the OK button

use the and buttons to set the year

press the OK button

use the and buttons to set the hours, minutes, month

and day and conrm each setting by pressing the OK button

nally, briey pick up the receiver and put it back down to

leave the settings

Keep in mind that the phone, including the clock, receives power from the telephone

network. You can disconnect the phone from the telephone network for up to 1 minute

without losing the time and date. When the phone remains disconnected for a longer

period, you’ll need to set the time and date again. However, all number memories will

remain saved, even when disconnecting the phone from the telephone network for a

long period of time.

Tip: when you have a subscription to the Caller-ID service, which operates using FSK

signals, you can also wait until you receive a call. The phone will then automatically set

the correct time and date. Only the year needs to be set if so desired.

Indice

Altri manuali Profoon Telefono

Profoon

Profoon PDX-5200 series Manuale utente

Profoon

Profoon TX-230 Manuale utente

Profoon

Profoon Profoon TX-117 Manuale utente

Profoon

Profoon DECT Series Manuale utente

Profoon

Profoon TX-555 Manuale utente

Profoon

Profoon TX-129vm Manuale utente

Profoon

Profoon Profoon TX-255 Manuale utente

Profoon

Profoon TX-537 Manuale utente

Profoon

Profoon TX-115 Manuale utente

Profoon

Profoon DECT Series Manuale utente

Profoon

Profoon TX-119 Manuale utente

Profoon

Profoon TX-310 Manuale utente

Profoon

Profoon TX-550vm Manuale utente

Profoon

Profoon TX-112 Manuale utente

Profoon

Profoon TX-250(CW) Manuale utente

Profoon

Profoon TX280 Manuale utente

Profoon

Profoon TX-525 Manuale utente

Profoon

Profoon TX-180 Manuale utente

Profoon

Profoon TX-168PHB Manuale utente

Profoon

Profoon TX-555 Manuale utente

Profoon

Profoon TX-160 Manuale utente

Profoon

Profoon TX-105 Manuale utente

Profoon

Profoon PDX-2808 Manuale utente

Profoon

Profoon TX-560 Manuale utente

Manuali Telefono popolari di altre marche

GE 2-9480 Manuale utente

Geemarc

Geemarc PHOTOPHONE 155 Manuale utente

D-Link

D-Link DWR-720/PW Manuale utente

Interquartz

Interquartz Gemini IQ333 Manuale utente

SSS Siedle

SSS Siedle HT 840-0 Manuale utente

Motorola

Motorola TITANIUM Manuale utente

Panasonic

Panasonic ICX Manuale utente

LG H870DS Manuale utente

Samsung

Samsung GT-I9500 Manuale utente

AT&T

AT&T Trimline 205 Manuale utente

Selta

Selta zenyth 600 Manuale utente

Doro

Doro AFTI 20 Manuale utente

UNIQCELL

UNIQCELL A1 Manuale utente

Panasonic

Panasonic KX Series Manuale utente

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuale utente

BT Decor 425 Manuale utente

NEC

NEC SV8500 Manuale utente

Teledex

Teledex PEARL Manuale utente