Projectiondesign Action three 1080 Manuale utente

addendum

english

HDMI to DVI cable

RS232 cable

The Crystalio II projector control is a system for controlling the projector

through the

video processor. To control the projector, the RS232 or network connector

must be connected. see illustration for details. Read the crystalio and the

projector userguide for further information.

From the Crystalio II to the Action! model three 1080, only a single link of

connection is needed for basic operation. This link is a HDMI-to-DVI cable

that can be as long as up to 25m / 75ft. This cable will carry a 1920x1080

progressive signal, processed in the Crystalio II. In addition, for projector

control, a similar length RS232 cable should be connected. This will give full

access to all functions of the projector, through the same menu interface as

that of the Crystalio II.

The Crystalio II will process and forward all incoming signals to the

projector, processed and scaled up to it’s native 1920 x 1080 resolution.

This will be the same whether the input is standard TV or DVD signals at

480i or 576i (NTSC or PAL), or whether the input is High Deﬁnition, 1080i or

720p.

Main features of the Action! model three 1080 / Crystalio II combination

include;

• Broadcast Quality video processing.

• Single Link between source connections and projector unit.

• Industry’s best connectivity and compatibility.

• Single remote control and menu interface for all system control.

english

Crystalio II projector control

FEATURES

Power ON

Turns the projector ON

Power OFF

Turns the projector OFF

Color Management

The color temperature can be calibrated as desired.

The Not Corrected setting displays the native color temperature of the projector.

The Temperature setting is adjustable in steps of 100 Kelvin from 3200 - 9200K

Color Temperature

See Color Temperature submenu for details

Lamp Selection

Select dual or single lamp mode. Dual Lamp mode, both lamps are powered

Single Lamp 1, only lamp 1 is powered.

Single Lamp 2, only Lamp 2 is powered

Lamp Eco Mode

When Lamp Eco Mode is set to ON, the lamps are running at reduced power to

increase lamp life.

Lamp Power

See Lamp Power submenu for details.

Shutter ON/OFF

See Shutter submenu for details

Iris

Select Iris, then arrow keys to adjust to desired combination of

brightness and contrast.

Focus

Select Focus, then arrow keys to focus the image

Shift

Select Shift, then the arrow keys to shift the image up, down or sideways.

The maximum lens shift are 110% vertically and 90% horizontally.

Zoom

Select Zoom, and then use arrow keys to zoom in or out in the picture.

Gamma

See Gamma submenu for details.

Orientation

See Orientation submenu for details

System Information

Displays information about the network connection and projector status.

Projector control

english

Projector control submenus

Color Temperature

use arrow keys on the remote or the crystalio to adjust the color temperature in steps of

100 Kelvin from 3200 - 9200K along the black body curve of the CIE color chart

Lamp Power

Use the arrow keys UP/Down to select lamp 1 or lamp 2.

Use the RIGHT/LEFT keys to adjust the lamp power. The lamps are adjustable from 80

- 100% of maximum power.

Gamma

The source image is adapted to characteristics typical to certain applications. This

enables an optimized image depending on whetever the source is Film or video based,

computer, etc.

MENU SYSTEM

english

Orientation

Select between desktop front, desktop rear, ceiling front and ceiling rear mode.

The image will be ﬂipped and/or reversed accordingly.

System Information

Displays information about the projector network connection and the status.

More Control

For more detailed control, the projector has two protocols built in for control that can

be used either through the RS232 connector or through the LAN connector. A simple

instruction set (SIS) ASCII protocol gives access to the most frequently used commands.

In addition, a binary protocol is available where each command is a series of 32 bytes in

one packet. The protocols allow for both SET and GET operations.

a detailed description of conﬁguration, use and command set is described in a separate

document “RS232 and LAN communication protocol and command set”

601-0092-00

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Projectiondesign Proiettore

Projectiondesign

Projectiondesign F22 Manuale utente

Projectiondesign

Projectiondesign three 1080 Manuale utente

Projectiondesign

Projectiondesign evo2sx+ Manuale utente

Projectiondesign

Projectiondesign evo22SX+ Manuale utente

Projectiondesign

Projectiondesign F35 Manuale utente

Projectiondesign

Projectiondesign F10 AS3D Manuale utente

Projectiondesign

Projectiondesign FS35 WQXGA Istruzioni per l'installazione e il funzionamento

Projectiondesign

Projectiondesign cineo3+ 1080 Manuale utente

Projectiondesign

Projectiondesign cineo Manuale

Projectiondesign

Projectiondesign avielo spectra Manuale utente

Projectiondesign

Projectiondesign F35 Manuale utente

Projectiondesign

Projectiondesign Action three Manuale utente

Projectiondesign

Projectiondesign Action one mk III Manuale

Projectiondesign

Projectiondesign cineo Manuale

Projectiondesign

Projectiondesign F12 WUXGA Manuale utente

Projectiondesign

Projectiondesign one mk II Manuale utente

Projectiondesign

Projectiondesign F32 Manuale utente

Projectiondesign

Projectiondesign F1+ SXGA+ Manuale utente

Projectiondesign

Projectiondesign F2 sx+ Manuale

Projectiondesign

Projectiondesign WUXGA 720/1080 SXGA+ Manuale utente

Projectiondesign

Projectiondesign F1 sxga Manuale utente

Projectiondesign

Projectiondesign Action one mk II Manuale utente

Projectiondesign

Projectiondesign F80 Manuale utente

Projectiondesign

Projectiondesign F10 AS3D Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente