Prolyte S36PRT Truss Manuale utente
© 2023 Prolyte BV.
PROLYTE
S36PRT Truss
User manual
Part 2: Product-specific instructions
Original instructions
DN00171 Issue 1
July 2023
Page 3 of 10 DN00171 Issue 1 © 2023 Prolyte BV.
Manufacturer:
Area Four Industries s.r.o.
Spindlerova 286
413 01 Roudnice nad Labem
Czech Republic
T +420 416 810 800
We have made every effort to ensure the accuracy of this manual. No liability will be accepted for
errors. We reserve the right to change or alter our products or manuals without prior notice.
No part of this manual may be reproduced in any form or by any means without prior written
permission.
If you have a warranty claim, malfunction or spare part inquiry, contact your point of sale or the
manufacturer.
If you have comments or improvement ideas for this document, please contact us by using the e-mail
address found on the back cover of the document. All comments and ideas will be carefully considered
in the future development of the product or this document.
© 2023 Prolyte BV. DN00171 Issue 1 Page 4 of 10
Contents
1 Introduction .......................................................................................................................................... 5
1.1 About this product ....................................................................................................................... 5
1.2 Related information ..................................................................................................................... 5
1.3 About this manual ........................................................................................................................ 5
1.4 Terminology.................................................................................................................................. 6
1.5 Standards ...................................................................................................................................... 6
2 Safety .................................................................................................................................................... 6
3 Limitations of use .................................................................................................................................. 6
3.1 Allowable loading ......................................................................................................................... 6
3.2 Structural data .............................................................................................................................. 6
4 Transport, handling and storage ........................................................................................................... 7
5 Identification ......................................................................................................................................... 7
6 Technical specifications ......................................................................................................................... 8
7 Load capacity ......................................................................................................................................... 9
8 Approved accessories............................................................................................................................ 9
9 Coatings and surface treatments ........................................................................................................ 10
10 Slinging methods ................................................................................................................................. 10
11 Assembly and disassembly .................................................................................................................. 10
12 Maintenance ....................................................................................................................................... 10
13 Inspection ............................................................................................................................................ 10
14 Discard criteria .................................................................................................................................... 10
15 Warranty ............................................................................................................................................. 10
16 Certificates .......................................................................................................................................... 10
Change history
Issue Date Changes
1 July 2023 First issue.
Page 5 of 10 DN00171 Issue 1 © 2023 Prolyte BV.
1 Introduction
This manual is intended for truss owners, providers and skilled riggers and any person who has been
trained in working safely with trusses.
This manual is Part 2 of the User Manual. The User Manual consists of the following parts:
Part 1: General instructions
Part 2: Product-specific instructions
This manual must be read in conjunction with Part 1: General instructions of the User Manual.
If there are discrepancies between Part 1 and Part 2, the information given in Part 2 is the information
that applies to the product and overrides the information given in Part 1.
This manual assumes that you have been trained or work under the control of a competent or qualified
person who has been trained in safety and assembly.
1.1 About this product
PROLYTE trusses are structural elements designed to be repeatedly assembled and disassembled to carry
loads in temporary or permanent installations. Depending on the application, PROLYTE trusses can be
referred to as lifting accessories or construction products. For information on the related standards, see
Chapter 1.5.
The S36PRT series can be used for indoor and outdoor structures.
1.2 Related information
For more information on the product, see www.prolyte.com/products/aluminium-truss.
1.3 About this manual
Before working with the product, read this manual carefully and pay attention to the information
provided. Use this manual to familiarize yourself with the product, its proper use and safety regulations.
1.3.1 Safety conventions
Indicates a hazardous situation, which, if not avoided, will result in death or serious injury. This signal
word is limited to the most extreme situations.
Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could result in minor or moderate injury.
Indicates information considered important but not hazard-related.
© 2023 Prolyte BV. DN00171 Issue 1 Page 6 of 10
1.4 Terminology
See PROLYTE Trusses User Manual, Part 1: General instructions.
Trusses and truss modules are hereinafter referred to by the term “truss”.
1.5 Standards
See PROLYTE Trusses User Manual, Part 1: General instructions.
2 Safety
Before working with the product, see the section Safety in PROLYTE Trusses User Manual, Part 1: General
instructions. Read the Safety information carefully and pay attention to the information provided.
In addition to the Safety information provided in Part 1, make sure you read the Safety information
provided in this product-specific user manual.
Read these safety texts carefully before working with the product.
Make sure manuals are available at all times for all users and employees.
3 Limitations of use
Make sure you read the information provided in section Limitations of use in PROLYTE Trusses User
Manual, Part 1: General instructions.
PROLYTE trusses described in this manual are not specifically designed for lifting people. Adequate load
reduction and safety precautions, according to local legislation, must be considered when people are
lifted.
3.1 Allowable loading
For load capacity information, see Chapter 7.
3.2 Structural data
All our trusses are calculated according to the Eurocode 9 (DIN-EN 1999) standard. Eurocodes are
standards based on Load and Resistance Factor Design (LRFD).
The structural data provided before January 2016 was based on the German DIN 4113 standard. As this
standard had a different safety principle, the structural values cannot be compared.
TÜV certificates issued after February 2015 are all based on Eurocode 9.
Page 7 of 10 DN00171 Issue 1 © 2023 Prolyte BV.
Code Type Material
Geometry
Dimensions
centre to centre Main
chord
[mm]
diagonals
[mm]
Cross-section complete truss
Average
dead
weight
Height Width A Iy Iz IT g
[mm] [mm] [cm2] [cm4] [cm4] [cm4] [kg/m]
S36PRT Rectangular 6082 T6 299 560 50x4 25x3 23.12 4445.05 15460.96 - 26.2
Table 1: Geometry
Code
Design values of resistances
Main
chord Complete truss
N,rd My,rd Mz,rd Vz,rd Vy,rd
[kN] [kNm] [kNm] [kN] [kN]
S36PRT 68.44 40.93 76.65 35.69 -
Table 2: Design values of resistances
4 Transport, handling and storage
See PROLYTE Trusses User Manual, Part 1: General instructions.
5 Identification
See PROLYTE Trusses User Manual, Part 1: General instructions.
© 2023 Prolyte BV. DN00171 Issue 1 Page 8 of 10
6 Technical specifications
Page 9 of 10 DN00171 Issue 1 © 2023 Prolyte BV.
7 Load capacity
In addition to the information and instructions provided in PROLYTE Trusses User Manual, Part 1: General
instructions, the truss loads shall never exceed the values stated in the load tables below.
As per Eurocode 9, all values provided are calculated based on a safety factor of 1.1 on the material and
1.5 on the load.
8 Approved accessories
For a complete overview of approved accessories, see our brochures or www.prolyte.com.
By using excessive force when tightening accessories such as lamp hooks or cell clamps, you may cause
damage to the truss chords.
© 2023 Prolyte BV. DN00171 Issue 1 Page 10 of 10
Pay special attention when using lamp hooks or cell clamps. Their inside radius may not meet the
tube they need to be attached to. This can lead to severe damage.
You should never allow accessories to damage other products.
9 Coatings and surface treatments
See PROLYTE Trusses User Manual, Part 1: General instructions.
10 Slinging methods
See PROLYTE Trusses User Manual, Part 1: General instructions.
11 Assembly and disassembly
See PROLYTE Trusses User Manual, Part 1: General instructions.
12 Maintenance
See PROLYTE Trusses User Manual, Part 1: General instructions.
13 Inspection
See PROLYTE Trusses User Manual, Part 1: General instructions.
14 Discard criteria
See PROLYTE Trusses User Manual, Part 1: General instructions.
15 Warranty
See PROLYTE Trusses User Manual, Part 1: General instructions.
16 Certificates
The TÜV certificates for this product are available at:
https://www.prolyte.com/support/certificates/certificates-download
Page 11 of 10 DN00171 Issue 1 © 2023 Prolyte BV.
Contact details:
PROLYTE BV.
Industriepark 9
9351PC Leek
The Netherlands
T +31 594 85 15 15
www.prolyte.com
Indice
Altri manuali Prolyte Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
