Prorack K007 Manuale utente

FittingKit

K007

Fitting Instructions for Basic Carrier

Instrucciones de montaje para el

sistema de transporte.

Instructions de montage pour Basic

Carrier

x 4

x 1

Revision No:

FittingKit

K007

MAX kgs (lbs)

W/P

WHD

Honda

Accord , 4dr Sedan 85- 89

50 kgs (110 lbs)

Accord , 4dr Sedan Dec 85-Oct 89

50 kgs (110 lbs)

Accord , 4dr Sedan Jul 86-Jun 90

50 kgs (110 lbs)

Prelude , 3dr Coupe 83- 87

50 kgs (110 lbs)

Prelude , 3dr Coupe Feb 83-Sep 87

50 kgs (110 lbs)

Prelude , 3dr Coupe Mar 83-Sep 87

50 kgs (110 lbs)

FittingKit

K007

First Time Installation

Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

This kit fits type A, B, C and D.

These instructions show type A crossbar

fitted. They also apply to type B, C and D.

NOTE: Clamp images in these instructions may

not be representative of the clamps in this kit

FittingKit

K007

Use keys to remove covers.

Use hex screwdriver to reverse adjusting

screw 10 turns.

Press adjusting screw and pull crossbar legs

out. Refer to the crossbar instructions for

crossbar adjustment.

Ensure each end of the crossbar is adjusted

equally.

FittingKit

K007

Remove locking screw.

Cut protective strip in four equal lengths.

Apply protective strip as shown.

Trim if required.

Attach clamp to each leg. NOTE; clamps

may have labels showing their positions on

the vehicle (For example; "Front Right").

FittingKit

K007

Refit locking screw so that it goes through

the hole in the clamp. Do not begin to tighten

the locking screw.

Fit rubber pad (supplied with crossbar) to foot.

Make sure the pad fits into the holes

underneath the foot.

FittingKit

K007

Fitment

Place crossbar on vehicle. Minimum

recommended spacing between the bars is

700mm (27 1/2") (unless otherwise stated).

Adjust the legs on the crossbar so that they

are positioned equally from the ends of the

crossbar, and the clamps engage firmly on

the body work of the vehicle.

Tighten adjusting screw to 5 Nm (3.7 ft lb).

FittingKit

K007

Tighten locking screw on both legs evenly.

Check crossbar is securely attached to the

vehicle.

Use keys to fit and lock covers

FittingKit

K007

CAUTION: Recheck all fasteners immediately

after a load is applied to the crossbars.

Regularly check screws are tight.

FittingKit

K007

Maintenance

Clean the car roof and surfaces of the

product that will be in contact with the car

roof.

Follow the fitting instructions for fitting the

product to your vehicle. Make sure all steps

are carried out in order.

Set crossbars a minimum distance of 700mm

(27 1/2") apart where no other distance is

specified in the fitting instructions. This is

especially important when carrying long

loads.

Check unit is securely attached whenever

you refit it to the vehicle. If the unit feels

loose, refer to the fitting instructions and

readjust.

Some glass/panoramic roofs and radio

antennae may not be able to be used when

the product is fitted.

Do not modify this product.

Refer to the maximum permitted load

capacity specified in the fitting instructions.

Do not exceed the vehicle manufacturers

roof load rating if it is lower than the

maximum load capacity specified in the fitting

instructions.

Loads should not overhang the sides of the

product and be evenly distributed with the

lowest possible centre of gravity.

Long loads should be secured with non-

elastic straps to the front and rear of the

vehicle.

Objects with pointed ends (e.g. ski poles)

should be carried with the pointed ends to

the rear of the vehicle.

Remove all loose or removable objects from

the load prior to loading.

Make sure all loads are securely fastened

with non-elastic straps. Check regularly

during longer journeys.

Indice

Lingue:

Altri manuali Prorack Accessori per automobili

Prorack

Prorack PR3090 Manuale utente

Prorack

Prorack K045 Manuale utente

Prorack

Prorack VOYAGER PR3207 Manuale utente

Prorack

Prorack K988 Manuale utente

Prorack

Prorack K1062 Manuale utente

Prorack

Prorack K693 Manuale operativo e di installazione

Prorack

Prorack WHISPBAR S53 Manuale operativo e di installazione

Prorack

Prorack K1027 Manuale utente

Prorack

Prorack K541 Manuale utente

Prorack

Prorack K431 Manuale utente

Prorack

Prorack K401 Manuale utente

Prorack

Prorack K346 Manuale utente

Prorack

Prorack K107 Manuale utente

Prorack

Prorack K533 Manuale utente

Prorack

Prorack K688 Manuale utente

Prorack

Prorack VOYAGER PR3207 Manuale utente

Prorack

Prorack K312 Manuale utente

Prorack

Prorack K822 Manuale utente

Prorack

Prorack K452 Manuale utente

Prorack

Prorack K129 Manuale utente

Prorack

Prorack K891 Manuale operativo e di installazione

Prorack

Prorack K1006 Manuale operativo e di installazione

Prorack

Prorack K027 Manuale operativo e di installazione

Prorack

Prorack K705 Manuale operativo e di installazione

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente