Protech PA-2019 Series Manuale utente

USER’S

MANUAL

PA-2019 Series

POS System Powered by

Intel®6th / 7th Gen. Core,

Pentium® , Celeron®Processor

PA-2019 Series M6

PA-2019 Series POS System

With LCD / Touchscreen

All trademarks and registered trademarks mentioned herein are the property of their

respective owners.

This manual is copyrighted in July 2019. You may not reproduce or transmit in any

form or by any means, electronic, or mechanical, including photocopying and

recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up the system. The

information contained in this document is subject to change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment not expressly

approve by the party responsible for compliance could void your authority to operate

such equipment.

CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same

or equivalent type recommended by the manufacturer. Dispose of used batteries according

to the manufacturer’s instructions.

WARNING! Some internal parts of the system may have high electrical voltage. And

therefore we strongly recommend that qualified engineers can open and disassemble the

system. The LCD and Touchscreen are easily breakable, please handle them with extra

care.

Contents

TABLE OF CONTENTS

CHAPTER 1 INTRODUCTION

1-1 About This Manual….......................................................

1-2

1-2 POS System Illustration…................................................

1-3

1-2-1 Panel PC………………………………………...

1-3

1-2-2 Normal Stand……………………………………

1-4

1-2-3 POS with 2nd Display…………………………..

1-5

1-2-4 Rear I/O View…………………………………..

1-6

1-3 System Specifications…...................................................

1-7

1-4 Safety Precautions….........................................................

1-10

CHAPTER 2 SYSTEM CONFIGURATION

2-1 Jumper & Connector Quick Reference Table…...............

2-2

2-2 Main Board Component Locations…...............................

2-4

2-3 How to Set the Jumpers…................................................

2-6

2-4 Main Board Connectors and Jumpers……………………

2-8

2-4-1 COM Port & VGA Connector…………………

2-8

2-4-2 COM Port RI and Voltage Selection…………..

2-11

2-4-3 i-Button Connector…………………………….

2-11

2-4-4 i-Button Function Selection…………………...

2-12

2-4-5 LAN & USB Port………………..……..……...

2-13

2-4-6 Internal USB 2.0 Connector…………………...

2-14

2-4-7 USB 3.0 Connector……………………………

2-15

2-4-8 Cash Drawer Connector……………………….

2-16

2-4-9 Cash Drawer Selection………………………...

2-17

2-4-10 Cash Drawer Power Selection…………………

2-20

2-4-11 2nd Display Power Port………………………..

2-21

2-4-12 Printer Power Port………………......................

2-21

2-4-13 LED Connector………………..........................

2-22

2-4-14 System / CPU Fan Connector……………….....

2-23

2-4-15 Power Input Connector………………………...

2-24

2-4-16 Power Connector………………………............

2-25

2-4-17 Power Switch Connector………………………

2-26

2-4-18 External Speaker Connector…………………...

2-27

2-4-19 Speaker Selection…………………...................

2-28

2-4-20 Inverter Connector…………………..................

2-29

2-4-21 LVDS Connector…………………....................

2-30

2-4-22 LVDS Power Selection…………………..........

2-31

2-4-23 LVDS Backlight Type Selection………………

2-32

Contents

2-4-24 Card Reader Connector………………..............

2-33

2-4-25 SATA & SATA Power Connector…………….

2-34

2-4-26 Touch Panel Connector………………………..

2-35

2-4-27 Touch Panel and USB9-1 Selection…………...

2-36

2-4-28 LVDS Output Resolution Selection…………...

2-37

2-4-29 Mini-PCIe / SATA Connector…………………

2-38

2-4-30 Mini-PCIe and USB6 Selection……………….

2-39

2-4-31 Embedded Display Port (EDP) Connector

(option)…………………………………………

2-40

2-4-32 Configuration / Recovery Selection……………

2-41

2-4-33 VCCIO / REFIN Selection…………………….

2-42

2-4-34 Clear CMOS Data Selection…………………...

2-43

2-4-35 GPIO Connector………………….....................

2-44

2-4-36 Audio Jack…………………..............................

2-44

2-5 2nd Display Overview……………………………...........

2-45

2-6 VFD Board: MB-4103, LD720………………….............

2-46

2-6-1 Power Switch Selection………………………..

2-48

2-6-2 RS-232 Serial Interface Connector…………….

2-49

CHAPTER 3 SOFTWARE UTILITIES

3-1 Driver…............................................................................

3-2

3-1-1 Introduction……………………………………

3-2

3-1-2 Intel®Chipset Software Installation Utility……

3-3

3-1-3 VGA Driver Utility……………………………

3-4

3-1-4 LAN Driver Utility…………………………….

3-5

3-1-5 Sound Driver Utility…………………………...

3-6

3-1-6 Touch Screen Driver Utility……………………

3-7

3-1-7 Fingerprint Driver Utility (Optional)……….....

3-8

3-2 Peripheral Device…..........................................................

3-9

3-3 API…................................................................................

3-15

3-4 API Functions…................................................................

3-21

CHAPTER 4AMI BIOS SETUP

4-1 Introduction…...................................................................

4-2

4-2 Entering Setup…...............................................................

4-4

4-3 Main……..........................................................................

4-6

4-4 Advanced …….................................................................

4-8

4-5 Chipset….……………………………..............................

4-33

4-6 Security….........................................................................

4-46

4-7 Boot….……......................................................................

4-47

4-8 Save & Exit…...................................................................

4-51

Contents

APPENDIX A SYSTEM ASSEMBLY

Easy Maintenance – HDD…………............................................

A-3

Easy Maintenance – Back Cover………………………………..

A-4

Easy Maintenance – CPU and Memory…………........................

A-6

Exploded Diagrams for 5-wire Analog Resistive Touch Panel:

Exploded Diagram for PA-2019 POS Open & Close…………...

A-7

Exploded Diagram for PA-2019 POS Stand…………………….

A-8

Exploded Diagram for PA-2019 120W Power Adapter………...

A-9

Exploded Diagram for PA-2019 PPC Open & Close…………...

A-10

Exploded Diagram for PA-2019 Mainboard……………………

A-12

Exploded Diagram for PA-2019 LCD Holder…………………..

A-14

Exploded Diagram for PA-2019 LCD Assembly……………….

A-16

Exploded Diagram for PA-2019 Touch Panel Assembly……….

A-17

Exploded Diagram for PA-2019 HDD Module…………………

A-18

Exploded Diagram for PA-2019 Metal Back Cover…………….

A-19

Exploded Diagram for PA-2019 2.5” SATA HDD……………..

A-20

Exploded Diagrams for Projected Capacitive Touch Panel:

Exploded Diagram for PA-2019 POS Open & Close…………...

A-21

Exploded Diagram for PA-2019 POS Stand……………………

A-22

Exploded Diagram for PA-2019 120W Power Adapter………...

A-23

Exploded Diagram for PA-2019 PPC Open & Close…………...

A-24

Exploded Diagram for PA-2019 Mainboard……………………

A-26

Exploded Diagram for PA-2019 LCD Holder…………………..

A-28

Exploded Diagram for PA-2019 LCD Assembly……………….

A-30

Exploded Diagram for PA-2019 Touch Panel Assembly……….

A-31

Exploded Diagram for PA-2019 HDD Module…………………

A-32

Exploded Diagram for PA-2019 Metal Back Cover……………

A-33

Exploded Diagram for PA-2019 2.5” SATA HDD……………..

A-34

Exploded Diagram for PA-2019 MSR Module…........................

A-35

Exploded Diagram for PA-2019 2nd Display…………………..

A-36

Exploded Diagram for PA-2019 VFD Module…………………

A-37

APPENDIX B TECHNICAL SUMMARY

Block Diagram….........................................................................

B-2

Interrupt Map…............................................................................

B-3

DMA Channels Map…................................................................

B-9

I/O Map…....................................................................................

B-10

Watchdog Timer Configuration…...............................................

B-13

Flash BIOS Update………...........................................................

B-16

Page:1-1

INTRODUCTION

This chapter gives you the information for the PA-2019. It also outlines

the system specifications.

The following sections are included:

About This Manual

POS System Illustration

-Panel PC

-Normal Stand

-POS with 2nd Display

-Rear I/O View

System Specifications

Safety Precautions

Experienced users can jump to chapter 2 on page 2-1

for a quick start.

CHAPTER

Chapter 1 Introduction

PA-2019 SERIES USER

′

S MANUAL

Page: 1-2

1-1. ABOUT THIS MANUAL

Thank you for purchasing our PA-2019 Series System. The PA-2019 is an updated

system designed to be comparable with the highest performance of IBM AT personal

computers. The PA-2019 provides faster processing speed, greater expandability and

can handle more tasks than before. This manual is designed to assist you how to install

and set up the whole system. It contains four chapters and two appendixes. Users can

configure the system according to their own needs.

Chapter 1 Introduction

This chapter introduces you to the background of this manual. It also includes

illustrations and specifications for the whole system. The final section of this chapter

indicates some safety reminders on how to take care of your system.

Chapter 2 System Configuration

This chapter outlines the location of motherboard components and their functions.

You will learn how to set the jumper and configure the system to meet your own needs.

Chapter 3 Software Utilities

This chapter contains helpful information for proper installations of the Intel Utility,

VGA Utility, LAN Utility, Sound Utility, Touch Screen Utility and Fingerprint Utility

(Optional).

Chapter 4 AMI BIOS Setup

This chapter indicates you how to change the BIOS configurations.

Appendix A System Assembly

This appendix gives you the exploded diagrams and part numbers of the PA-2019.

Appendix B Technical Summary

This appendix gives you the information about the allocation maps for the system

resources, Watchdog Timer Configuration, and Flash BIOS Update.

Chapter 1 Introduction

PA-2019 SERIES USER

′

S MANUAL

Page: 1-3

1-2. POS SYSTEM ILLUSTRATION

Unit: mm

1-2-1. Panel PC

367.49

281.95

74.88

30.43

Chapter 1 Introduction

PA-2019 SERIES USER

′

S MANUAL

Page: 1-4

1-2-2. Normal Stand

Unit: mm

Adjustable angle 0-68 degree

367.49

281.95

30.43

87.08

215.31

HDD

Stand

Optional:

MSR &

iButton

15” Touch &

LCD

319.47

63°

Indice

Altri manuali protech Terminale touch

protech

protech prox PA-J511 Manuale utente

protech

protech PA-6610 Manuale utente

protech

protech prox PA-J600 Manuale utente

protech

protech prox PA-J510 Manuale utente

protech

protech PA-3110 Manuale utente

protech

protech KS-M320 Manuale utente

protech

protech MH-5752 Manuale utente

protech

protech prox KS-M333 Manuale utente

protech

protech PA-6970 Series Manuale utente

protech

protech PA-3570 Series Manuale utente

protech

protech PA-3320 Manuale utente

protech

protech POS-3120 Series Manuale utente

protech

protech PS6508 Series Manuale utente

protech

protech POS-6511 Series Manuale utente

protech

protech POS-3150 Series Manuale utente

protech

protech PA-A901 Manuale utente

protech

protech PA-3211 Manuale utente

protech

protech PA-J581 Series Manuale utente

protech

protech PA-1922 Manuale utente

protech

protech PS-8851A Manuale utente

protech

protech PA-6225 Manuale utente

protech

protech PA-J580 Series Manuale utente

protech

protech PA-6722 Manuale utente

protech

protech POS-6510 Series Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente

protech PA-2019 Series Manuale utente

Manuali Terminale touch popolari di altre marche