PSC LINEAR IMAGER 7000 Manuale di installazione e funzionamento

PowerScan®7000

Linear Imager

Product Reference Guide

PSC Inc

959 Terry Street

Eugene, Oregon 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

tion or the procedures described therein may be reproduced or transmitted in any

form or by any means without prior written permission of PSC Inc. or its wholly owned

subsidiaries ("PSC"). Owners of PSC products are hereby granted a non-exclusive,

revocable license to reproduce and transmit this documentation for the purchaser's

own internal business purposes. Purchaser shall not remove or alter any proprietary

notices, including copyright notices, contained in this documentation and shall ensure

that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions

by contacting your PSC representative. Electronic versions may either be download-

able from the PSC website (www.psc.com) or provided on appropriate media. If you

visit our website and would like to make comments or suggestions about this or other

PSC publications, please let us know via the “Contact PSC” page.

Disclaimer

PSC has taken reasonable measures to provide information in this manual that is

complete and accurate, however, PSC reserves the right to change any specification

at any time without prior notice.

PSC is a registered trademark of PSC Inc. The PSC logo is a trademark of PSC. All

other trademarks and trade names referred to herein are property of their respective

owners.

The following patents may apply: 3,991,299 • 4,570,057 •5,021,642 • 5,038,024 • 5,081,343 • 5,095,197 •

5,144,119 • 5,144,119 • 5,144,121 • 5,182,441 • 5,187,355 • 5,187,356 • 5,218,191 • 5,233,172 • 5,258,606

• 5,286,960 • 5,288,985 • 5,420,409 • 5,463,214 • 5,508,505 • 5,541,419 • 5,569,902 • 5,591,956 •

5,723,853 • 5,723,868 • 5,773,806 • 5,773,810 • 5,780,834 • 5,784,102 • 5,786,586 • 5,825,006 • 5,831,254

• 5,837,985 • 5,838,495 • 5,900,613 • 5,914,476 • 5,929,418 • 5,932,862 • 5,942,741 • 5,949,052 •

5,965,863 • 5,992,744 • 6,045,047 • 6,060,722 • 6,119,939 • 6,164,544 • 6,491,223 • 6,254,003 B1

6,264,105 B1 • 6,275,388 B1 • 6,298,176 B2 • 6,370,003 B1 • 6,371,374 B1 • 6,651,428 B2 • D 459,728 •

D400,199 • D461,189 • D446,524 • 6,491,223 • 6,585,159 B1 • 6,561,428 B2 • Additional Patents Pending

Product Reference Guide i

Table of Contents

About This Manual ............................................................................ 1-1

Manual Conventions .................................................................... 1-2

Connecting the Scanner ..................................................................... 1-2

Programming ............................................................................. 1-4

Resetting the Standard Product Defaults .............................................. 1-4

Double Read Timeout ........................................................................ 2-1

Powerdown Timeout .......................................................................... 2-3

LED and Beeper Indicators ................................................................. 2-5

Power On Alert ........................................................................... 2-5

Good Read: When to Indicate ....................................................... 2-6

Good Read Beep Control .............................................................. 2-7

Good Read Beep Frequency ......................................................... 2-8

Good Read Beep Length .............................................................. 2-9

Good Read Beep Volume ........................................................... 2-11

Scanning Features .......................................................................... 2-12

Scan Mode .............................................................................. 2-12

Active Scanning Time ................................................................ 2-14

Laser Pointer Control ................................................................ 2-16

Interface Selection ............................................................................ 3-4

Interface Features ............................................................................ 3-8

Global Interface Features ............................................................ 3-9

RS-232 Interface Features ......................................................... 3-10

Hardware Flow Control......................................................... 3-14

Intercharacter Delay............................................................ 3-14

Software Flow Control.......................................................... 3-14

Host Echo .......................................................................... 3-18

Host Echo Quiet Interval ...................................................... 3-18

Signal Voltage: Normal/TTL .................................................. 3-18

RS-232 Invert..................................................................... 3-18

Beep on ASCII BEL .............................................................. 3-21

Beep on Not on File ............................................................. 3-21

ACK NAK Options ................................................................ 3-22

ACK Character .................................................................... 3-24

NAK Character .................................................................... 3-25

Retry on ACK NAK Timeout................................................... 3-26

ACK NAK Timeout Value ....................................................... 3-27

ACK NAK Retry Count .......................................................... 3-28

ACK NAK Error Handling ............................................................ 3-29

Transmission Failure Indication ............................................. 3-30

IBM-USB Interface Features ....................................................... 3-31

IBM-USB Device usage......................................................... 3-31

IBM ........................................................................................ 3-32

IBM Transmit Labels in Code 39 Format ................................. 3-32

Wand Emulation ....................................................................... 3-33

Supported Symbologies ....................................................... 3-33

Wand Emulation Bar Code Format ......................................... 3-33

Bar/Space Polarity............................................................... 3-34

ii PowerScan®7000

Wand Idle State ..................................................................3-34

Signal Speed.......................................................................3-36

Transmit Leading Noise ........................................................3-37

Symbology Conversion ......................................................... 3-38

Keyboard Wedge/USB Keyboard ..................................................3-40

Data Editing Overview .......................................................................4-1

Please Keep In Mind... .................................................................4-2

Global Prefix/Suffix ............................................................................4-2

AIM ID .............................................................................................4-5

Label ID ...........................................................................................4-7

Case Conversion ....................................................................... 4-14

Character Conversion ................................................................4-15

UPC-A ..............................................................................................5-2

Disable/Enable UPC-A ..................................................................5-2

Check Digit Transmission .............................................................5-2

Expand UPC-A to EAN-13 .............................................................5-2

System Number Transmission .......................................................5-2

UPC-A Minimum Reads ................................................................5-5

In-store Minimum Reads ..............................................................5-6

UPC-E ..............................................................................................5-8

Disable/Enable UPC-E ..................................................................5-8

Check Digit Transmission .............................................................5-8

System Number ..........................................................................5-8

Expand to UPC-E to UPC-A ...........................................................5-8

Expand UPC-E to EAN13 ..............................................................5-8

Minimum Reads ........................................................................ 5-11

GTIN .......................................................................................5-12

Disable/Enable GTIN ..................................................................5-12

EAN-13 ..........................................................................................5-13

Disable/Enable EAN-13 ..............................................................5-13

Check Digit Transmission ........................................................... 5-13

EAN-13 Flag 1 Character ............................................................ 5-13

ISBN .......................................................................................5-13

Minimum Reads ........................................................................ 5-16

EAN-8 ............................................................................................5-17

Disable/Enable EAN-8 ................................................................5-17

Check Digit Transmission ........................................................... 5-17

Minimum Reads ........................................................................ 5-19

Add-ons .........................................................................................5-20

RSS-14 ..........................................................................................5-22

Disable/Enable RSS-14 ..............................................................5-22

UCC/EAN 128 Emulation ............................................................ 5-22

RSS-14 — continued ................................................................. 5-24

Minimum Reads ........................................................................ 5-24

RSS Expanded ................................................................................5-25

Disable/Enable RSS Expanded .................................................... 5-25

UCC/EAN 128 Emulation ............................................................ 5-25

RSS Expanded — continued ........................................................5-26

Length Control .......................................................................... 5-26

RSS Expanded — continued ........................................................5-28

RSS Expanded Length 1, Length 2 Programming Instructions ..........5-28

Minimum Reads ........................................................................ 5-29

Product Reference Guide iii

Code 39 ........................................................................................ 5-30

Disable/Enable Code 39 ............................................................. 5-30

Check Character Calculation ....................................................... 5-30

Check Character Transmit .......................................................... 5-30

Start/Stop Characters ............................................................... 5-30

Code 39 Full ASCII ................................................................... 5-30

Length Control ......................................................................... 5-33

Code 39 Length 1, Length 2 Programming Instructions .................. 5-35

Quiet Zones........................................................................ 5-36

Code 39 Stitching ..................................................................... 5-37

Code 39 — continued ................................................................ 5-38

Minimum Reads ........................................................................ 5-38

Pharmacode 39 .............................................................................. 5-39

Disable/Enable Pharmacode 39 ................................................... 5-39

Start/Stop Characters ............................................................... 5-40

Check Character Transmit .......................................................... 5-40

Code 128 ....................................................................................... 5-41

Disable/Enable Code 128 ........................................................... 5-41

Transmit Function Characters ..................................................... 5-42

Length Control ......................................................................... 5-43

Code 128 — continued .............................................................. 5-45

Code 128 Length 1, Length 2 Programming Instructions ................ 5-45

Code 128 Stitching ................................................................... 5-46

Code 128 — continued .............................................................. 5-47

Minimum Reads ........................................................................ 5-47

Interleaved 2 of 5 ........................................................................... 5-48

Disable/Enable Interleaved 2 of 5 ............................................... 5-48

Check Digit Calculation .............................................................. 5-48

Check Digit Transmit ................................................................. 5-48

Length Control ......................................................................... 5-50

Interleaved 2 of 5 — continued .................................................. 5-52

Interleaved 2 of 5 Length 1, Length 2 Programming Instructions .... 5-52

Interleaved 2 of 5 — continued .................................................. 5-52

Interleaved 2 of 5 Stitching ....................................................... 5-53

Minimum Reads ........................................................................ 5-54

Codabar ........................................................................................ 5-55

Disable/Enable Codabar ............................................................ 5-55

Check Character Verification ...................................................... 5-55

Check Character Transmit .......................................................... 5-55

Length Control ......................................................................... 5-57

Codabar — continued ................................................................ 5-59

Codabar Length 1, Length 2 Programming Instructions .................. 5-59

Quiet Zones........................................................................ 5-60

Start/Stop Character Type ......................................................... 5-61

Start/Stop Character Transmission ............................................. 5-61

Start/Stop Character Match ....................................................... 5-61

Codabar — continued ...................................................................... 5-64

Codabar Stitching ..................................................................... 5-64

Minimum Reads ........................................................................ 5-65

Code 93 ........................................................................................ 5-66

Disable/Enable Code 93 ............................................................. 5-66

Length Control ......................................................................... 5-67

iv PowerScan®7000

Code 93 Length 1, Length 2 Programming Instructions .................. 5-69

Code 93 Stitching ......................................................................5-70

Minimum Reads ........................................................................ 5-71

MSI/Plessey ...................................................................................5-72

Disable/Enable MSI/Plessey ........................................................5-72

Check Digit Verification ..............................................................5-72

Check Digit Transmit .................................................................5-72

Length Control .......................................................................... 5-75

MSI/Plessey Length 1, Length 2 Programming Instructions ............. 5-77

Scan the END bar code. .............................................................5-77

MSI/Plessey Stitching ................................................................5-78

MSI/Plessey — continued ........................................................... 5-79

Minimum Reads ........................................................................ 5-79

Standard 2 of 5 ...............................................................................5-80

Disable/Enable Standard 2 of 5 ................................................... 5-80

Check Digit Verification ..............................................................5-80

Check Digit Transmit .................................................................5-80

Length Control .......................................................................... 5-82

Standard 2 of 5 Length 1, Length 2 Programming Instructions ........5-84

Standard 2 of 5 Stitching ...........................................................5-85

Minimum Reads ........................................................................ 5-86

PDF 417 .........................................................................................5-87

Disable/Enable PDF 417 .............................................................5-87

Length Control .......................................................................... 5-88

PDF 417 — continued ................................................................ 5-90

PDF 417 Length 1, Length 2 Programming Instructions ..................5-90

Minimum Reads ........................................................................ 5-91

Optical and Read Performance Parameters ........................................... A-1

Physical Properties ........................................................................... A-2

Electrical Parameters ........................................................................ A-2

Environmental Parameters ................................................................. A-3

Other Parameters ............................................................................. A-3

Standard Cable Pinouts (Primary Interface Cables) ............................... B-1

RS-232 ..................................................................................... B-1

IBM Port 5B/9B/17 ..................................................................... B-1

IBM USB ................................................................................... B-2

USB & USB Keyboard .................................................................. B-2

Wand Emulation ........................................................................ B-2

Keyboard Wedge ........................................................................ B-3

Defaults by Symbology ..................................................................... D-1

Interface Default Exceptions .............................................................. D-2

IBM Interfaces ........................................................................... D-2

RS-232 Wincor/Nixdorf ............................................................... D-3

Keyboards ................................................................................. D-4

Keyboard Model Cross Reference .........................................................E-1

Accepting RS-232 Commands .............................................................F-1

Product Reference Guide 1-1

Chapter 1

Getting Started

The PowerScan®7000 Linear Imager marks a new performance level for

handheld scanners. It delivers aggressive read rates and depths of field on

1D and stacked codes. This aggressiveness applies even in challenging

reading environments where low lighting conditions and poor quality

might make it difficult to read bar codes. You can rest assured your

investment will continue to supply years of use by reading any bar codes

you require, now or in the future.

Designed for today’s demanding commercial and industrial environ-

ments, the scanner offers superior image quality, speed, durability, and

the ability to read poor quality bar codes. The unit is comfortable to

hold, easy to use, rugged, and excellent for the most demanding applica-

tions.

About This Manual

This Product Reference Guide (PRG) provides programming instruc-

tions for the scanner, plus product specifications and dimensions. For

installation, maintenance, troubleshooting and warranty information,

see the Quick Reference Guide (QRG). Copies of other publications for

this product are downloadable free of charge from the PSC website listed

on the back cover of this manual.

The scanner is factory programmed for the most common terminal and

communications settings. If you need to change these settings, program-

ming is accomplished by scanning the bar codes in this guide.

Bold text and a yellow-highlighted background indicates the most com-

mon default setting for a feature/option.

Getting Started

1-2 PowerScan®7000 Linear Imager

Manual Conventions

The symbols listed below are used in this manual to notify the reader of

key issues or procedures that must be observed when using the scanner:

Connecting the Scanner

Use the appropriate instructions below to connect the scanner to the ter-

minal, PC or other host device. The scanner kit you ordered to match

your interface should provide a compatible cable for your installation.

The scanner cable connection is secured using the “clamshell” retainer

referenced in the enlarged area of Figure 1. Fit and clamp the retainer

over the cable connector as shown in the illustration, then fully seat the

cable assembly into the scanner, aligning both the connector and the

retainer boss with their respective openings. Secure the captive screws.

Upon completing the connection via the appropriate interface instruc-

tions below, proceed to the Interface Related Features section of this man-

ual and scan the bar code to select the correct interface type.

RS-232 Serial Connection —

Turn off power to the terminal/PC

and connect the scanner to the terminal/PC serial port via the RS-232

cable as shown in Figure 1. If the terminal will not support POT (Power

Off the Terminal) to supply scanner power, use the approved power sup-

ply (AC Adapter). Plug the AC Adapter barrel connector into the socket

on the RS-232 cable connector and the AC Adapter plug into a standard

power outlet.

NOTE

Notes contain information necessary for prop-

erly diagnosing, repairing and operating the

scanner.

CAUTION

The CAUTION symbol advises you of actions

that could damage equipment or property.

Connecting the Scanner

Product Reference Guide 1-3

Figure 1

. RS-232 Serial Connection

USB Connection —

Connect the scanner to a USB port on the termi-

nal/PC using the correct USB cable for the interface type you ordered.

Reference Figure 2.

Figure 2. USB Connection

Captive

Screws

Retainer Boss

Cable Connector

or...

Getting Started

1-4 PowerScan®7000 Linear Imager

Wand Emulation Connection —

Connect the scanner to the appro-

priated port on the terminal/PC using the correct cable for the interface

type you ordered. Reference Figure 2.

IBM Connection —

Connect the scanner to the IBM port on the ter-

minal/PC using the correct IBM cable. Reference Figure 2.

Keyboard Wedge Connection —

The Keyboard Wedge cable has a

‘Y’ connection from the scanner. Connect the female to the male end

from the keyboard and the remaining end at the keyboard port at the

terminal/PC. Reference Figure 2.

Programming

The scanner is typically factory-configured with a set of default features

standard to the interface type you ordered. After scanning the interface

bar code from the Interface Related Features section, you can select other

options and customize your scanner through use of the instructions and

programming bar codes available in that section and also the Data Editing

and Symbologies chapters of this manual.

Resetting the Standard Product

Defaults

If you aren’t sure what programming options are in your scanner, or

you’ve changed some options and want the factory settings restored, scan

the Standard Product Default Settings bar code below. This will copy the

factory configuration for the currently active interface to the current

configuration.

The programming section lists the factory default settings for each of the

menu commands (indicated by shaded blocks and bold text) on the fol-

lowing pages.

Standard Product Default Settings

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali PSC Lettore di codici a barre

PSC

PSC QuickScan 6000 Manuale utente

PSC

PSC LM520 Manuale del proprietario

PSC

PSC LazerData Series 9000E Manuale utente

PSC

PSC Magellan 8500 Manuale utente

PSC

PSC SP400 Istruzioni operative

PSC

PSC QuickScan 3000 Manuale di installazione e funzionamento

PSC

PSC Duet Manuale

PSC

PSC HD Manuale utente

PSC

PSC Magellan 2200VS omega Manuale utente

PSC

PSC vs1200 Manuale utente

PSC

PSC LazerData 12000 Series Manuale utente

PSC

PSC QuickScan QS6500 Manuale utente

PSC

PSC magellan 8100 Manuale utente

PSC

PSC PowerScanTM RF Manuale utente

PSC

PSC MAGELLAN 1000I Manuale utente

PSC

PSC QS200 Manuale del proprietario

PSC

PSC PowerScan RF Guida utente

PSC

PSC Duet Manuale utente

PSC

PSC MAGELLAN 1000I Manuale di installazione e funzionamento

PSC

PSC PowerScan Handheld Istruzioni operative

PSC

PSC QuickScan QS2500 Manuale utente

PSC

PSC Scanners Istruzioni operative

PSC

PSC HS1250, Manuale utente

PSC

PSC QRG QuickScan QS3500 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente