Pulsar W150 Manuale utente
ENGLISH
CAL. W150
DIGITAL QUARTZ
●Time/calendar
●Stopwatch with 75 lap/split memory
●Countdown timer
●Daily alarm
●Electroluminescent panel
English
2
MODE CHANGE
TIMERALARM
➡
➡
➡
TIME/CALENDAR MEMORY RECALL
➡
STOPWATCH
➡
A
With each press,
the mode changes
in order.
English
3
TIME/CALENDAR MODE
C
▲
D
▲
E
▲
Press for 2 to 3 seconds.
Select the digits to be adjusted.
Set the flashing digits.
TIME/CALENDAR SETTING
Selection of the digits
Seconds Minutes Hour
➾
➾
Date
➾
Month
➾
Year
➾
➾
▲
C
▲
Return to TIME/CALENDAR mode.
A
E
C
D
Witheachpress,changeoverbetween
12- and 24-hour indications is made.
A
English
4
STOPWATCH MODE
●The stopwatch measures up to 23 hours, 59 minutes and 59 seconds in 1/100
second increments for the first 1 hour, and in 1 second increments thereafter.
Start / Stop / Restart ED
Reset /
Measure lap time &
split time
Lap time/split time measurement
E
START
▲
D
LAP/
SPLIT
▲
D
LAP/
SPLIT
▲
• • • • D
FINISH
(Final lap/split)
▲
E
END
▲
D
RESET
English
5
MEMORY RECALL MODE
●The stored data can be recalled block by block after the measurement.
MEMORY RECALL OPERATION
D
▲
D
▲
E
Press to show the BLOCK
SELECTION display.
Press repeatedly to select the desired
block of data.
Press to recall the stored data in the
block.
* The lap/split number is displayed first,
and then the lap time and split time
are displayed in the upper and lower
rows, respectively.
* With each press of button E, the stored
data is recalled successively from the
oldest to the newest.
E D
Number of storable data
English
6
HOW TO CLEAR THE STORED DATA
●To erase the data block by block:
D
▲
C
Press in the BLOCK SELECTION display to select the block of data
to be erased.
Press and hold until “DEL” appears.
* The data only in the selected block is erased from memory.
●To erase the data in all the blocks at a stretch:
CIn the BLOCK SELECTION display with any block number shown,
press and hold until “FREE” appears.
* The data in all the blocks is erased from memory.
English
7
TIMER MODE
●The timer can be set up to 23 hours, 59 minutes and 59 seconds in second
increments.
TIMER SETTING
C
▲
D
▲
E
▲
Press for 2 to 3 seconds.
Set the flashing digits.
▲
CReturn to TIMER mode.
Select the digits to be adjusted.
Selection of the digits
Seconds Minutes Hour
➾
➾
➾
E
C
D
Set time
Current time
English
8
TIMER OPERATION
Start / Stop / Restart EDReset
* When the set time is up, a warning sound beeps for 10 seconds. To stop it manually,
press any of the buttons.
* After the set time is up, the timer counts up the time up to 23 hours, 59 minutes and
59 seconds as many times as necessary unless stopped and reset.
English
9
ALARM MODE
ALARM SETTING
C
▲
D
▲
E
▲
Press for 2 to 3 seconds.
Set the flashing digits.
▲
CReturn to ALARM mode.
E
C
D
Select the digits to be adjusted
(minutes/hour).
English
10
Alarm mark
[ ]
[ Alarm engaged ]
E
With each press,
the alarm is engaged and
disengaged alternately.
Hourly time
signal mark
[ ]
Alarm engagement/disengagement
Turning on/off of hourly time signal and
button operation confirmation sound
With each press in TIME/
CALENDAR mode, the hourly
timesignalandbuttonoperation
confirmation sound are turned
on and off alternately. E
Indice
Altri manuali Pulsar Orologio
Pulsar
Pulsar KINETIC 5M42 Manuale utente
Pulsar
Pulsar W854 Manuale utente
Pulsar
Pulsar CAL. VD53 Manuale utente
Pulsar
Pulsar 7S26 Manuale utente
Pulsar
Pulsar NX01 Manuale utente
Pulsar
Pulsar V658 Manuale utente
Pulsar
Pulsar 1N00 Manuale utente
Pulsar
Pulsar W522 Manuale utente
Pulsar
Pulsar 7T62 Manuale utente
Pulsar
Pulsar VD84 Manuale utente
Pulsar
Pulsar Z46H Manuale utente
Pulsar
Pulsar VD31 Manuale utente
Pulsar
Pulsar W860 Manuale utente
Pulsar
Pulsar w863 Manuale utente
Pulsar
Pulsar VX42 Manuale utente
Pulsar
Pulsar W621 Manuale utente
Pulsar
Pulsar NX04 Manuale utente
Pulsar
Pulsar VK83 Manuale utente
Pulsar
Pulsar V33J Manuale utente
Pulsar
Pulsar VK63 Manuale utente
