MAIN FEATURES
1. High Quality Picture - No Signal Loss and Digital Noise Free
Our switchers are built to deliver the highest quality picture preserving the native
resolutions of the video sources without any signal loss. At the same time, the digital noises
that may affect the picture quality will be eliminated. Due to the nature of the digital signals
and passing through multiple stages of connection when using switchers, it is important to
eliminate the digital noises and boost the signal strength to preserve/enhance the video
signal quality.
2. Signal Amplification for signal reliability and long length signal transmission.
Our 5V power adapter supplies adequate power to amplify the video signals from different video
sources. This is necessary as the overall length from the video source to the displays is longer
when using the switches (distance from the video source to the switch + distance from the
switch to the display). In most cases, the overall distance that the DVI signal will need to travel
is over 10ft. Due to the nature of DVI signals, amplification is necessary to warrant the video
quality and reliability. (Without amplification, there may be occasional blackouts or blinking
effects) With this amplification feature, your video display can be extended up to 2300ft using
our fiber optical DVI cables.
3. Compact and Practical Design
Our switchers have all of the DVI ports, power supply jack and RS232 port in the back of the unit
allowing it to be mounted on any racks or with any other components. In the front, there will be
a remote control sensor, selector switch, RS232 LED indicators and channel indicators.
4. Remote Control Unit with Discreet Channel selections
Remote Control Units with discreet channel selection feature is included in all our switches.
The channel buttons on the remote control unit will allow you to change video sources easily
and quickly.
5. RS232 Control
Our switches also feature RS232 Control. Our switches are capable of being controlled by a
remote computer. This is extremely helpful for many applications where you need to
automatically switch the video inputs. Example: If you connect a PC to our switcher, you can
program it to automatically switch the sources. If you want to display input 1 for 1 hour and then
switch to input 2, you can do this with the PC. The RS232 LED indicators in the front will allow
you to check the communication between the PC and the switch. Most other products require
additional control box for this function.
