PVI BAR1636 Manuale utente

ITEM #0361648

MODEL #TH2432

THRESHOLD RAMP

Español p. 8

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-442-8347, 8 a.m. - 8 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

ITEM #0361643

MODEL #WCR630

MULTI-FOLD RAMP

Español p. 10

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-442-8347, 8 a.m. - 8 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

ITEM #0361648

MODEL #TH2432

THRESHOLD RAMP

Español p. 8

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-877-442-8347, 8 a.m. - 8 p.m., EST, Monday - Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

MODEL • BAR1636

• BAR2436

Call our customer service department at

1-800-554-7267, 7 a.m. - 5 p.m., CST, Monday - Friday.

BARIATRIC

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Threshold Ramp 1

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Threshold Ramp 1

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Left Side Ramp Panel 1

B Right Side Ramp Panel 1

HARDWARE CONTENTS (shown actual size)

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

• Ramps are designed for wheelchairs and electric scooters.

• Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed

loads.

• Although ramp is equipped with anti-slip traction tape, caution is required as some factors can

reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on

the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of

human stride. Caution should also be taken regarding type of floor finish and possible human

error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and

require users to use caution under field conditions as outlined here.

• For your safety, a caregiver or aid should be present at all times when using any ramp.

• Proper setup is essential for safe loading and unloading.

• Make sure that the hook (top end) is pressed firmly against the step or platform before using.

• When possible, use screws provided to lock ramp in place.

• Safe lifting practices should be used when lifting product.

• The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height

of step/platform not to exceed 2 inches.

• Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.

WARNING

Phillips Sheet

Metal Screw

Qty. 2

SAFETY INFORMATION

HARDWARE CONTENTS (shown actual size)

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

• Ramps are designed for wheelchairs and electric scooters.

• Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed

loads.

• Although ramp is equipped with anti-slip traction tape, caution is required as some factors can

reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on

the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of

human stride. Caution should also be taken regarding type of floor finish and possible human

error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and

require users to use caution under field conditions as outlined here.

• For your safety, a caregiver or aid should be present at all times when using any ramp.

• Proper setup is essential for safe loading and unloading.

• Make sure that the hook (top end) is pressed firmly against the step or platform before using.

• When possible, use the clevis pins provided to lock ramp in place.

• Safe lifting practices should be used when lifting product.

• The Americans with Disabilities Act recommends a 1:12 slope; for 6-foot ramp a maximum height

of step/platform not to exceed 6 inches.

• Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.

CAUTION

• When carrying ramp sections, always use handles and make sure hook-and-loop straps are

secure.

Clevis Pin

Qty. 2

WARNING

HARDWARE CONTENTS (shown actual size)

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

• Ramps are designed for wheelchairs and electric scooters.

• Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed

loads.

• Although ramp is equipped with anti-slip traction tape, caution is required as some factors can

reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on

the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of

human stride. Caution should also be taken regarding type of floor finish and possible human

error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and

require users to use caution under field conditions as outlined here.

• For your safety, a caregiver or aid should be present at all times when using any ramp.

• Proper setup is essential for safe loading and unloading.

• Make sure that the hook (top end) is pressed firmly against the step or platform before using.

• When possible, use screws provided to lock ramp in place.

• Safe lifting practices should be used when lifting product.

• The Americans with Disabilities Act recommends a 1:12 slope; for 2-foot ramp a maximum height

of step/platform not to exceed 2 inches.

• Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.

WARNING

Phillips Sheet

Metal Screw

Qty. 2

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble

the product.

Estimated Installation Time: 10 minutes

Helpful Tools (not included): Drill with 5/16 bit (wood, metal, or masonry depending on what type of

surface you will be drilling pin holes into); Pen/Pencil

SAFETY INFORMATION

HARDWARE CONTENTS (shown actual size)

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

• Ramps are designed for wheelchairs and electric scooters.

• Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed

loads.

• Although ramp is equipped with anti-slip traction tape, caution is required as some factors can

reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on

the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of

human stride. Caution should also be taken regarding type of floor finish and possible human

error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and

require users to use caution under field conditions as outlined here.

• For your safety, a caregiver or aid should be present at all times when using any ramp.

• Proper setup is essential for safe loading and unloading.

• Make sure that the hook (top end) is pressed firmly against the step or platform before using.

• When possible, use the clevis pins provided to lock ramp in place.

• Safe lifting practices should be used when lifting product.

• The Americans with Disabilities Act recommends a 1:12 slope; for 6-foot ramp a maximum height

of step/platform not to exceed 6 inches.

• Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.

CAUTION

• When carrying ramp sections, always use handles and make sure hook-and-loop straps are

secure.

Clevis Pin

Qty. 2

WARNING

Before beginning assembly of product, make sure all parts are present.

Compare parts with package contents list and hardware contents. If any part is

missing or damaged, do not aempt to assemble the product.

Esmated Installaon Time: 8 minutes

Helpful Tools (not included): Drill with 11/64 bit (wood, metal, or masonry

depending on what type of surface you will be drilling pin holes into); Pen/

Pencil.

Ramps are designed for wheelchairs and electric scooters.

Ramps are rated for a 800 pound capacity; rang is based on double axle, evenly

distributed loads.

Although ramp is equipped with an-slip tracon tape, cauon is required as

some factors can reduce slip-resistant capabilies. Such factors include, but are

not limited to, degree of wear on the shoe and ooring material; presence of

foreign material such as water, oil and dirt; length of human stride. Cauon should

also be taken regarding type of oor nish and possible human error due to

physical and mental condions. An-slip properes apply to laboratory condions

and require users to use cauon under eld condions as outlined here.

For your safety, a caregiver or aid should be present at all mes when using any

ramp.

Proper setup is essenal for safe loading and unloading.

Make sure that the hook (top end) is pressed rmly against the step or plaorm

before using.

When possible, use screws provided to lock ramp in place.

Safe liing pracces should be used when liing product.

The Americans with Disabilies Act recommends a 1:12 slope; for 2-foot ramp a

maximum height of step/plaorm not to exceed 2 inches.

Failure to follow all warnings/instrucons may result in ramp slipping o step

while occupied.

Please read and understand this enre manual before aempng to assemble, operate

or install the product.

SAFETY INFORMATION

HARDWARE CONTENTS (shown actual size)

Please read and understand this entire manual before attempting to assemble, operate or install

the product.

• Ramps are designed for wheelchairs and electric scooters.

• Ramps are rated for a 600 pound capacity; rating is based on double axle, evenly distributed

loads.

• Although ramp is equipped with anti-slip traction tape, caution is required as some factors can

reduce slip-resistant capabilities. Such factors include, but are not limited to, degree of wear on

the shoe and flooring material; presence of foreign material such as water, oil and dirt; length of

human stride. Caution should also be taken regarding type of floor finish and possible human

error due to physical and mental conditions. Anti-slip properties apply to laboratory conditions and

require users to use caution under field conditions as outlined here.

• For your safety, a caregiver or aid should be present at all times when using any ramp.

• Proper setup is essential for safe loading and unloading.

• Make sure that the hook (top end) is pressed firmly against the step or platform before using.

• When possible, use the clevis pins provided to lock ramp in place.

• Safe lifting practices should be used when lifting product.

• The Americans with Disabilities Act recommends a 1:12 slope; for 6-foot ramp a maximum height

of step/platform not to exceed 6 inches.

• Failure to follow all warnings/instructions may result in ramp slipping off step while occupied.

CAUTION

• When carrying ramp sections, always use handles and make sure hook-and-loop straps are

secure.

Clevis Pin

Qty. 2

WARNING

•

INSTALLATION INSTRUCTIONS

1. Carefully place threshold ramp (A) with top end

(end with holes) on the step or landing area.

Make sure hook is pressed firmly against step.

Locate both holes at end of the threshold ramp

(A). Mark the pin locations using a pen/pencil.

Hardware Used

Remove the threshold ramp (A) and then, using

a drill and 11/64 bit, drill a hole approximately 2

inches deep.

3. Replace the threshold ramp (A) and insert the

Phillips sheet metal screws (AA) into the holes

to secure it in place.

AA x 2

Phillips Sheet

Metal Screw

INSTALLATION INSTRUCTIONS

4. Locate both holes at end of the ramp. Mark the

pin locations using a pen/pencil.

Hardware Used

Remove the ramp and then, using a drill

and 5/16 bit, drill a hole approximately 2 inches

deep.

6. Now place the ramp back to the desired

location and drop clevis pins (AA) into

the holes to secure the ramp in that location.

AA x 2

Clevis Pin

INSTALLATION INSTRUCTIONS

1. Carefully place threshold ramp (A) with top end

(end with holes) on the step or landing area.

Make sure hook is pressed firmly against step.

Locate both holes at end of the threshold ramp

(A). Mark the pin locations using a pen/pencil.

Hardware Used

Remove the threshold ramp (A) and then, using

a drill and 11/64 bit, drill a hole approximately 2

inches deep.

3. Replace the threshold ramp (A) and insert the

Phillips sheet metal screws (AA) into the holes

to secure it in place.

AA x 2

Phillips Sheet

Metal Screw

Carefully place threshold ramp (A)

with top end (end with holes) on

the step or landing area. Make sure

hook is pressed rmly against step.

Locate both holes at end of the

threshold ramp (A). Mark the pin

locaons using a pen/pencil.

Remove the threshold ramp (A) and

then, using a drill and 11/64 bit,

drill a hole approximately 2 inches

deep.

Replace the threshold ramp (A)

and insert the Phillips sheet metal

screws (AA) into the holes to secure

it in place.

CARE AND MAINTENANCE

These ramps are maintenance free, but to keep product in excellent condition follow these tips.

• Store in a cool dry place when not in use.

• Keep ramp clean and free of debris.

• Do not leave ramp out during harsh weather conditions.

• If ice or snow accumulates on ramp, do NOT use metal objects to remove. Instead, use plastic

shovel or non-corrosive ice melt.

These ramps are maintenance free, but to keep product in excellent

condion follow these ps.

• Keep ramp clean and free of debris.

• If ice or snow accumulates on ramp, do NOT use metal objects

to remove. Instead, use plasc shovel or non-corrosive

ice melt (labeled as “pet friendly” or “pet safe” ice melt).

WARRANTY

MANUFACTURER LIMITED WARRANTY

1. LIMITED LIFETIME WARRANTY — THE FOLLOWING APPLIES TO ALL END PURCHASERS

OTHER THAN RESIDENTS OF THE STATE OF CALIFORNIA*:

The manufacturer warrants to the original end purchaser of the product that the product is free from

defects in material and workmanship under normal use and service. This warranty does not apply to

any product that has been subject to misuse, abuse, neglect, alteration, accident, usage not in

accordance with product instructions, acts of God, or improper installation, or that has been used for

rental purposes or repaired by someone other than the manufacturer. This warranty does not cover

normal deterioration of the product due to wear and exposure.

*(FIVE YEAR WARRANTY — THE FOLLOWING APPLIES TO RESIDENTS OF THE STATE OF

CALIFORNIA: For a period of five years after the purchase of the product by the original end

purchaser of the product, the manufacturer warrants to the original end purchaser of the product that

the product is free from defects in material and workmanship under normal use and service. This

warranty does not apply to any product that has been subject to misuse, abuse, neglect, alteration,

accident, usage not in accordance with product instructions, acts of God, or improper installation, or

that has been used for rental purposes or repaired by someone other than the manufacturer. This

warranty does not cover normal deterioration of the product due to wear and exposure.)

2. This warranty is limited to repairing or replacing, at the option of the manufacturer, any product

that is returned to the manufacturer and is reasonably determined by the manufacturer to be

defective. The repair or replacement of a defective product under this warranty will be made by the

manufacturer without charge for parts or labor. This excludes shipping or delivery charges to and

from the manufacturer’s place of business. If the product has been discontinued, the manufacturer

may replace the product with a new product of comparable value and function. The manufacturer

also reserves the right to refund the purchase price as its exclusive warranty remedy.

3. Any claim alleging that the product fails to conform to this warranty may be made only by the

original end purchaser and only while such purchaser owns the product. A defective product that is

covered by this warranty must be returned, at the purchaser’s expense, along with proof of date of

original purchase (such as receipt, check or other document the manufacturer deems acceptable that

shows the date of purchase and the identity of the product and purchaser), along with a description of

the alleged defect, to the manufacturer.

4. EXCEPT AS SET FORTH HEREIN, THE MANUFACTURER MAKES NO WARRANTIES,

EXPRESSED OR IMPLIED, AND THE MANUFACTURER DISCLAIMS AND NEGATES ALL OTHER

WARRANTIES, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, CONFORMITY TO MODELS OR

SAMPLES, OR ANY WARRANTIES OR INDEMNITIES AGAINST INTELLECTUAL PROPERTY

INFRINGEMENT.

SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES, SO THESE

LIMITATIONS MAY NOT APPLY TO YOU. IN NO EVENT WILL THE MANUFACTURER BE LIABLE

FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR FOR ANY

LIABILITY IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT.

5. Before using the product, the purchaser must first determine the suitability of the product for its

intended use, and the purchaser assumes all risk and liability whatsoever in connection therewith.

6. No person, agent, distributor, dealer or company is authorized to change, amend or modify the

terms of this warranty.

7. This warranty gives the purchaser specific legal rights, and the purchaser may also have other

rights that vary from state to state.

8. The purchaser may not assign the purchaser’s rights or obligations under this warranty without

the prior written consent of the manufacturer.

Printed in the U.S.A.

MODELO • BAR1636

• BAR2436

Departamento de Servicio al Cliente

1-800-554-7267 de lunes a viernes de 7 a.m. a 5 p.m., hora estándar central.

ARTÍCULO #0361648

MODELO #TH2432

RAMPA PARA UMBRAL

¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro

Departamento de Servicio al Cliente al 1-877-442-8347, de lunes a viernes de 8 a.m. a 8

p.m., hora estándar del Este.

ADJUNTE SU RECIBO AQUÍ

Número de serie Fecha de compra

RAMPA BARIÁTRICA PARA UMBRAL

CONTENIDO DEL PAQUETE

PIEZA DESCRIPCIÓN CANTIDAD

A Rampa Para Umbral 1

CONTENIDO DEL PAQUETE

PIEZA DESCRIPCIÓN CANTIDAD

A Rampa Para Umbral 1

CONTENIDO DEL PAQUETE

PIEZA DESCRIPCIÓN CANTIDAD

A Rampa Para Umbral 1

ADITAMENTOS (se muestran en tamaño real)

INFORMACIÓN DE SEGURIDAD

Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el

producto.

• Las rampas están diseñadas para sillas de ruedas y triciclos eléctricos.

• Las rampas están clasificadas para una capacidad de 272,16 kg; la clasificación está basada en

cargas de doble eje distribuidas uniformemente.

• Aunque la rampa está equipada con cinta para tracción antideslizante, se debe tener cuidado, ya

que algunos factores pueden reducir la capacidad antideslizante. Tales factores incluyen, entre

otros, el grado de desgaste en el zapato y el material del piso, la presencia de materiales extra-

ños como agua, aceite y suciedad y el largo de los trancos humanos. Se debe tener cuidado en

relación con el tipo de acabado del piso y posibles errores humanos debido a condiciones físicas

y mentales. Las propiedades antideslizantes se aplican en condiciones de laboratorio y requieren

que los usuarios tengan cuidado en las condiciones en terreno como se describe aquí.

• Para su seguridad, un cuidador debe estar presente en todo momento cuando use cualquier

rampa.

• La configuración adecuada es esencial para una carga y descarga seguras.

• Asegúrese de que el gancho (extremo superior) esté presionado firmemente contra el escalón o

la plataforma antes de usar

• Cuando sea posible, use los tornillos provistos para fijar la rampa en su lugar.

• Se deben usar prácticas de elevación seguras cuando levante el producto.

• La Ley de Estadounidenses con Discapacidades recomienda una inclinación de 1:12; para una

rampa de 0,61 m, la altura máxima del escalón/plataforma no debe exceder los 5,08 cm.

• El incumplimiento de las advertencias/instrucciones podría causar que la rampa se deslice hasta

salirse del escalón mientras se utiliza.

ADVERTENCIA

Tornillo Phillips

para láminas

de metal

Cant. 2

ADITAMENTOS (se muestran en tamaño real)

Pasador de

horquilla