Pyle PDWM1902 Manuale utente

PDWM1902 • PDWM1904 • PDWM3375 • PDWM3378 • PDWM3400

USER’S MANUAL

UHF WIRELESS

MICROPHONE SYSTEM

• The Vocal Artist-UHF is a hand-held system designed for singers who desire the high quality

microphones and the freedom of wireless performance.

• The Presenter-UHF is a body-pack system designed for public speakers who prefer an inconspicuous,

hands-free lavaliere microphone.

• The Headset-UHF is a body-pack system designed for users in physically active applications, who desire

the freedom of hand-free microphone.

1. Power Button: Power ON/OFF the receiver.

2. Power Indicator: Indicate the power ON/OFF.

3. Channel Display: Indicates the frequency data of the selected channel group.

4. SET Function Button: Sets channel data.

5. "AF"Audio Level Indicator: Indicate the wireless system audio signal level.

6. "RF" signal indicator: it glows when the Receiver receive RF signal from Transmitter.

7. Antenna.

8. Volume Knob: Adjust the volume output of receiver.

9. XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of amplier, mixer.

10. 1/4" Audio Output Jack: Connect the audio cable from this jack to the input port of amplier, mixer.

11. Power Jack: Connect the AC/DC adapter to receiver.

CHANNEL RECEIVER

SYSTEM TYPE

SINGLE CHANNEL RECEIVER

1. Power Button: Power ON/OFF the receiver.

2. Power Indicator: Indicate the power ON/OFF.

3. Channel Display: Indicates the frequency data of the selected channel group.

4. SET Function Button: Sets channel data.

5. "AF"Audio Level Indicator: Indicate the wireless system audio signal level.

6. "RF" signal indicator: it glows when the Receiver receive RF signal from Transmitter.

7. Antenna.

8. Volume Knob: Adjust the volume output of receiver.

9. XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of amplier, mixer.

10. 1/4" Audio Output Jack: Connect the audio cable from this jack to the input port of amplier, mixer.

11. Power Jack: Connect the AC/DC adapter to receiver.

DUAL CHANNEL RECEIVER

MICROPHONE FUNCTIONS

TRANSMITTER FUNCTIONS

1. Grille: Protects the cartridge and help reducing the breath sounds and wind noise.

2. Channel Display: Indicates the frequency data of the selected channel group.

3. Down Function Button: Sets channel data.

4. Up Function Button: Sets channel data.

5. Power and Audio Mute Switch.

6. Battery Cover: Open it to install the battery.

1. Power and Audio Mute Switch.

2. Antenna: Transmit the RF signal of transmitter.

3. Belt Clip: Attach the transmitter to the belt.

4. Audio Input Jack: it is suitable for lavalier system/headset system.

5. Channel Display: Indicates the frequency data of the selected channel group.

6. Gain Adjusting Volume: Adjust the transmitter audio input gain.

7. State Setting Switch: Set the using state of lavalier system(L)/headset system(H).

8. Up Function Button: Sets channel data.

9. Down Function Button: Sets channel data.

RECEIVER CONNECTIONS

1. Receiver Power Connection: Connect the AC adapter into the DC power connector on the back of the

receiver. Plug the AC adapter into a AC 120V/220V 50Hz outlet.

2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown as below)

3. Audio Connection: Connect the audio cable from the audio output on the receiver to the input on your

amplier equipment.

BODYPACK TRANSMITTER CONNECTION

TRANSMITTER BATTERY INSTALLATION

MATCHINGWIRELESS FREQUENCY

(RECEIVER /TRANSMITTER CONNECTION)

1. Lavalier Microphone Connection: Connect the connector of supplied Lavalier microphone to the

connecting jack of transmitter (Shown as below) Set the transmitter work state in wireless lavaliere system.

2. Headset Microphone Connection: Connect the connector of supplied Headset microphone to the

connecting jack of transmitter(Shown as below) Set the transmitter work state in wireless headset system.

1. Battery Installation of Transmitter: Push open the battery cover, Insert the supplied batteries into

battery jar in polarity and cover the battery Cover.

1. Press and hold the “SET” button on the receiver --- then release the button once the receiver display

begins to ash.

2. When itis ashing, continue to press the “SET” button again to select the desired channel, the

selected channel will save automatically without any action for 5 seconds.

3. Power on your microphone/transmitter, press and hold the “UP” and “ DOWN” arrow keys once the CH

number on display begins to ash.

4. When it is ashing, press “UP” and “DOWN” arrow keys to select the same channel as chosen on

receiver, then, the selected channel will save automatically without any action for5 seconds.

5. Repeat steps 1-4 to connect an additional microphone / transmitter (For models PDWM3375,

PDWM3400)

TROUBLESHOOTING

PROBLEM INDICATOR STATUS SOLUTION

No Sound

Rod transmitter

indicator is not ashing

Slide transmitter POWER ON/

OFF switch ON position. Make

sure battery Is Inserted properly,

observing battery (+/-), If battery

is inserted properly, replace with

fresh battery.

Rod transmitter

indicator is ashing

Slide transmitter MUTE/ON

switch ON position.

Red receiver POWER light off

Make sure AC adapter is securely

plugged into a electrical outlet

and into DC input connector.

Make sure AC electrical outlet

works and supplies proper volt-

age.

Receiver signal indicators

A/B lights glowing

Turn up receiver volume control.

Conrm that the output connec-

tions from the receiver to the

external equipment are secure.

Receiver signal indicators A/B

lights off. Transmitter and receiv-

er POWER lights glowing.

Conrm transmitter’s and receiv-

er’s frequencies matches.

Move transmitter closer to the

receiver.

Sound level differs from level of

cabled instrument

Receiver signal indicators A/B

lights glowing

Adjust transmitter gain level to

compensatory.

Adjust receiver volume as neces-

sary.

Sound level differs with different

guitars.

Receiver signal indicators A/B

lights glowing.

Re-adjust transmitter gain level

to compensate for differences in

guitar outputs.

Distortion level increases grad-

ually

Receiver signal indicators A/B

lights and transmitter’s low bat-

tery light glowing

Replace transmitter battery

Bursts of noise or other audible

radio signals present Signal indicators A/B lights on

Identify potential sources of

interference (other RF sources)

and turn off, remove or use a

wireless system operating on a

different frequency.

Momentary loss of sound as

transmitter is moved around

performing area

Receiver signal indicators A/B

lights off when sound is lost.

Reposition receiver and perform

walk-through test again. If audio

dropouts persist, mark “dead“

spots and avoid them during

performance

UHF WIRELESS MICROPHONE SYSTEM

FEATURES AND SPECIFICATIONS

PDWM1902

System Features:

• UHF Microphone Signal Transmission

• Simple Setup & Hassle-Free Operation

• Operation Range: Up to 160'+ ft.

• LED Display for Channel Display & Power Indicator

• Selectable Frequency: (8) Available Audio Channels

• Audio Level Indicator: Displays Wireless Signal Strength

• RF Signal Indicator: Displays Transmitter Signal Strength

• Adjustable Rotary Volume Control

• 1/4" Audio Output Jack

• XLR Balanced Output Jack

Handheld Microphone Specs:

• Includes (1) Wireless Dynamic Mic

• LCD Display with Channel Readout

• RF Output: >10 dBm

• Modulation Type: FM

• Max Deviation: ±40 KHz

• Spurious Emission: >55 dBc

• Nominal Current Drain: < 40mA

• Battery Operated, Requires: (2) x 'AA' Batteries

• Dimensions: 9.25 x 1.9 x 1.9 in

Receiver Specs:

• Image & Spurious Rejection: >70 dB

• Signal / Noise Ratio: -105dB

• T.H.D.: < 1%

• Audio Output Level: 0-300 mV

• Power Supply: 110/220V (12-15V Power Adapter)

• Dimensions: 6.8 x 5.3 x 1.7 in

• Sold as: Kit

• Weight: 2.62 lbs.

PDWM1904

System Features:

• UHF Band Microphone System

• Simple Setup & Hassle-Free Operation

• Operation Range: Up to 160'+ ft.

• LED Display Screens for Audio Channel & Power Indicator

• Audio Level Indicator: Displays Wireless Audio Signal Strength

• RF Signal Indicator: Display Transmitter Signal Strength

• Adjustable Rotary Volume Control

• 1/4'' Audio Output Jack

• XLR Balanced Output Jack

What's in the Box:

• Microphone Receiver

• (1) Body-Pack Transmitter

• (1) Headset Mic

• (1) Lavalier Mic

Body-Pack Transmitter Specs:

• RF Output: >10 dBm

• Modulation Type: FM

• Max Deviation: ± 40 KHz

• Spurious Emission: > 55 dBc

• Nominal Current Drain: < 40mA

• Power Requirements: 2 x 1.5V AA

Receiver Specs:

• Signal / Noise Ratio: -105dB

• Border Upon Channel Rejection: > 70 dB

• T.H.D.: < 1%

• Audio Output Level: 0-300 mV

• Power Supply: 110/220V (12-15V Power Adapter)

• Dimensions 6.8 x 5.3 x 1.7 in

• Sold as: Kit

• Weight: 2.5 lbs.

PDWM3375

System Features:

• UHF Band Microphone System

• Simple Setup & Hassle-Free Operation

• Operation Range: Up to 160'+ ft.

• LED Screen Displays Audio Channel & Power Indicator

• Audio level indicator for wireless signal

• RF Signal Indicator for transmitter signal strength

• Independent & adjustable channel volume controls

• Selectable Frequency Range: Up to (8) Channels

• 1/4" Audio Output Jack

• XLR Balanced Output Jack

Receiver Specs:

• Signal / Noise Ratio: -105dB

• Border Upon Channel Rejection: >70dB

• T.H.D.: < 1%

• Audio Output Level: 0-300 mV

• Dimensions 6.8 x 5.3 x 1.7 in

Handheld Mic Specs:

• Includes (2) Wireless Dynamic Microphones

• RF Output: >10 dBm

• Modulation Type: FM

• Max Deviation: ± 40 KHz

• Spurious Emission: > 55 dBc

• Nominal Current Drain: < 40mA

• Battery Powered, Requires (2) x 'AA' Batteries -Each

• Dimensions: 9.25 x 1.9 x 1.9 in

• Power Supply: 110/220V (12-15V Power Adapter)

• Sold as: Kit

• Weight: 3.12 lbs.

Altri manuali per PDWM1902

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Sistema microfonico popolari di altre marche

Paso

Paso R824 Manuale utente

Naxa

Naxa NAM-982 Manuale utente

Motorola

Motorola PMNN4461 Manuale utente

Xvive

Xvive U3 Manuale utente

Tekon

Tekon DUOS Manuale utente

Heyuan Intelligence

Heyuan Intelligence IOT-G2S-01 Manuale utente

Devine

Devine WMD-IE Manuale utente

LG LF-D7150 Manuale utente

GE S768DAV Manuale utente

LD U305 HBH 2 Manuale utente

Chainway

Chainway URA8 Manuale utente

ORATOR

ORATOR D860TD Manuale utente

Sennheiser

Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuale utente

Alpha Technologies

Alpha Technologies RBMS Manuale utente

SWIT Electronics Co.,LTD.

SWIT Electronics Co.,LTD. CW-S150 Manuale utente

Shure

Shure UA844 Manuale utente

Panasonic

Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuale utente

Airspan

Airspan AS4000 Guida