Qeedji NAPOE109kt Manuale utente
User manual
NAPOE109kt
1.10.12 002B
2
Legal notice
NAPOE109kt 1.10.12 (002B_en)
© 2021 Qeedji
Rights and Responsibilities
All rights reserved. No part of this manual may be reproduced in any form or by any means whatsoever. or by any means whatsoever without the
written permission of the publisher. The products and services mentioned herein may be trademarks and/or service marks of the publisher. or
trademarks of their respective owners. The publisher and the author do not claim any rights to these Marks.
Although every precaution has been taken in the preparation of this document, the publisher and the author assume no liability for errors or
omissions, or for damages resulting from the use of the information contained in this document or the use of programs and source code that can go
with it. Under no circumstances can the publisher and the author be held responsible for any loss of profits or any other commercial prejudice caused
or alleged to have been caused directly or indirectly by this document.
Product information
Product design and specifications are subject to change at any time and `Qeedji` reserves the right to modify them without notice. This includes the
hardware, the embedded software and this manual, which should be considered as a general guide to the product. The accessories supplied with the
product may differ slightly from those described in this manual, depending on the developments of the various suppliers.
Precautions for use
Please read and heed the following warnings before turning on the power: - installation and maintenance must be carried out by professionals. - do
not use the device near water. - do not place anything on top of the device, including liquids (beverages) or flammable materials (fabrics, paper). - do
not expose the device to direct sunlight, near a heat source, or in a place susceptible to dust, vibration or shock.
Warranty clauses
The `Qeedji` device is guaranteed against material and manufacturing defects for a certain duration. Check the device warranty duration value at the
end of the document. These warranty conditions do not apply if the failure is the result of improper use of the device, inappropriate maintenance,
unauthorized modification, operation in an unspecified environment (see operating precautions at the beginning of the manual) or if the device has
been damaged by shock or fall, incorrect operation, improper connection, lightning, insufficient protection against heat, humidity or frost.
WEEE Directive
This symbol means that your appliance at the end of its service life must not be disposed of with household waste, but must be taken to a collection
point for waste electrical and electronic equipment or returned to your dealer. Your action will protect the environment. In this context, a collection
and recycling system has been set up by the European Union.
3
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
2.1
2.2
3.1
4.1
Table of contents
Part I : Description and installation
Introduction
Faces
Device dimensions
Labelling
Connectors
KRONE connector crimping
Diagnostic test
Device fixture
Device uninstallation
KRONE connector removing
KRONE connector insertion
Part II : Technical information
Technical specifications
Conformities
Part III : Contacts
Contacts
Part IV : Appendix
Appendix: Type B or type A RJ45 cable PIN out
4
Part I Description and installation
5
1.1 Introduction
The NAPOE109kt device is a dual role data Ethernet to TAB10s adapter. Once connected to a Ethernet cable supporting PoE, it can provide power
supply and IP network connectivity to a TAB10s device.
The NAPOE109kt device is intended to be crimped through a KRONE connector, on an Ethernet multi-stranded cable supporting PoE IEEE802.3af (5E
category minimum) then to be fixed inside a wall flush-mounted box.
This manual explains how to:
crimp the provided KRONE connector,
install the NAPOE109kt device,
test the power connectivity of the KRONE connector.
Recommendations and warnings
This device is designed for indoor use only.
◬
In the nominal mode, it is normal that the device is hot. It is advised to take precaution before handling the device with your hand.
Package Contents
Articles Description Quantity
Device NAPOE109kt device 1
KRONE connector Removable connector to be crimped on a network cable 1
Cable clamp Clamp to tighten the network cable on the NAPOE109kt device 1
Serrated washers Ensure the tightness of the NAPOE109kt device on the wall flush-mounted box
Internal ∅: 3.2 mm (0.118 "), external ∅: 6 mm (0.236 "), thickness: 2 mm (0.078 ") 2
☛ When coming straight from factory, the KRONE connector is already plugged on the NAPOE109kt device.
6
1.2 Faces
Side face
1 electrical pads supporting data and power delivery,
2 bevelled support to hang the TAB10s device,
3 removable KRONE connector ,
4 power red LED,
5 status green LED for network gigabit connection ,
6 status green LED for network activity,
7 dipswitch allowing to:
activate or inativate the LED lightening,
activate or inactivate the data and power connectivity on the POGO connector or on the USB-C connector,
8 holes to host screws to lock the TAB10s device on the NAPOE109kt device,
10 holes to fix the device on the wall flush-mounted box.
Front face
1 electrical pads supporting data and power delivery,
2 bevelled support to hang the TAB10s device,
10 11 12 13 ¹ holes to fix the device on a wall flush-mounted box.
8 9 holes hosting screws to lock the TAB10s device on the support.²
¹ It is advised to mount the wall flush-mounted box with a specific orientation. For further information, refer to the chapter § Device fixture.
² The suitable screws are provided with the TAB10s device.
Rear face
1
2
3
4
5
6
7
8
10
1
2
8
9
10
11
12
13
8
1.3 Device dimensions
9
1.4 Labelling
Product label
The model of the device, the power supply characteristics, the serial number (PSN) and the MAC address are written on a label stuck on the case.
☛ The QR code on the product label is corresponding to the product identification URL, for example:
i.qeedji.tech?model=NAPOE109kt&sn=01400-00001&mac.lan1=00-1C-E6-02-52-64 .
☛ FCC certification in pending.
Packingbox label
This is the label stuck also on the packingbox. It is showing:
the device model,
the product serial number (PSN) (embedded also in the QR code),
the manufacturer Web site.
☛ The QR code on the packingbox label is corresponding to the product PSN, for example:
PSN01400-00001 CD0 .
Some additional labels may be present in case of built-in options.
☛ The serial number of the device could be requested in case of technical support.
10
1.5 Connectors
KRONE connector
The KRONE connector needs to be crimped on a Ethernet multi-stranded cable. For further information, refer to the chapter § KRONE connector
crimping.
Dipswitch
In the default factory configuration, the dipswitch is configured in nominal mode 1.
In the nominal mode, dual role data and power delivery are supported over the electric pad of the POGO connector,
If a external power supply is detected over the USB type C connector, this power supply is used and the one coming from the PoE cable is not used.
☛ In the nominal mode the LEDs lightening is inactived.
To set the device in diagnostic mode 2, helped with a pencil lead, set the dipswitch to the left.
☛ In diagnostic mode, the LED lightening for power and network activity is activated.
After having completed the diagnostic test, helped with a pencil lead, set the dipswitch back to the right in nominal mode. For further information,
refer to the chapter § Diagnostic test.
1
2
Indice
Altri manuali Qeedji Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
