Qeedji SMH300 Manuale utente
User manual
SMH 30 0
4.13.14 0 0 2C
2
Legal notice
SMH 30 0 4.13.14 (0 0 2C_ en)
© 2020 Qeedji
Rights and Responsibilities
All rights reserved. No part of this manual may be reproduced in any form or by any means whatsoever. or by any means whatsoever without the
written permission of the publisher. The products and services mentioned herein may be trademarks and/or service marks of the publisher. or
trademarks of their respective owners. The publisher and the author do not claim any rights to these Marks.
Although every precaution has been taken in the preparation of this document, the publisher and the author assume no liability for errors or
omissions, or for damages resulting from the use of the information contained in this document or the use of programs and source code that can go
with it. Under no circumstances can the publisher and the author be held responsible for any loss of profits or any other commercial prejudice caused
or alleged to have been caused directly or indirectly by this document.
Product information
Product design and specifications are subject to change at any time and ` Qeedji` reserves the right to modify them without notice. This includes the
hardware, the embedded software and this manual, which should be considered as a general guide to the product. The accessories supplied with the
product may differ slightly from those described in this manual, depending on the developments of the various suppliers.
Precautions for use
Please read and heed the following warnings before turning on the power: - installation and maintenance must be carried out by professionals. - do
not use the device near water. - do not place anything on top of the device, including liquids (beverages) or fl ammable materials (fabrics, paper). - do
not expose the device to direct sunlight, near a heat source, or in a place susceptible to dust, vibration or shock.
Warranty clauses
The ` Qeedji` device is guaranteed against material and manufacturing defects for a certain duration. Check the device warranty duration value at the
end of the document. These warranty conditions do not apply if the failure is the result of improper use of the device, inappropriate maintenance,
unauthorized modification, operation in an unspecified environment (see operating precautions at the beginning of the manual) or if the device has
been damaged by shock or fall, incorrect operation, improper connection, lightning, insufficient protection against heat, humidity or frost.
WEEE Directive
This symbol means that your appliance at the end of its service life must not be disposed of with household waste, but must be taken to a collection
point for waste electrical and electronic equipment or returned to your dealer. Your action will protect the environment. In this context, a collection
and recycling system has been set up by the European Union
3
1.1
1.2
1.2.1
1.2.2
1.2.3
1.2.4
1.3
1.4
2.1
3.1
3.1.1
3.1.2
3.1.3
3.1.4
3.1.5
3.1.6
3.1.7
3.1.8
3.1.9
3.1.10
3.1.11
3.1.12
3.1.13
3.1.14
3.1.15
3.1.16
3.1.17
3.1.18
3.1.19
3.1.20
3.1.21
4.1
5.1
5.2
6.1
7.1
7.2
7.3
Table of contents
Part I : Description and installation
Introduction
Getting started with the device
Device fixture
Device dimensions
Labelling
Device start-up step
LEDs behaviour
Connectors pin-out
Part II : Applicative user interface
Applicative user interface
Part III : Administration console user interface
Administration console user interface
Configuration > Administrator
Configuration > LAN
Configuration > WLAN
Configuration > SLATEs pairing
Configuration > Push buttons pairing
Configuration > Sensors pairing
Configuration > Busy lights pairing
Configuration > App
Configuration > Servers
Configuration > License
Configuration > Date and time
Configuration > Regionality
Configuration > Tasks
Configuration > Variables
Maintenance > Middleware
Maintenance > Logs
Maintenance > Preferences
Maintenance > Tools
Information > Device
Information > Network
Information > WPAN devices
Part IV : Configuration by script
Configuration by script
Part V : Technical information
Technical specifications
Conformities
Part V I : Contacts
Contacts
Part V II : Appendix
Appendix: Qeedji PowerPoint publisher for SLATE
Appendix: Device status (status.xml)
Appendix: Img2slate tool
4
Part I Description and installation
5
1.1Introduction
This manual explains how to install and configure your SMH300 device.
Recommendations and warnings
This device is designed to be used indoor.
This device is intended to work with the power supply unit. This power supply unit must be connected to a mains socket conforming to standard NF C
15-100. If the AC power cable is damaged, it must be replaced. It is possible to order a power supply unit replacement by sending a request to the
email address sales@qeedji.tech.
This device is a Class A device. In a residential environment, this device may cause radio interference. In this case, the user is asked to take
appropriate measures.
When powering the device from a PoE source, this PoE source must be " Limited Power Source" as defined in EN60950-1: 2006.
The Bluetooth system operates in the 2.4 GHz ISM¹ frequency bands, the operation of which does not require a licence due to the low transmission
power and the low risk of interference. This frequency band is between 2402 and 2 480 MHz.
¹ Industrial, Scientific and Medical.
Content of the package
Items Description Q uantity
Device SMH300 device with Gekkota embedded. 1
Power supply unit 12 V power supply unit with cable of 1.2 m. 1
Labels One on the cardboard packaging and another one at the back of the product.
Additional label can be present in case build-in options. 2
7
1.2.1Device fix ture
The bottom of the SMH300 if often fixed at 220 cm (or 86.61 " ) far from the fl oor, oriented in the right sense, meaning cable output oriented towards
the ceiling.
8
1.2.2Device dimensions
9
1.2.3Labelling
Product label
The model of the device, the power supply characteristics, the serial number (PSN) and the MAC address are written on a label stuck on the case.
☛ The Q R code on the product label is corresponding to the product identification U RL, for example:
i.q eedji.tech?model= SM H 300& sn= 0092 0-00011& mac.lan1= 00-1C -E6-02 -43-C F .
Packingbox label
This is the label stuck also on the packingbox. It is showing information on:
the device model,
the serial number (PSN).
Some additional labels may be present in case of built-in options.
☛ The serial number of the device could be requested in case of technical support.
10
1.2.4Device start-up step
Step 1 (T0 = 0 s)
Device start-up initialisation
Step 2 (T ~ 9 s)
Device start-up finalisation
This phase duration is depending on
some variable values (like NTP),
some network access duration or
some data checking (check-disk)
Step 3 (T ~ 35s)
Nominal mode
During this step, the device has to
play the App content.
* After firmware upgrade occurred,
in case valid DNS & inactivated
NTP server, it takes ~ 4min30 s.
Altri manuali per SMH300
2
Indice
Altri manuali Qeedji Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
