Qlogic SANbox 3810 Manuale utente

[Quick Start Guide ]

QUICK START GUIDE

FIBRE CHANNEL SWITCH INSTALLATION

SANbox 3810

for Windows®Operating Systems

Quick Start Guide

Installation Instructions

Congratulations on your purchase of the SANbox®3810 Fibre Channel Switch. This guide describes the steps to install and

activate your new switch using a Windows®workstation. For advanced options and instructions (including Solaris®, Linux®,

and Mac OS X®installations), refer to the SANbox 3810 Fibre Channel Switch Installation Guide, which is available at

www.qlogic.com.

NOTE: Do not apply power to the switch until instructed in Step 4.

Step 1. Verify the Package Contents

The SANbox 3810 Fibre Channel Switch is shipped with the following items:

1 SANbox 3810 Fibre Channel Switch

1 AC Power cord

4 Rubber feet

8 SFP optical transceivers (optional)

NOTE: Some models include SFPs, or SFPs can be ordered separately. If you ordered SFPs separately, they will arrive in

a different package.

Step 2. Mount the Switch

❑For a surface mount, attach the rubber feet to the locations on the bottom of the switch. For a rack mount, install the

SANbox 3000/5000 series rail kit and the switch in a standard 19" rack as described in the SANbox 3000/5000 Series

Fibre Channel Switch Rack Mounting Guide.

Step 3. Install Transceivers

An SFP transceiver is required for each SFP port that will be connected to a device. The SANbox 3810 switch SFP ports support

2-Gbps, 4-Gbps, and 8-Gbps transmission.

❑To install an SFP transceiver, insert the transceiver into the switch port and gently press until it snaps in place. The

transceiver will fit only one way. If the transceiver does not install under gentle pressure, flip it over and try again.

Step 4. Apply Power to the Switch

❑Attach the AC power cord to the switch and wall outlet or

power strip. Verify that the Input Power LED is illuminated.

❑The switch runs its self tests and begins normal operation

– this may take a few minutes. Verify that the Heartbeat LED

is blinking (once per second) and the System Fault LED is

NOT illuminated.

INPUT POWER

LED

HEARTBEAT

LED

SYSTEM

FAULT LED

Step 5. Verify Workstation Requirements

❑Verify that your workstation can support the QuickTools™ application with the following minimum requirements:

❑Windows®2003 and XP SP1/SP2

❑512 MB memory minimum; 1 GB recommended

❑1 GHz processor

❑Video card with 256 colors

❑RJ-45 Ethernet port

❑Internet Browser: Microsoft®Internet Explorer®6.0 and later, Netscape Navigator®6.0 and later, Firefox®1.5 and

later, or Mozilla™ 1.5

❑The default IP address of a new switch is 10.0.0.1. Ensure that your workstation is configured to communicate with the

10.0.0 subnet.

Step 6. Connect the Workstation to the Switch

❑Connect the workstation to the switch using an Ethernet crossover cable, switch, or hub. If you are using a Windows

workstation, you must have a live Ethernet connection when the workstation powers up.

Step 7. Log In to the Switch

You can log in to and manage the switch using the command line interface or the QuickTools web applet. This guide will

describe the use of QuickTools.

❑Open an Internet browser and enter the default IP address 10.0.0.1 to start the QuickTools web applet.

❑Log in to the switch using the default user name (admin) and password (password).

Step 8. Run the Configuration Wizard

❑Obtain the IP address and subnet mask from your network administrator.

❑Open the QuickTools Wizards menu and select Configuration Wizard. Follow the instructions to set network parameters

and the password. The default user name is admin; the default password is password. Changing the IP address will

terminate the QuickTools session.

❑Open an Internet browser and start a new QuickTools session. Enter the new IP address to log in to switch.

Step 9. Connect Devices

❑Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port auto-negotiates

the proper port type with the connected device.

Congratulations

You have successfully installed your QLogic SANbox 3810 Switch

*59267-00 B*

QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656

949.389.6000 www.qlogic.com

59267-00 B

of QLogic Corporation. Microsoft , Windows, and Internet Explorer are registered trademarks of the Microsoft

Corporation. MacOS X is a registered trademark of Apple Computer, Inc. Linux is a registered trademark of Linus Torvalds.

Mozilla and Firefox are trademarks or registered trademarks of the Mozilla Foundation. Netscape Navigator is a registered

trademarks of Netscape Communications Corporation. Java and Solaris are registered trademarks of Sun Microsystems,

Inc.. All other brands and product names are trademarks or registered trademarks of their respective owners. Information

supplied by QLogic is believed to be accurate and reliable. QLogic Corporation assumes no responsibility for any errors

in this brochure. QLogic Corporation reserves the right, without notice, to makes changes in product design or

specifications.

Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration

for assistance. QLogic Technical Support can be reached by the following methods:

Web: http://support.qlogic.com

E-mail: [email protected]

The QLogic knowledge database contains troubleshooting information for the QLogic HBAs. Access the data base

from the QLogic Support Web page, http://support.qlogic.com. Use the Support Center search engine to look for

specific troubleshooting information.

Altri manuali per SANbox 3810

Indice

Altri manuali Qlogic Interruttore

Qlogic

Qlogic SANbox 5800V Series Manuale utente

Qlogic

Qlogic SilverStorm 9024 Manuale utente

Qlogic

Qlogic SANbox 3050 Manuale utente

Qlogic

Qlogic SANbox 5200 Series Manuale

Qlogic

Qlogic QLogic 12000 Series Manuale utente

Qlogic

Qlogic SANbox 5600 Series Manuale utente

Qlogic

Qlogic HyperStack 9000 Series Manuale utente

Qlogic

Qlogic SANbox 1400 Series Manuale utente

Qlogic

Qlogic SANbox 1400 Series Manuale utente

Qlogic

Qlogic SilverStorm 9024 Manuale

Qlogic

Qlogic SANbox 5000 Series Manuale utente

Qlogic

Qlogic SilverStorm 9000 Manuale

Qlogic

Qlogic SANbox 5802V Manuale utente

Qlogic

Qlogic SilverStorm 9020 Manuale utente

Qlogic

Qlogic SilverStorm 9000 Manuale utente

Qlogic

Qlogic SANbox 5800V Series Manuale utente

Qlogic

Qlogic SANbox 5800V Series Manuale utente

Qlogic

Qlogic SilverStorm 9040 Manuale utente

Qlogic

Qlogic SANbox 5800V Series Manuale utente

Qlogic

Qlogic SANbox 5000 Series Manuale utente

Qlogic

Qlogic SANbox2 SANbox2-64 Manuale

Qlogic

Qlogic SANbox 5802V Manuale utente

Qlogic

Qlogic SANbox 5602 Manuale

Qlogic

Qlogic SANbox 5600 Series Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente