QSP LM-200 Manuale utente
Phone (888) 473-5378
Local Phone (314) 699-9613
Fax: (314) 699-9617
11515 Adie Rd. Maryland Heights MO 63042
Website: http://qsponline.com
_____________________________________________________________________________
LM-200 Warranty
The LM-200 has been thoroughly tested and is guaranteed for a period of 12 months from the date of
delivery. Under the terms of this guarantee all components which are proven defective within the
warranty period will be repaired or replaced free of charge. Our technical assistance service is the
sole authority in determining whether or not defects come under the coverage of the guarantee. The
guarantee excludes all responsibility on the part of the Quality Stainless Products for direct or
indirect loss or damage to persons or things deriving from incorrect operation or servicing of the
product. The guarantee is limited to defects in materials, workmanship and assembly, and excludes
all components subject to normal wear. Furthermore, the guarantee excludes return shipping of
defective part to QSP. We will however ship the replacement part by standard ground service at no
charge.
Parts Department 888-473-5378
TYPE: Tire and Wheel lift
MODEL: LM-200
Serial Number:
______________________________________
_________________________________________________________________________________
OPERATION INSTRUCTIONS
Removing the Tire and Wheel Assembly from a vehicle using The LM-200
1. Attach air to LM-200
2. Position LM-200 under tire and wheel on the vehicle and raise lifting fork by pressing the
control lever upward. The control valve is variable speed. The further away from center the
lever is moved, the faster the lifting fork will move.
3. Once the rollers have made contact with the bottom of the tire, release the control lever.
4. Remove lugs & pull the top of the tire toward you and disengage wheel from the vehicle.
5. With the tire on the rollers back the lift away from the vehicle and lower the lifting fork.
6. With the tire & wheel assembly resting on the ground, roll the LM-200 away from assembly.
It is not necessary to lift the tire & wheel assembly off of the LM-200.
Installing the Tire and Wheel Assembly on a vehicle using the LM-200
1. With the tire & wheel assembly on the ground, position the LM-200 so that the forks are
beneath the assembly.
2. Press up on the control lever to raise the lifting fork up to the proper installation height.
3. Rotate the tire and wheel on the rollers to align lug studs to the wheel.
4. Slowly raise or lower to exact position and push the top of the tire and wheel assembly
forward to engage the stud and lug nut holes.
5. Install lug nuts and lower lifting fork.
6. Move LM-200 from beneath vehicle before lowering lift to avoid damaging product.
Supply air 70-120psi at 20-30cfm
Please retain this document for reference when calling Technical Assistance.
34 5
16
"
871.5mm
31 3
16
"
792.5mm
61 1
8
"
1551.9mm
14 11
16
"
372.5mm
30 1
2
"
774.3mm
LIFTING CAPACITY: 200LBS
LM-200 INSTALLATION &
ASSEMBLY INSTRUCTION
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
QSP. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF QSP IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
2
ITEM
NO.
PART NUMBER
DESCRIPTION
QTY.
1
LM-200-160
COLUMN WELDED ASSY
1
2
LM-200-174
TOOL TRAY
1
3
LM-200-173
REAR COVER
1
4
LM-200-172
CONTROL BOX COVER
1
5
LM-200-167
COVER RH
1
6
LM-200-166
COVER LH
1
7
LM-200-430
MAST SUPT WELDED
1
8
LM-200-714
CASTER SUPPORT RH
1
9
LM-200-715
CASTER SUPPORT LH
1
10
LM-200-930
CASTER 5" DIA WHEEL
2
11
LM-200-931
CASTER 3" DIA WHEEL
2
12
LM-200-900
AIR CYLINDER
1
13
LM-350-119
SPACER
2
14
LM-200-419
SPACER-TROLLEY
1
15
8000-8
GRIP
2
16
LM-200-410
WHEEL FORK OFF SET
1
17
LM-200-415
ROLLER SUPPORT
1
18
LM-200-R-152
ROLLER
1
19
EG16
ROLLER-TIRE
2
20
LM-200-901
AIR VALVE
1
21
F-1/4 X 1/4NPT L
.25 TUBE X .25NPT ELBOW
2
22
F-3/8 X 1/4NPT L
90 DEGREE CYLINDER ELBOW 3/8T X 1/4 MNPT
2
23 1345
1/4 NPT-3/4-16 THD
1
24
108-60
CHECK VALVE 1/4 NPT
1
25 1347
AIR LINE TEE 1/4 NPT
1
26 1030
QUICK DISCONNECT 1/4 NPT
1
27
F-1/4NPTX3/8T FCL
FLOW CONTROL ELL 3/8 NPT
2
28
LM-200-708
PULLEY ASSY WELDMENT
1
29
LM-200-210
CABLE ANCHOR
2
30
LM-200-606
CABLE PULLEY WHEEL 3.5"
1
31
LM-200-703
GUIDE WHEEL BUSHING
2
32
LM-200-706
GUIDE WHEEL
2
33
LM-200-407
ROLLER-TROLLEY
6
34
LM-200-401
PLATE-FRONT
1
35
LM-200-437
TROLLEY WELDMENT
1
36
T-3/8 PU BLACK TUBE
3/8 BLACK POLYURETHANE TUBE
6
37
LM-200-10
LIFT MATE DECAL KIT
1
38
P-LM-BOX
60-3/16 X 19 X 6-3/4 FTC TOP & BOTTOM
1
39
P-TM-BOX
26-1/4 X 25-15/16 X 8-3/8 RSC 44 ECT
1
40
P-16X12X4
16 X 12 X 4-5/8 RSC ECT32 KRAFT
1
41
H-LM-HDWR
LM-200 HARDWARE KIT
1
42
LM-200-927
CABLE ASSY
1
43
137-71
YELLOW COIL HOSE 4 1/2 COIL
1
44
T-1/4 PU TUBE-FLEX
1/4 BLACK POLYURETHANE AIR LINE
0.75
LM-200 INSTALLATION &
ASSEMBLY INSTRUCTION
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
QSP. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF QSP IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
3
C
D
231
515
12
22
11
9
10
7
34
14
10
8
11
DETAIL D
SCALE 1 : 12
22
29
12
DETAIL C
SCALE 1 : 12
4
27
27
26
23
24
25
21
20
19
18
17
16
CABLE ASSEMBLY
LM-200-927
NOT DEPICTED
ON PRINT
LM-200 INSTALLATION &
ASSEMBLY INSTRUCTION
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
QSP. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF QSP IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
4
ATTACH THE MAST TO THE
1.
MAST SUPPORT USING HARDWARE NOTED.
3/8"-16 X 1-1/4" LG
BOLT, WASHER, NYLOCK
NUT. 4 PLACES.
M10 SOCKET
HD CAP SCREWS
2 PLACES
LEFT HAND
CASTER SUPPORT
SHOWN
MAST SUPPORT
AIR CYLINDER
ATTACH CASTER SUPPORTS RH & LH
1.
TO MAST SUPPORT USING HARDWARE NOTED.
CASTER SUPPORT
LH SHOWN.
3/8"-16 X 1-1/4" LG BOLTS
WASHER, AND NYLOCK NUTS.
MAST SUPPORT
STEP #2 MAST INSTALLATION
STEP #1 CASTER INSTALLATION.
LM-200 INSTALLATION &
ASSEMBLY INSTRUCTION
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
QSP. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF QSP IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
5
WHEEL FORK
ASSEMBLY
ROLLER
SUPPORT
ROLLER
MAST
3/8"-16 X 3/4" LG
BOLT, WASHER
LOCK WASHER
2 PLACES
STEP #3 FORK INSTALLATION
ATTACH WHEEL FORK ASSEMBLY
WITH HARDWARE NOTED. IMPROPER
LOCATION OF HARDWARE CAN CAUSE
INTERFERENCE OF BOLT WITH MAST.
3/8"-16 X 7/8" LG
BOLT, WASHER
LOCK WASHER
2 PLACES
TOOL TRAY
RH COVER
REAR COVER
1/4"-20 X 5/8" LG
BOLT, WASHER
4 PLACES
CONTROL BOX
STEP #4 TOOL TRAY INSTALLATION.
LM-200 INSTALLATION &
ASSEMBLY INSTRUCTION
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
QSP. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF QSP IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
6
AIR CONTROL BOX
AIR VALVE TOGGLE
CONTROL
SHOP AIR
CONNECTION
REAR COVER
COIL HOSE FOR
PNEUMATIC TOOL
(NOT SHOWN)
FLOW CONTROL
VALVE
2 PLACES
STEP #5 AIR LINE CONNECTION
NOTE:
THE FLOW CONTROL VALVES GOVERN THE RATE AT WHICH
THE WHEEL FORK RAISES AND LOWERS. THESE CONTROLS
ARE PRESET AT THE FACTORY, BUT CAN BE ADJUSTED BY THE END
USER IF THE DESIRED SPEED NEEDS TO BE INCREASED OR DECREASED.
SUGGESTED MAINTENANCE:
THE LM-200 LIFT OPERATES BEST WITH SHOP AIR THAT IS CLEAN AND DRY.
1.
PERIODICALLY CHECK THE TIGHTNESS OF ALL FASTENERS.
2.
PERIODICALLY CHECK THE CONDITION OF LIFTING CABLE. IF ANY FRAYED STRANDS
3.
ARE NOTICED REPLACE CABLE.
LM-200 INSTALLATION &
ASSEMBLY INSTRUCTION
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
QSP. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF QSP IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
7
Indice
Altri manuali QSP Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
