quadient IS-280 Manuale utente
Franking Machine
Base Swap Guide
IS-280
| Page 2 | TOC | Jun-16-2015 01:33 |
Swap mailing system base
unit
1
Base swap process
Please read the following information carefully to complete the
installation of your new base unit.
1- Preparing the Mailing System
How to Prepare a New Base for Swap
If it is possible to use the MENU button on the faulty base please remove your ink
cartridge using the following path.
This cartridge will be refitted to the new base during the installation
process.
1. Press the MENU button and select Ink Cartridge.Then Ink Cartridge Replacement.
2. Lower the front cover and pull the left side of the blue latch to the open position.
Remove the cartridge.
1
| Page 1 | Jun-16-2015 01:33 | Swap mailing system base unit
1
3. Remove the power cable from the rear of the base
4. Remove other cables from the rear of the base
5. Lift the weight platform off of the base and remove the cable. Store the platform in a
safe place, it will be reconnected at the end of the process.
2
| Page 2 | Jun-16-2015 01:33 | Swap mailing system base unit
1
6. Carefully place the base unit onto its back.Open the cover as shown to locate the
meter
7. Remove the meter from the old base unit. Keep the meter in a safe place.The meter
will be refitted during the swap process.
Close the meter cover and place the faulty base to one side.
8. Remove the new base unit from the box.Open the front cover as shown in the diagram.
Remove the packing material.Then close the front cover.
Do not fit the ink cartridge at this stage.
1
3
| Page 3 | Jun-16-2015 01:33 | Swap mailing system base unit
9. Place the new unit onto its back to access the meter cover. Open the cover and refit
the meter as shown.If the cover does not close properly, the meter is not fitted
correctly.
10. Turn the unit back to the upright position. Refit the weight platform by connecting the
plug as shown and placing the platform back on top of the base unit.
11. If you use LAN :
Reconnect the LAN to the port as shown in the following diagram.
Check that the LAN cable is also connected to the correct socket on the wall.
4
| Page 4 | Jun-16-2015 01:33 | Swap mailing system base unit
1
12. If you use PC Meter Link :
Reconnect the PC Meter Link to the port as shown in the following diagram.
To Run PC Meter Link application, please see more details in the
Installation Guide
Plug to the USB cable square end to your system
Plug the USB cable flat end to your computer
1
5
| Page 5 | Jun-16-2015 01:33 | Swap mailing system base unit
13. Connect the power adapter to the back of the new base as shown and then power
on.
Allow the unit to power up then follow the setup procedure below.
Whenthe unit powersup a messagewith an errorcodemayappear.
This is due to the base Looking for the ink cartridge.To skip this
screen Press:
If you useTelephone modem :
Reconnect the Telephone modem to the USB port as shown in the diagram.
Check that theTelephone cable is also connected to the correct socket on the wall.
6
| Page 6 | Jun-16-2015 01:33 | Swap mailing system base unit
1
2- Setting up Connections
In this section you are required to select the connection type.The three options offered are
MODEM, LAN or PC Meter Link.
• If Modem is selected a connection via an analogue telephone line is required. See
How to Use Modem connection on page 8.
• If the LAN option is selected the unit will test the connection for any security/proxy
settings.If a proxy server is detected the network administrator will be required to
obtain the settings for connection to the Neopost server.See How to Use LAN
connection on page 9.
•If the PC Meter Link is selected a connection via a USB cable to PC is required.See
How to Use PC Meter Link Connection on page 11.
Setting up connection with an Analog Modem
1
7
| Page 7 | Jun-16-2015 01:33 | Swap mailing system base unit
Altri manuali per IS-280
8
Indice
Altri manuali quadient Attrezzature postali
quadient
quadient IS-240 Manuale utente
quadient
quadient IN-360 Series Manuale utente
quadient
quadient IS-420 Manuale utente
quadient
quadient IJ-15K Manuale utente
quadient
quadient IS-6000 Manuale utente
quadient
quadient iX-3 Series Manuale utente
quadient
quadient IS-330 Manuale utente
quadient
quadient IS-480 Manuale utente
quadient
quadient IS-420 Manuale utente
quadient
quadient IS-240 Manuale utente
quadient
quadient iX-5 Series Manuale utente
quadient
quadient IN-360 Series Manuale elenco delle parti
quadient
quadient IS-280 Manuale utente
quadient
quadient HD-MB50D Manuale utente
quadient
quadient iX-5 Series Manuale utente
quadient
quadient 200 Series Manuale utente
quadient
quadient IJ-15K Manuale utente
quadient
quadient IN-360 Series Manuale utente
quadient
quadient IS-350 Manuale utente
quadient
quadient IS-280 Manuale utente
