Quantifi Photonics IQTX EPIQ Manuale utente
quantifiphotonics.com
IQTX EPIQ USER GUIDE
Quick Start
With the instrument powered
OFF, connect the power cord.
Turn the isolation switch ON.
Turn the instrument ON.
Connect the instrument:
to the client computer using a USB cable,
or
to your network,
or
client computer
via an Ethernet cable.
Note down the IP address as displayed
on the front LCD screen. With both, USB
and Ethernet cable connected, the IP
address displayed will alternate between
the USB and Ethernet IP address.
Note: Aer powering the IQTX on, please
wait at least 1 minute before aempting to
communicate with the IQTX. This will allow the
IQTX enough time to finish boot procedures and
initialize the communication server.
Important: You must use the external power
supply that has been supplied by Quantifi
Photonics with the unit. Any aempt to use
a dierent external power supply may cause
product damage and will void your warranty.
Set up the computer you will use
to connect with the instrument by
installing the Cohesion Operator
soware package. The package is
included on the USB drive that we
provide with your instrument.
Insert the USB drive on the computer.
Alternatively, you can download the
Cohesion Operator soware package
from quantifiphotonics.com.
Double-click CohesionOperator-
<version>.exe and follow the prompts.
The installation wizard will install
required drivers, applications, and
desktop icons on the computer.
Step 2.
Installing the latest soware
on the client computer.
Step 1.
Installing the
IQTXinstrument.
via USB
via Ethernet
Cohesion Operator
You can control all available Quantifi
Photonics instruments through
CohesionUI, a web-based graphical
user interface, or with SCPI commands.
To communicate with an instrument:
Open the Cohesion Operator application
on the client computer, for example by
double-clicking the desktop icon.
Select the instrument – the IP address
of the instrument is displayed on
the LCD screen on the back of the
instrument (e.g. 10.10.10.89).
Click Connect to validate the IP address
and collect instrument information:
Click Open SCPI Command Console
to work with SCPI commands.
Click Open CohesionUI to work with
the graphical user interface.
Important: If another Quantifi Photonics
instrument is already connected to the client
computer via USB, consult the user manual on
configuring the Ethernet / USB IP address for
multi-instrument control.
Step 3.
Communicating with
the IQTXinstrument.
The IQTX has a touch-screen
Graphical User Interface (GUI) which
provides the user local access to the
web server application.
The user can control the installed
lasers and modulators configuration,
adjust the seings of the display, and
edit the Network seings.
To access the seings menu, click
on the SETTINGS icon buon on
the right-hand boom corner of
the LCD screen.
Step 4.
Operating the IQTX
from the LCD interface.
quantifiphotonics.com
Connect the internal laser output to
a modulator input using the short
PM patch cord provided with the
instrument and turn the laser on. Once
the laser has stabilized, click FORCE
CALIBRATE in CohesionUI to perform
the DC bias scan and start the
Automatic Bias Control (ABC).
Step 5.
Initializing the
ABC ofIQTX.
Once the ABC has locked, connect the
RF signal generator to IQTX and turn
the RF driving signal on. The peak-to-
peak voltage amplitude of the driving
signal should be set to below 1.8 x
Vpi for QPSK signals, and around 1.2
x Vpi for multi-level formats such as
16 QAM. Typically, the driving signal
amplitude should be around 200 mV
to 300 mV. Do not exceed 500 mV as
this will damage the instrument.
For detailed operating information,
refer to the IQTX User Manual
included on the USB media drive.
Step 6.
Applying the
RFsignal.
Test.
Measure.
Solve.
Quantifi Photonics is transforming the world of photonics test
and measurement. Our portfolio of optical and electrical test
instruments is rapidly expanding to meet the needs of engineers
and scientists around the globe. From enabling ground-breaking
experiments to driving highly ecient production testing, you’ll
find us working with customers to solve complex problems with
innovative solutions.
IQTX
USER GUIDE 1.01
© 2021 Quantifi Photonics. All rights reserved. No part of this publication may be reproduced, adapted, or translated in any form or
by any means without the prior permission from Quantifi Photonics. All specifications are subject to change without notice. Please
contact Quantifi Photonics for the latest information.
To find out more, get in touch with us today.
General Enquiries sales@quantifiphotonics.com
Technical Support support@quantifiphotonics.com
Phone +64 9 478 4849
North America +1-800-803-8872
quantifiphotonics.com
Altri manuali Quantifi Photonics Trasmettitore
