Quantum DXi6701 Manuale dell'operatore
READ THIS FIRST
THIS DOCUMENT PROVIDES
INSTALLATION INSTRUCTIONS FOR
YOUR DXi6701 OR DXi6702 SYSTEM.
IMPORTANT: READ THIS ENTIRE
INSTALLATION DOCUMENT BEFORE
YOU START TO UNPACK OR INSTALL
YOUR DXi6701 OR DXi6702 SYSTEM.
www.quantum.com
DXi6701/DXi6702
Contents
DXi6701 and DXi6702 Configurations... 2
Choosing a Location .............................. 3
Installation Requirements.................. 3
Rack Space Requirements .................. 3
Environmental Conditions ................. 3
Preparing for the Installation ................ 4
Necessary Tools .................................. 4
Taking ESD Precautions ...................... 4
Unpacking the DXi6701/DXi6702........... 5
DXi6701/DXi6702 Node Packaging .... 5
DXi6701/DXi6702 Expansion Module
Packaging........................................... 8
Installing the DXi6701 or DXi6702
System.................................................. 10
Locating the Mounting Position ...... 10
Installing the DXi6701 and DXi6702
Node................................................. 11
Installing the DXi6701 and DXi6702
Expansion Module ........................... 16
Cabling the DXi6701/DXi6702 ......... 20
Initial Configuration............................. 25
Accessing the DXi6701/DXi6702
Remote Management Interface ....... 25
Completing the Getting Started
Wizard .............................................. 28
Connecting the Ethernet Cables ...... 36
Creating a Typical Backup
Configuration................................... 38
DXi6701 and DXi6702
Installation and
Configuration Guide
This guide provides basic installation and configuration instructions for the
DXi6701 and DXi6702 systems (see Figure 1). For more information, see
the
Quantum DXi6000 User’s Guide
(PN 6-67199).
Note: Make sure to take the online training for the DXi6701 and
DXi6702 in order to make the best use of your product. The online
training is available at www.quantum.com/ServiceandSupport/
StorageCareLearning/Index.aspx
Figure 1 DXi6701/DXi6702 Components
Note: This
Installation and Configuration Guide
is for DXi6701 and
DXi6702 with DXi 2.3 Software.
DXi6701/DXi6702 Node
DXi6701/DXi6702 Expansion Module
2DXi6701 and DXi6702 Configurations
DXi6701/DXi6702 Installation and Configuration Guide
DXi6701 and DXi6702 Configurations
The DXi6701 and DXi6702 are available in the following configurations (see Table 1):
Table 1 DXi6701 and DXi6702
Configurations
Configuration Usable Capacity
Expansion
Modules with
1 TB Drive (Adds
8 TB Usable
Capacity)**
Expansion
Modules with
2 TB Drive (Adds
16 TB Usable
Capacity)**
Rack Space
Required
DXi6701
•1Node
• 2 or 4 RAID controller cards*
• 6 x 1 GbE Ethernet ports
• 4 x 8 Gb Fibre Channel ports
DXi6702
•1Node
• 2 or 4 RAID controller cards*
• 2 x 1 GbE Ethernet ports
• 2 x 10 GbE Ethernet ports (optical
or Twinax)
• 4 x 8 Gb Fibre Channel ports
8 TB – – 3U for node
2U for each
expansion
module
16 TB 1 –
24 TB 2 –
24 TB – 1
32 TB 3 –
32 TB 1 1
40 TB 4 –
40 TB – 2
48 TB 5 –
48 TB 1 2
56 TB 6 –
56 TB – 3
64 TB 7 –
64 TB 1 3
72 TB 8 –
72 TB – 4
80 TB 9 –
80 TB 1 4
* DXi6701 and DXi6702 configurations with 0 or 1 expansion modules include 2 RAID controller cards. All other configurations
include 4 RAID controller cards.
** Any combination of expansion modules (with 1 TB drives or 2 TB drives) may be ordered or used for field capacity upgrades as
long as the total capacity does not exceed 80 TB. The table does not list all possible combinations.
Choosing a Location 3
DXi6701/DXi6702
Choosing a Location
Quantum recommends installing the DXi6701/DXi6702 system in a controlled or
restricted area to prevent access by untrained personnel. In addition, Quantum
recommends that system installation be performed only by qualified IT personnel.
When choosing an installation site for the DXi6701/DXi6702 system, consider the
following requirements:
•Installation Requirements on page 3
•Rack Space Requirements on page 3
•Environmental Conditions on page 3
Installation
Requirements
Review the
DXi6701 and DXi6702 Site Planning Guide
(PN 6-67200) to ensure that your
site meets the installation requirements for the DXi6701/DXi6702. You can obtain
DXi6701 and DXi6702 product documentation at: http://www.quantum.com/
dxi6700docs
Rack Space
Requirements
Tab l e 2 contains the rack requirements for the DXi6701/DXi6702 components.
Table 2 Rack Requirements
Environmental
Conditions
The installation site must have the following environmental conditions:
• Humidity: 20% to 80% (non-condensing)
• Temperature: 50° to 95°F (10° to 35°C)
• Altitude: –100 to 10,000 ft. (–30 to 3048 m)
Model 6701/6702 Node Expansion Module
Height 3U, 5.2 in. (13.2 cm) 2U, 3.5in (8.9 cm)
Width (side to side) 17.2 in. (43.7 cm) 17.2 in. (43.7 cm)
Depth (front to
back)*
26.5 in. (67.3 cm) 26.5 in. (67.3 cm)
Weight (stand alone) 72 lbs. (32.7 kg) 52 lbs. (23.6 kg)
Air Clearance Open 4 in. (10.2 cm) behind unit for proper air flow
* Without the round-hole to square-hole adapter, the depth of the node or expansion
module is 25.5 in. (64.8 cm).
4Preparing for the Installation
DXi6701/DXi6702 Installation and Configuration Guide
These environmental conditions apply when the DXi6701/DXi6702 system is in
operation.
Note: For additional specifications, refer to the
DXi6000 User’s Guide
(PN 6-67199).
Preparing for the Installation
Before you begin the installation procedure in this section, make the following
preparations as described in this section:
•Necessary Tools on page 4
•Taking ESD Precautions on page 4
Necessary Tools Provide the following tools for unpacking and installing the DXi6701/DXi6702 system:
• #2 PHILLIPS screwdriver
• Notebook PC (for setting up initial system configuration)
Taking ESD Precautions Some components within the DXi6701/DXi6702 system contain static-sensitive parts. To
avoid damaging these parts while performing installation procedures, always observe
the following precautions:
• Keep the DXi6701/DXi6702 system turned off during all installation procedures.
• Keep static-sensitive parts in their original shipping containers until ready for
installation.
• Do not place static-sensitive parts on a metal surface. Place them inside their
protective shipping bag or on an antistatic mat.
• Wear anti-static wrist bands when unpacking and handling the units, and avoid
touching connectors and other components.
Note: Dry climates and cold-weather heating environments have lower relative
humidity and are more likely to produce static electricity.
Unpacking the DXi6701/DXi6702 5
DXi6701/DXi6702
Unpacking the DXi6701/DXi6702
By following these instructions, you help ensure that the system will continue to be
safeguarded after it arrives at the installation site.
Caution: Do NOT discard the packing materials after the system is unpacked. The
packaging materials must be used if the system is relocated.
WARNING: The DXi6701/DXi6702 node and expansion module weighs 72 lbs.
(32.7 kg) and 52 lbs. (23.6 kg) respectively. A minimum of two people are
required to lift either chassis.
DXi6701/DXi6702 Node
Packaging
The box containing the DXi6701/DXi6702 node contains the following items:
• DXi6701/DXi6702 node
• Rack mount rails
• Bezel shipping bag (contains the front bezel)
• Accessory kit, which includes the following:
• Doc Kit — All models:
• Quantum Products Regulatory Documentation CD
• Registration (Warranty) card
• Terms and Conditions Document
• OST License Certificate
• Base Node Kit — All models:
• Adapter kit, Rapid Rail (1)
• Cable, CAT6, RJ45, Non-Plenum, Blue Solid, 25 ft. (2)
• Conical Spring Washer, M5, Zinc plated (8)
• Screw, M4X6, FH, Phillips (4) (Only 2 screws are required for installation. The
remaining 2 screws are extra.)
• Screw FHPH 10FX.50 SSBK 100° (8)
• Screw, 10–32 X 3/4 in., Black (2)
• C13 to C14 power cord (2)
• North American power cord (2)
•BezelKeys
• Cable Kit QUAD 1GbE NIC — DXi6701:
• Cable, CAT6, RJ45, Non-Plenum, Blue Solid, 25 ft. (4)
6Unpacking the DXi6701/DXi6702
DXi6701/DXi6702 Installation and Configuration Guide
• Cable Kit Dual 10 GbE NIC — DXi6702 Optical:
• Cable, 10 GbE, 10 meter (2)
• Cable Kit Dual 10 GbE NIC — DXi6702 Twinax:
• Cable, 10 GbE, 5 meter (2)
• Cable Kit DUAL FC HBA :
• Cable, 10 GB, 6 meter (2)
• Loose Items:
•Nodebezel
• Installation Guide
• Drive Slot Serial Number Map
Carefully unpack and remove the components from the packing materials (see Figure 1).
Unpacking the DXi6701/DXi6702 7
DXi6701/DXi6702
Figure 1 Unpacking the
DXi6701/DXi6702 Node
DXi6701/DXi6702 Node
Foam
Box
Rack mount rails
Front bezel
Accessory kit
Bezel shipping bag
Foam
8Unpacking the DXi6701/DXi6702
DXi6701/DXi6702 Installation and Configuration Guide
DXi6701/DXi6702
Expansion Module
Packaging
The box containing the DXi6701/DXi6702 expansion module contains the following
items:
• DXi6701/DXi6702 expansion module
• Rack mount rails
• Bezel shipping bag (contains the front bezel)
• Accessory kit, which includes the following:
• Base Expansion Module Kit – All Models:
• Adapter Kit, Rapid Rail (1)
• Screw, M4X6, FH, Phillips (4)
• Screw, 10–32 X 3/4 in., Black (2)
• Conical Spring Washer, M5, Zinc Plated (8)
• Screw FHPH 10FX.50 SSBK 100° (8)
• C13 to C14 power cord (2)
• North American power cord (2)
• SAS interconnect cable
• Storage Capacity License Certificate
• Loose Items:
• Expansion module bezel
• Drive Slot Serial Number Map
Carefully unpack and remove the components from the packing materials (see Figure 2).
Altri manuali per DXi6701
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Quantum Magazzinaggio
Quantum
Quantum Q2000 Manuale utente
Quantum
Quantum ActiveScale X100 Manuale utente
Quantum
Quantum DXi6701 Manuale tecnico
Quantum
Quantum Maxtor Fireball CR Manuale utente
Quantum
Quantum P2000 Series Manuale utente
Quantum
Quantum ACL 4/52 Manuale
Quantum
Quantum DLTtape DLT 7000 Manuale utente
Quantum
Quantum Scalar 50 Manuale utente
Quantum
Quantum DLT-V4 Manuale utente
Quantum
Quantum Scalar i40 Istruzioni operative e di sicurezza
Quantum
Quantum Scalar LTFS Manuale per l'uso e la cura
Quantum
Quantum Scalar LTFS Manuale per l'uso e la cura
Quantum
Quantum StorNext QD7000 Manuale utente
Quantum
Quantum Scalar i40 Istruzioni operative e di sicurezza
Quantum
Quantum Atlas 10K II Manuale utente
Quantum
Quantum StorNext QD6000 Manuale utente
Quantum
Quantum DXi6900 Guida rapida
Quantum
Quantum Superloader 3 Manuale utente
Quantum
Quantum StorNext QS1200 Manuale utente
Quantum
Quantum Superloader 3 Manuale utente
