Quantum Scalar i6 Manuale utente

Indice

Altri manuali Quantum Magazzinaggio

Quantum

Quantum ValueLoader DLT VS160 Manuale utente

Quantum

Quantum Scalar 50 Manuale utente

Quantum

Quantum PX500 Series Manuale utente

Quantum

Quantum Scalar i6000 Manuale tecnico

Quantum

Quantum DX100 Manuale utente

Quantum

Quantum 4000 Enhanced Istruzioni operative

Quantum

Quantum Scalar 10K Manuale di istruzioni

Quantum

Quantum DLT 1 Manuale utente

Quantum

Quantum ATL M1500 Manuale utente

Quantum

Quantum DLTtape DLT 2000 Manuale utente

Quantum

Quantum ValueLoader DLT VS80 Manuale utente

Quantum

Quantum StorNext QM1200 Manuale utente

Quantum

Quantum DLTtape DLT 2000 Manuale utente

Quantum

Quantum DX3000 Manuale utente

Quantum

Quantum QXS-448 Manuale utente

Quantum

Quantum QX Series Manuale utente

Quantum

Quantum DLT-V4 Manuale utente

Quantum

Quantum Travan 20GB Manuale utente

Quantum

Quantum P4000 Series Istruzioni per l'installazione e il funzionamento

Quantum

Quantum Scalar i500 Manuale utente

Quantum

Quantum Scalar i2000 Manuale di istruzioni

Quantum

Quantum DLTtape SDLT 600 Manuale utente

Quantum

Quantum Scalar 1000 Manuale di istruzioni

Quantum

Quantum Scalar i6000 Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente

Scalar i6 QUICK START

The Scalar i6 features simple, cartridge-based media handling with active vault and Extended Data Life

Management (EDLM) partitions that automatically scan media for certain issues. For complete documentation,

including pre-installation requirements, refer to the Scalar i6 Documentation Center:

http://quantum.com/scalari6docs.

Activate your warranty and register your product with Quantum: www.quantum.com/startup

Your system will include a single Control Module, or a Control and at least one Expansion Module (EM).

Installing the Scalar i6

A summary of the steps is below. For details, see:

Install > Single Module Installation or Install > Multi-Module Installation.

For safety information, see Resources > Safety Information.

Step 1 Unpack the library, and remove the top cover and restraints.

Step 2 Multi-module installation only: Remove the robot and

the bottom cover; then install the bottom cover on the

bottom module of the library.

Step 3 Mount the library in the rack. For specifications, see

“Rack” in the Technical Specifications section of the

Site Planning Guide.

Step 4 Multi-module installation only: Add EMs, and install the

robot and the top cover.

Step 5 Install components, and cable the library.

Step 6 Connect to the WebGUI, and install the firmware.

Page 1

Step 7 Log on, and run the Installation Verification Test (IVT).

Expansion Module

Control Module

Local User Interface (LUI) Magazines Magazine Eject Buttons

Configuring the Scalar i6

6-68759-01 Rev A ©2019 Quantum Corporation. All rights reserved.

Page 2

*6-68759-01*

Operating and Maintaining the Scalar i6

At a minimum, you must complete the steps below to get your system up and running.

Step 1 Add licenses. See Operate > User Guide > Licenses.

Step 2 Define I/E slots. See Operate > User Guide > Library > I/E Area.

Step 3 Define cleaning slots. See Operate > User Guide > Library > Library Cleaning Slots.

Step 4 Create a partition. See Operate > User Guide > Partitions.

For information about configuring other parts of the system, such as setting the date and time, registering

the library, and configuring library contact information, see:

Install > Single Module Installation or Install > Multi-Module Installation.

Make sure to learn how coordinates work,

because this will help you locate drives,

slots, and media in your library.

See Operate > Understanding Coordinates.

Now that your system is up and running, use the Status menu to view hardware and library statuses.

Set up email notification for anyone who needs to

know about potential issues and information, such as:

•Media integrity, security, and usage

•Drive cleaning and utilization

•Reports about the system