QuickLabel LF-100 Manuale utente
LF-100/LF-200 Desktop Label
Finishing System
User Guide
Part Number 22834703-EN-E
Revision 1.0
4/2021
QuickLabel, An AstroNova®Division
World Headquarters
600 East Greenwich Ave., West Warwick, RI 02893
Tel: (877) 757-7978 Fax: (401) 822-2430
E-mail: [email protected]
www.QuickLabel.com
Technical Support
Tel: (877) 757-7310
E-mail: support@QuickLabel.com
www.QuickLabel.com/support/
© 2021 AstroNova, Inc. All Rights Reserved
This manual is copyrighted with all rights reserved. No part of this manual may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any
form by any means without written permission of AstroNova.
Trademarks
Adobe®, Photoshop®, and Illustrator® are registered trademarks of Adobe Systems, Inc.
Corel® is a registered trademark of Corel Corporation.
Microsoft® Windows® Vista®, and Windows® are registered trademarks of Microsoft
Corporation.
Important
Please keep the original packaging in case you need to return the material. If we receive the
system in non-original packaging, the warranty will be void.
latest version of the VIRGO software is available on the QuickLabel website.
Obtaining Service
To obtain warranted service, please contact QuickLabel Technical Support through one of the
Factory Sales and Service Centers.
Contact Information
World Headquarters
600 East Greenwich Ave.
West Warwick, RI 02893 USA
Toll-Free: 877-757-7978 | Tel: +1 401-828-4000
quicklabel.com
European Headquarters
Waldstrasse 70
63128 Dietzenbach | Germany
Tel: +49 (0) 6074-31025-00
quicklabel.de
Canada
3505 Rue Isabelle
Suite O
Brossard, QC J4Y 2R2
Tel: +1 800-565-2216
quicklabel.ca
Latin America
Av Insurgentes Sur No 1602, 4º Piso
Suite 467
Col. Credito Constructor
Ciudad de Mexico CDMX 03940
Mexico
Tel: +52 55 1000-9116
quicklabel.com/es
Denmark
Marielundvej 46A, 2.
2730 Herlev
Tel: +45 29 64 00 05
trojanlabel.com
France
Parc Euclide
ZA la Clef de St Pierre
10A Rue Blaise Pascal
78990 Elancourt
Tel: +33 (1) 34 82 09 00
quicklabel.fr
United Kingdom
A5 Westacott Business Centre
Westacott Way, Maidenhead
Berkshire, SL6 3RT
Tel: +44 (0) 1628 668836
quicklabel.co.uk
China
1F, Bldg2#,
458 North Fu Te Road,
Shanghai Waigaoqiao F.T.Z., 200131
Tel: +86 21 5868 2809
quicklabel.cn
LF-100 User Guide 5
Contents
Chapter 1: Installation and Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Install the Cutting Plotter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter 2: Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Load and Operate the Lamination Module . . . . . . . . . . . . . . . . . . . . . . . . 14
Clutch Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Load the Laminated Media Into the Plotter . . . . . . . . . . . . . . . . . . . . . . . . 16
Run the Cut Test and Start a Job. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Load the Matrix Remover Core Holder . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Load the Rewinder Core Holder and Set the Slitter Module . . . . . . . . . . . . . . . 18
Add or Remove a Blade Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Metal Guides Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Remove Unwanted Waste from the Edge of the Roll. . . . . . . . . . . . . . . . . . . 21
Black-Mark Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Cutting File Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Black-Mark Position in the Cutting File and Printed Artwork . . . . . . . . . . . . . . . 23
Black-Mark Position in the Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Cut Blank Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Update Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Restore Plotter Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Reduce Plotter Feeding Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Media Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Tension Arm Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Module Speed Rotation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chapter 3: Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Graphtech Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Replace the Knife. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Replace the Slitter Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Replace the Cutting Mat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Contents
LF-100 User Guide 6
Chapter 4: Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Yellow and Green LED’s Simultaneously on Lamination Control Board . . . . . . . . . 35
Media Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Lamination Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Media Not Aligned Properly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Plotter Error “E01017 Hardware X Position Alarm Power off then on” . . . . . . . . . . 37
Plotter is Not Cutting or Plotter Cutting Through the Material . . . . . . . . . . . . . . 38
Plotter Error “E01019 Hardware Y Position Alarm Power off then on” . . . . . . . . . . 38
Plotter Error “E05004 Hardware Realign Push Rollers Confirm” . . . . . . . . . . . . . 39
Cutting Manager Error “Black-mark not found” . . . . . . . . . . . . . . . . . . . . . . 39
The Media or Lamination roll might be finished, please check it. Proceed
with cutting? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Error: Load the Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Dongle not found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Can’t load sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Error: plotter not found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Last job not found. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Please forward the media to the next black-mark . . . . . . . . . . . . . . . . . . . . 41
Please forward the media to reach a positive Y value shown on the
plotter’s display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Error after opening a .pdf file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
LF-100 User Guide 7
1
Installation and Setup
Install the Cutting Plotter
1. Click on “SetupVirgoCM...” and follow the step-by-step instructions to complete the
installation.
Note: Please DO NOT connect the Virgo USB to your PC before the installation is
complete.
2. Click Next.
Installation and Setup
LF-100 User Guide 8
3. Click Next.
4. Click Next.
Installation and Setup
LF-100 User Guide 9
5. Click Next.
6. In process.
Installation and Setup
LF-100 User Guide 10
7. Click Next.
8. Click Finish.
9. Click OK.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali QuickLabel Stampante
