Racelogic VBOX Touch Manuale utente
VBOX Touch Accel Mode - Quick Start Guide
VBOX Touch features a 10 Hz G SS receiver and a responsive colour touchscreen. The Accel Mode allows you to
perform 4 concurrent acceleration tests using specified values.
Registration
So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and to
offer technical support, please register your VBOX Touch.
Register your unit here.
What’s Included
VBOX Touch (RLVBTOUCH)
Product Code Quantity Description
VBTOUCH-V1 1VBOX Touch 10 Hz Unit Including
Rubber Cover
RLCAB010LE / RLCAB014LE 1
Cigar Plug Power Supply
(RLVBTOUCH, 2 m)
or Unterminated Power Supply
(RLVBTOUCH-M, 2 m)
RLACS313 18 GB SD Ultima Pro UHS-1 Memory
Card
RLACS262 1 G SS Antenna (3 m)
RLACS277 1 Swivel eck Richter Suction Mount
RLACS281 1
Plastic Carry Case for VBOX Touch
(not supplied with RLVBTOUCH-
M)
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
1
VBOX Touch RTK (RLVBTOUCHR)
Product Code Quantity Description
VBTOUCHR-V1 1VBOX Touch RTK 10 Hz Unit
Including Rubber Cover
RLCAB010LE 1Cigar Plug Power Supply
(RLVBTOUCH, 2 m)
RLACS313 18 GB SD Ultima Pro UHS-1 Memory
Card
RLACS308 1 G SS Antenna (3 m)
RLACS277 1 Swivel eck Richter Suction Mount
RLACS281 1 Plastic Carry Case for VBOX Touch
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
2
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
3
Accessories
Product Code Description
RLVBACS004 Brake Pedal Trigger
RLVBACS010 Hand Held Start/Stop Logging Switch
RLCAB001 VBOX PC Serial Cable
Hardware Overview
Left Side
SD Card
VBOX Touch logs data via an SD card. Dependent on the Logging Strategy selected within the General
Settings area, the unit will either log continuously or when movement is detected (default). More information on this is
available here.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
4
Right Side
Antenna
VBOX Touch has an internal patch antenna, meaning that in many circumstances where the unit has a clear view of the
sky without any interference, an additional antenna is not required. However, if you are struggling to maintain a stable
satellite lock, the supplied external antenna (RLACS262) can be connected to the antenna socket. The external antenna
should also be used when conducting a Brake Trigger Test. More information on the external antenna is available
here.
D IN/PPS
The Digital In and PPS port can be used for connection to the VBOX Brake Pedal Trigger to provide brake trigger
deceleration tests. More information on this is available here.
The port can also be used to connect a Hand Held Start/Stop Logging Switch (RLVBACS010) to control the logging of
the unit. More information on this is available here.
CAN/Serial (Top)
The top CA /Serial port can be used to output serial information, allowing you to either connect VBOX Touch to VBOX
Test Suite via an RLCAB001 and conduct live testing, or output lap timing parameters. Serial Output settings
information is available here.
CAN/Serial (Bottom)
The bottom CA /Serial port can be used by VBOX Touch RTK units to receive RTK corrections via an NTRIP Modem
or a Telemetry Radio Module with a Static Base Station. RTK input settings information is available here.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
5
Power
The VBOX Touch unit is either powered by the supplied RLCAB010LE cable (RLVBTOUCH) which is inserted in to a
vehicle's 12 V cigar power socket, or by the RLCAB014LE cable (RLVBTOUCH-M) which is unterminated for making a
bare wire connection to a power supply. More information on this is available here.
Logging
VBOX Touch logs data via an SD card inserted in to the Left Side of the Unit. The unit is supplied with an 8 GB SDHC
card in a FAT32 file format, which is the only file format supported. If you are looking to purchase a new SD card, it is
recommended that any card used has a write speed of above 7 MB/s (4 MB/s absolute minimum) and a speed class of
10 (4 absolute minimum). Racelogic recommend SD cards from quality brands such as Transcend, SanDisk, Kingston
or Lexar to ensure best results.
IMPORTANT – If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into
a FAT32 file system before it will work with a VBOX Touch unit. More information on this can be found here.
Screen Overview
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
6
Setup
1. VBOX Touch has an internal patch antenna, meaning that in many circumstances, where the unit has a clear view
of the sky without any interference, an additional antenna is not required.
However, if required, mount the supplied external G SS antenna in the centre of the roof of the vehicle, away from
roof bars and other antennas. For more information on antenna mounting positions click here.
Note: The external antenna should be used If you are receiving NTRIP RTK corrections with a VBOX Touch RTK
unit.
2. If applicable, connect the external GPS antenna to the VBOX Touch.
3. Connect the Swivel eck Richter Suction Mount (RLACS277) to the rear of the unit and attach to the vehicle
windscreen.
4. Connect the power via the Power socket.
5. Insert the SD card into the Side of the Unit. The SD Card Icon should display as green
as long as the card has free space.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
7
6. When the unit has booted, select the Mode Button
and press ACCEL if it is not already selected.
7. Select which Accel screen you would like to be shown (Primary,Secondary or Best Result) by selecting
the Forward
and Back
arrows on the bottom right of the screen or by swiping the screen left or right.
Primary Secondary Best Results
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
8
8. Select the Settings Button
, then the Accel option and choose the Start and End Parameters of the 4 concurrent tests, by default these are
0–60, 0–100, 0–100–0 and 0–¼ mile.
9. If you would like an audible and visual alert when the Primary test is completed or the target speed is met within a
0-Speed-0 test, enable Alert at End/Target within the Settings.
10. If you would like the tests to start once 1 ft or 0.305 m distance has been covered, enable One Foot Rollout within
the Settings.
Note: Cannot be used in conjunction with Slope Correction.
11. If you would like to apply DB Scanner slope correction method to the tests, enable Slope Correct within the
Settings.
Note: Cannot be used in conjunction with One foot rollout.
12. If you have a VBOX Touch RTK unit and are intending to use RTK corrections, go to RTK Input within the Serial
Port Settings and either Enable NTRIP Mode and change the DGPS Baud Rate to 115200 if you are using an
NTRIP Modem, or if you are using a Static Base Station, leave Disabled and then select the correct baud rate -
either 115200 for a Racelogic blue boxed radio or 38400 for a Satel grey boxed radio.
Ensure that the TRIP Modem or Static Base Station is connected/configured correctly.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
9
Note: The external antenna should be used If you are receiving RTK corrections with a VBOX Touch RTK unit.
13. If you have a VBOX Touch RTK unit, it is also possible to change the 3rd tracked constellation between Beidou
and Glonass if required by navigating to GNSS Selection within the General Settings screen.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/Quick_Start_Guides/VBOX_Touch_Accel_Mode_-
_Quick_Start_Guide
10
Altri manuali per VBOX Touch
7
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Racelogic Registratore di dati
Racelogic
Racelogic Performance Box Touch V2 Manuale utente
Racelogic
Racelogic VBOX Touch v2 Manuale utente
Racelogic
Racelogic VBTOUCHR-V1 Manuale utente
Racelogic
Racelogic VBOX Touch Manuale utente
Racelogic
Racelogic VBOX Touch V2 Manuale utente
Racelogic
Racelogic VBOX II Manuale utente
Racelogic
Racelogic VBOX3i Manuale utente
Racelogic
Racelogic Performance Box Touch V2 Manuale di istruzioni
Racelogic
Racelogic VBOX LapTimer Manuale utente
Racelogic
Racelogic VBOX Micro Manuale utente
Racelogic
Racelogic VBOX Sport Manuale utente
Racelogic
Racelogic VB2SX Manuale utente
Racelogic
Racelogic VBOX II Manuale utente
Racelogic
Racelogic VBOX Touch V2 Manuale utente
Racelogic
Racelogic VBOX Micro Manuale utente
Racelogic
Racelogic VBOX Touch Manuale utente
Racelogic
Racelogic VBOX Touch Manuale utente
Racelogic
Racelogic PROLITE Manuale utente
Racelogic
Racelogic VBOX LapTimer Manuale utente
Racelogic
Racelogic VBOX SIGMA Manuale utente
