Radio Shack NWR-SAME Weatheradio Manuale utente

www.radioshack.comSM

OWNER’S MANUAL —

Please read before using this equipment.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

Thank you for buying the

RadioShack Portable

Handheld NWR-Same

Weatheradio. It uses

Specific Area Message

Encoding (SAME) circuitry to

provide more complete

information about weather

conditions in your immediate

area, letting you avoid hearing

alerts for geographical areas

that do not interest you. There

are 10 location codes that can

be programmed for multiple

location warnings. The

warnings are indicated by

WARNING, STATEMENT, and

WATCH.

!IMPORTANT !

If an icon appears at the end of a paragraph, go to the box on that page with the

corresponding icon for pertinent information.

Ô— Note

Portable Handheld

NWR-SAME

Weatheradio

12-259

DC 6V Jack

º—On/Off

TR/HM — Select

data receive

modes: travel or

home.

All manuals and user guides at all-guides.com

all-guides.com

How Your Weatheradio‚ Works

HOW YOUR

WEATHERADIO

WORKS

Traditional weather radios simply

receive the National Oceanic and

Atmospheric Administration (NOAA)

weather broadcast (usually within a 50-

mile radius), thensound an alarm ifany

emergency code was transmitted along

with the broadcast. This means that

people outside an affected area are

often alerted even though their area is

not affected, leading some to ignore

weather warnings that apply to their

own area.

In 1994, NOAA began broadcasting

signals called FIPS (Federal

Information Processing System) codes

along with their standard weather

broadcasts. These codes identify the

type of emergency and the specific

geographic (such as a country)

information about the codes, so you

can determine if the emergency might

affect your area. Only SAME-

compatible weather radios are able to

take advantage of this technology.

Each FIPS code identifies a specific

geographic area defined by the

National Weather Service (NWS), so

CONTENTS

How Your Weatheradio

Works ............................... 2

Preparation ....................... 3

Installing Batteries ........ 3

Using AC Power ........... 4

Power Up Reset ........... 4

Turning Power

On and Off .................... 5

Attaching the Belt Clip .. 5

Programming the

Weatheradio ..................... 6

Setting the Alarm .......... 7

Setting the Clock .......... 8

Selecting Temperature

Display Mode ................ 8

Selecting a Channel ..... 9

Selecting Alert Mode .. 10

Enabling/Disabling Missed

Alert Reminder ............ 11

Enabling/Disabling Signal

Loss Reminder ........... 13

Understanding the FIPS

Code ........................... 13

Response Location

Selection ..................... 15

Enabling/Disabling Alert

Tones .......................... 17

Receiving Weather Alerts 20

Viewing Signal

Strength ...................... 21

Locking Key ................ 21

Selecting Travel

/Home Mode ............... 21

Troubleshooting ............. 23

FCC Declaration of

Conformity ...................... 25

The FCC Wants

You to Know ................... 25

Care ............................... 27

Specifications ................. 27

All manuals and user guides at all-guides.com

Preparation

your Weatheradiosounds an alert

only when a weather emergency is

declared in that area. This helps you

more efficiently track the weather

conditions in and around your area.

PREPARATION

INSTALLING BATTERIES

1. Pull down the latch on the battery

compartment cover and then

remove the cover.

2. Install three AA batteries (not

supplied) as indicated by the

polarity symbols (+ and –) marked

inside.Ô.

3. Replace and secure the cover.

Full battery power is indicated on the

display as j. When battery power is

weak, ²appears. Further operations

are not allowed until you replace the

batteries. Ô

ÔNOTE Ô

•

Be sure to turn off th

power first and then

replace the batteries

in less than 1 minute

as to keep the set

clock time. If it takes

more than 1 minute

to replace, the clock

time may be reset.

ÔBATTERY NOTES Ô

• Dispose of old batteries

promptly and properly.

• Do not burn or bury

batteries.

• Use only fresh batteries of

the required size and

recommended type.

• Do not mix old and new

batteries, different types

of batteries (standard,

alkaline, or rechargeable),

or rechargeable batteries

of different capacities.

• If you do not plan to use

the weatheradio for a

month or more, remove

the batteries. Batteries

can leak chemicals that

can damage electronic

parts.

All manuals and user guides at all-guides.com

Preparation

USING AC POWER

Your Weatheradiocan also use 6V,

300mA AC/DC adapter with plug size H

(not supplied) for normal operation.

With AC connected, normal operation

is allowed even if there are batteries in

unit.

1. Open the rubber DC 6V jack cover.

2. Insert the AC/DC adapter’s barrel

plug into DC 6V jack. Then plug

the adapter into a standard AC

outlet.

POWER UPRESET

When powered on for the first time after

installing batteries, all LCD segments

turn on for one second. The device

starts to search for the best (strongest)

weather channel. Reset the

Weatheradioto default settings by

following the steps below.Ô

1. Remove the batteries and/or

disconnect AC power.

2. Hold down WX and re-insert

batteries or reconnect to AC

power. Hold down WX until USER

SETUP appears and a short beep

sounds.

ÔNOTE Ô

The backlight is on

when receiving an alert

message, or for any key

operation.

All manuals and user guides at all-guides.com

Preparation

3. Release WX and press MENU.

DEFAULT ON appears briefly, and

then USER SETUP appears.

4. Remove batteries and/or

disconnect AC power. Reinsert to

begin use.

TURNING POWER

ONAND OFF

Press and hold down Gfor two

seconds to turn the Weatheradioon

and off. Ô

ADJUSTING VOICE AND

TONE VOLUME

1. Press WX to turn on broadcast.

2. Repeatedly press eor dto adjust

the volume to the desired listening

level. VOLUME:and the volume level

appear.

3. Press WX to turn off the weather

broadcast.

4. Repeatedly press eor dto adjust

the alert tone volume to the

desired listening level. TONE VOL:

and the alert tone level appear.

ÔNOTE Ô

If power is off, weather

alert messages are not

detected.

All manuals and user guides at all-guides.com

Programming the Weatheradio‚

ATTACHING THE BELT CLIP

Insert the clip into the hole at the back

of the weatheradio until it clicks. To

remove the belt clip, press the button

on the tip of the clip and pull it out.

ATTACHING THE WRIST

STRAP (NOT SUPPLIED)

Slide the wrist strap’s small loop under

the bar at the back of the weatheradio.

Then pull the strap’s large loop through

the small loop and fasten it.

PROGRAMMING THE

WEATHERADIO

YourWeatheradiois pre-programmed

with seven NOAA broadcast

frequencies (channels 1-7). Depending

on your location, you might need to

select a different channel.

Your Weatheradiois presetto receive

any weather alert broadcast within

about a 50 mile radius. The first time

you use your Weatheradio, it scans

for the strongest channel and receives

all SAME alert signals broadcast within

a 50 mile radius of its location. Ô

ÔNOTE Ô

• The weatheradio

doesnot receivealert

signals during

programming.

• If you press MENU or

do not press a key for

45 seconds while

programming, the

weatheradio saves

all valid entries you

made and exits

programming mode.

All manuals and user guides at all-guides.com

all-guides.com

Programming the Weatheradio‚

1. Press MENU. The following

functions can be set:

2. Press eor dto scroll through

functions. Press gto select a

function to modify. Press fto go

back to the previous mode or to

exit.

SETTING THE ALARM

1. Press MENU. Then press eand d

until SET ALARM appears.

2. Press g. Éand alarm time appear.

The first time you activate the

alarm, the alarm time shows 12:00

AM. Ô

3. Press g. The hour digits flash.

Repeatedly press eor dto set the

desired hour.

4. Press g. The minute digits flash.

Repeatedly press eor dto set the

desired minutes.

SET ALARM SET CLOCK

TEMPERATURE SELECT CH

ALERT MODE ALT REMINDER

SIG REMINDER AREA SELECT

TONE DEFEAT

ÔNOTE Ô

• Repeatedly press e

or d to enable or

disable the alarm.

The alarm is enabled

with Éon and

disabled with É

flashing.

All manuals and user guides at all-guides.com

Programming the Weatheradio‚

5. Press g. AM or PM flashes.

Repeatedly press eor dto make

your selection.

6. Press g to confirm. One long beep

sounds. Press MENU to exit.

At the set alarm time, the

Weatheradiogenerates an alarm.

Press any button to stop the alarm.Ô

SETTING THE CLOCK

1. Press MENU. Then press eor d

until SET CLOCK and Ì appear.

2. Press g. The hour digits flash.

Press eor dto set the hour.

3. Press g. The minute digits flash.

Repeatedly press eor dto set the

minutes.

4. Press g. AM or PM flashes.

Repeatedly press eor dto

choose the desired format.

5. Press gagain to store the time. A

long beep sounds to confirm the

entry.

6. Press MENU to exit. Ô

ÔNOTES Ô

Setting the Alarm

• The alarm duration

is one hour under

standby mode and

is only five seconds

during NWS alert

broadcast.

Setting the Clock

• Hold down MENU

to view the clock

time during NWS

alert broadcast.

All manuals and user guides at all-guides.com

Programming the Weatheradio‚

SELECTING TEMPERATURE

DISPLAY MODE

1. Press MENU. Then press eor d

until TEMPERATURE appears.

2. Press g. The current temperature

reading flashes.

3. Press eor dto select the desired

temperature display mode (°F or

°C).

4. Press gto confirm the setting.

Press MENU to exit. Ô

SELECTING ACHANNEL

1. Press MENU. Then press eor d

until SELECT CH appears.

2. Press g. Ô

3. To automatically search for

channels, press gwhen AUTO

appears. CHANNELand SEARCHING…

appear. If there is an available

channel, CHANNEL, and the number

of the currently selected channels,

and AVAILABLE appear. If there is no

available channel, NOCHANNEL,

AVAILABLE, BACKTOCHANNEL, and the

number of the last selected

ÔNOTE Ô

Selecting

Temperature

Display Mode

Thecurrenttemperature

is updated about every

30 seconds.

Selecting a Channe

• If Auto mode was

selected previously,

AUTO appears. If

Manual mode was

selected previously,

MANUAL appears.

• During manual

channel selection,

the weather

broadcast turns on

so that you can verify

a station exists on

the selected channel

• The Weatheradio

automatically

searches for and

tunes to the

strongest weather

broadcast channel in

your area if you

select AUTO.

All manuals and user guides at all-guides.com

Programming the Weatheradio‚

channel appear. AUTO appears and

the Weatheradiobeeps.

To manually search for channels,

press gwhen MANUAL appears.

CHANNEL and the number of the

currently selected channels

appear. The Weatheradiotunes

to a channel and turns on the

broadcast. To select another

channel, repeatedly press eor d

until the desired channel number

appears.

4. Press gto confirm the selection. A

beep sounds and CH, the number

of the currently selected channels,

and SELECT (the newly selected

channel) appear. Then SELECT CH

appears. Press MENU to exit.

SELECTING ALERT MODE

You can set the Weatheradioto

respond to an NWS alert broadcast in

one of two ways:

TONE — The Weatheradiosoundsan

alert for five minutes or until End of

Message is received and an alert

description appears until the alert’s

effective time expires. To turn off the

alert sooner, press WX. The

All manuals and user guides at all-guides.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Radio Shack Radio

Radio Shack

Radio Shack 12-826 Manuale utente

Radio Shack

Radio Shack DX-398 Manuale utente

Radio Shack

Radio Shack TRC-504 Manuale utente

Radio Shack

Radio Shack TRC-501 Manuale utente

Radio Shack

Radio Shack 21-1576 Manuale utente

Radio Shack

Radio Shack TRC-502 Manuale utente

Radio Shack

Radio Shack iSCAN PRO-18 Manuale utente

Radio Shack

Radio Shack 12-796 Manuale utente

Radio Shack

Radio Shack 2000649 / PRO-649 Manuale utente

Radio Shack

Radio Shack 120-0914 Manuale utente

Radio Shack

Radio Shack 2000629 Manuale utente

Radio Shack

Radio Shack 12-749 Manuale utente

Radio Shack

Radio Shack Pro-2035 Manuale utente

Radio Shack

Radio Shack 120-0737 Manuale utente

Radio Shack

Radio Shack Mobile/Marine 14-Channel FRS Radio Manuale utente

Radio Shack

Radio Shack 1201518 Manuale utente

Radio Shack

Radio Shack Realistic TRC-473 Manuale utente

Radio Shack

Radio Shack Bedside SAME Weatheradio Manuale utente

Radio Shack

Radio Shack PRO-106 Manuale utente

Radio Shack

Radio Shack 12-889 Manuale utente

Radio Shack

Radio Shack 1201850 Manuale utente

Radio Shack

Radio Shack 12-829 Manuale utente

Radio Shack

Radio Shack 12-827 Manuale utente

Radio Shack

Radio Shack Stereo Mate 12-922 Manuale utente

Manuali Radio popolari di altre marche

EisSound

EisSound KBSound iSelect Manuale utente

Midland

Midland 1001LWX Manuale utente

Konig

Konig HAV-SR41 Manuale utente

Roberts

Roberts exprssion Manuale utente

VDigi

VDigi DD3.0 Manuale utente

Roberts

Roberts Stream 207 Manuale utente

Sony

Sony Walkman SRF-M97 Manuale utente

Stanley

Stanley FatMax FMC770 Manuale utente

auna

auna DAB-Radio 10026947 Manuale utente

SOUNDMASTER

SOUNDMASTER UR190 Manuale utente

HYT

HYT TC-320 Manuale utente

auna multimedia

auna multimedia Yellowstone 10026851 Manuale utente

B-Tech

B-Tech GMRS-V2 Manuale utente

Weierwei

Weierwei VEV-V8 Manuale utente

SOUNDMASTER

SOUNDMASTER DAB750 Manuale utente

Telefunken

Telefunken TF-1505 Manuale utente

Makita

Makita LXRM03 Manuale utente

PRESIDENT

PRESIDENT TEDDY R. Manuale utente