RadioMaster Zorro Manuale utente
Content
1. Overview....................................................................................................................................... 4
1.1. Introduction............................................................................................................... 4
1.2. Safety information..................................................................................................... 4
1.3. Radio overview...........................................................................................................6
1.4. Battery and charging information..............................................................................7
1.5. Manual and firmware download............................................................................... 7
1.6. Specifications............................................................................................................. 8
1.7. Warranty and repair...................................................................................................8
1.8. Disclaimer...................................................................................................................8
1.9. Legal status and copyright......................................................................................... 9
2. First boot..................................................................................................................................... 10
2.1. Calibrating Gimbals.................................................................................................. 11
2.2. Set the default Gimbal mode and the default channel.......................................... 12
output order....................................................................................................................12
3.Radio menu.................................................................................................................................. 13
3.1. Main interface..........................................................................................................13
3.1.1. Reset, Statistics and About........................................................................... 14
3.2. System settings........................................................................................................ 14
3.2.1 TOOLS.............................................................................................................15
3.2.2 SD CARD......................................................................................................... 15
3.2.3 RADIO SETUP..................................................................................................16
3.2.4 GLOBA FUNCTIONS........................................................................................ 17
3.2.5 TRAINER......................................................................................................... 17
3.2.6 HARDWARE.................................................................................................... 17
3.2.7 VERSION......................................................................................................... 18
3.3. Model selection........................................................................................................18
3.3.1. Create model and model selection..............................................................18
3.4. Model settings (Model Setup）.............................................................................. 19
3.4.1 Model settings（Model setup）...................................................................19
3.4.2 Flight Mode（Flight Modes）.......................................................................22
3.4.3. Global variables（Global Variables）.......................................................... 22
3.4.4. . Input Source（Inputs）..............................................................................24
3.4.5. Mix control (Mixer)...................................................................................... 26
3.4.6. Output（Outputs）......................................................................................29
3.4.7. Curves............................................................................................................30
3.4.8. Logic switches（Logical Switches）............................................................. 31
3.4.9. Special Functions.......................................................................................... 34
3.4.10. Digital Transmission and Telemetry........................................................... 36
3.4.11. Display.........................................................................................................38
1. Overview
1.1. Introduction
Thank you for purchasing the RadioMaster ZORRO radio system. Advanced and highly-versatile,
ZORRO is adaptable for pilots of any skill level. To ensure safe and reliable operations, please
read this manual carefully prior to use.
As the software and hardware are constantly improved, the information contained in this
manual is subject to change without prior notice. Please visit our website for up-to-date
information and radio firmware.
ZORRO is an open-sourced, ergonomic radio with powerful multi-protocol capability. Able to
bind to most contemporary protocols on the market, this is one radio to rule them all! ZORRO
runs EdgeTX, an open-sourced operating system; for more information, please visit the EdgeTX
link below.
-The RadioMaster team
1.2. Safety information
Radio-controlled models commonly contain sharp components like propellers, rotating at high
RPMs; when operating or maintaining the model, always use common sense and proceed with
caution.
Always disconnect power to the model AND remove propellers (if applicable) during the
assembly or maintenance process.
Never operate the ZORRO radio system in the following conditions:
• In severe weather or strong windy conditions, such as rain, hail, snow, storms or
electromagnetic environments.
• In limited visability
• In the proximity of other people, property, high-voltage power lines, public roads, vehicles or
animals
• When feeling unwell, or under the influence of drugs or alcohol.
• If the ZORRO radio system/model is damaged or showing signs of interference.
• In areas with high 2.4GHz interference or where 2.4GHz radios are prohibited.
• When the TX/RX battery is low.
• In areas where local regulations prohibit the use of R/C aircraft.
WARNING!
Zorro is pre-installed with the most stable firmware at the factory at time of release. please only
attempt to update the firmware if you are confident in the process. Incorrect firmware updates
may cause the remote control to become inoperable. Damage as a result of improper firmware
update may not be covered under warranty.
1.3. Radio overview
1.4. Battery and charging information
ZORRO is powered by 2x 3.7V 18350 Lithium Ion cells and is charged using the built-in USB-C
port. The charging circuitry is designed for charging 2x 3.7V Lithium Ion/Poly or 1x 7.4V Lipo
battery pack only; the nominal voltage is 3.7V and the maximum charging voltage is 4.2V.
Never charge 3.6V LiFe and 3.6V 18350 Lithium Ion packs with the onboard charger. Charging or
using the wrong battery chemistry/polarity may cause permanent damage to the PCB and in
certain situations cause fires.
Check the voltage and condition of the battery regularly and never charge the device
unattended. Only charge in safe areas away from combustable materials. Refrain from charging
the radio unit if it was exposed to water or was damaged in any way. RadioMaster does not
assume any responsibility for any adverse consequences caused by the use or misuse of this
product.
1.5. Manual and firmware download
ZORRO is pre-installed with factory approved EdgeTX firmware and is also capable of operating
OpenTX. To download the latest manual or stock factory firmware, please visit the RadioMaster
website: https://www.radiomasterrc.com
When updating your radios firmware we would encourage you to use EdgeTX Buddy.
EdgeTX
http://edgetx.org/ (Information about EdgeTX)
https://buddy.edgetx.org/ (easy to use tool for FW updates)
OpenTX
https://www.open-tx.org/ (Information as OpenTX)
1.6. Specifications
Size：174*86*157.5mm
Weight：355g（No battery）
Frequency：2.400GHZ-2.480GHZ
Transmitting power：Module dependant
Antenna gain：2db
Battery：3.7V 18350 Lithium Ion
Charge port：USB-TypeC
Operation voltage：DC 6.6-8.4v
Range：> 2km @ 20dbm
Firmware：EdgeTX（Transmitter)
Channels：Up to 16 (Rx dependent)
Display：128*64 Monochrome LCD display
Gimbals：High precision potentiometer/ Hall-effect sensor (Package dependent)
External module：8Pin Nano Port
Upgrade method：USB/SD card & EdgeTX Companion PC software
1.7. Warranty and repair
Should any issues arise with your radio system's hardware, please keep the proof of purchase
and contact the retailer where you made the ZORRO purchase. . You may also visit our warranty
support page https://www.radiomasterrc.com/contact
The limited warranty covers defects in workmanship for one year from the date of purchase
1.8. Disclaimer
OpenTX/EdgeTX are open source firmware. No warranty or implied warranty is given for the
quality and reliability of this firmware. If not handled properly, the RC model can cause serious
injury or even death. If you decide to use OpenTX/EdgeTX firmware, you are solely responsible
for your model. Any injury or damage caused by using OpenTX/EdgeTX firmware The authors of
OpenTX/EdgeTX and RadioMaster assume no responsibility. Use with caution.
1.9. Legal status and copyright
This project is free software: you can redistribute and / or modify it in accordance
with the GNU General Public License Agreement, V3 version agreement, or (optionally)
an updated version agreement issued by the International Free Software Association. You
should receive a copy of the GNU General Public License Agreement for the
OpenTX/EdgeTX project. If not, see www.gnu.org/licenses. OpenTX/EdgeTX is open sourced
firmware for RC radio controllers. The firmware is highly
configurable and has more features than traditional radios. Daily feedback from
thousands of users ensures continuous firmware updates as well as stability and
quality. The release of OpenTX/EdgeTX firmware hopes that it will benefit the public, but it has
no
warranty; it does not include implied commercial licenses or applicability for a special
purpose. For more details, see the GNU General Public License Agreement. OpenTX/EdgeTX
source files and more can be found at https://github.com/opentx/opentx and
https://github.com/edgetx/edgetx.
2. First boot
Press and hold the power button to boot. Before entering the main interface, the system will
check the position of the throttle stick and switch and other startup conditions. If the startup
conditions are not met, there will be a corresponding error prompt. You need to clear it or press
any key to move forward Throttle warning: This is a warning that the throttle is not at the lowest
position when the radio is turned on. You can set the throttle stick to the lowest position or
press any key to skip. You can also turn off the throttle state option in the MODEL SETUP menu.
Throttle alarm.
Switch warning: This is a warning that a switch on the radio -control is not in the default position.
(The default setting is that all switch directions are up ↑)
Failsafe not set warning: This is a warning that the radio-control fail-safe protection is not set.
Alarm off warning: A similar warning will sound if the volume is set to mute.
Altri manuali per Zorro
1
Indice
Altri manuali RadioMaster Telecomando
RadioMaster
RadioMaster TX16S Manuale utente
RadioMaster
RadioMaster TX8 Manuale utente
RadioMaster
RadioMaster TX12 Manuale utente
RadioMaster
RadioMaster TX12 Manuale utente
RadioMaster
RadioMaster TX16S Manuale utente
RadioMaster
RadioMaster T8 Manuale utente
RadioMaster
RadioMaster TX12MKII Manuale utente
RadioMaster
RadioMaster TX16S Manuale utente
RadioMaster
RadioMaster T8 Pro Manuale utente
RadioMaster
RadioMaster T8 Pro Manuale utente
