RADVision SCOPIA Elite 5230 Istruzioni di montaggio
DRAFT DATE: MAY 20, 2009 10:14 PM
Platform Guide
6&23,$(OLWH23
NOTICE
© 2000-2009 RADVISION Ltd. All intellectual property rights in this publication are owned by
RADVISION Ltd and are protected by United States copyright laws, other applicable copyright laws
and international treaty provisions. RADVISION Ltd retains all rights not expressly granted.
This publication is RADVISION confidential. No part of this publication may be reproduced in any
form whatsoever or used to make any derivative work without prior written approval by
RADVISION Ltd.
No representation of warranties for fitness for any purpose other than what is specifically mentioned
in this guide is made either by RADVISION Ltd or its agents.
RADVISION Ltd reserves the right to revise this publication and make changes without obligation to
notify any person of such revisions or changes. RADVISION Ltd may make improvements or
changes in the product(s) and/or the program(s) described in this documentation at any time.
If there is any software on removable media described in this publication, it is furnished under a
license agreement included with the product as a separate document. If you are unable to locate a
copy, please contact RADVISION Ltd and a copy will be provided to you.
Unless otherwise indicated, RADVISION registered trademarks are registered in the United States
and other territories. All registered trademarks recognized.
GoAhead WebServer is used by permission from GoAhead Software, Inc. Copyright © 2006
GoAhead Software, Inc. All Rights Reserved.
For further information contact RADVISION or your local distributor or reseller.
SCOPIA Elite 5230 Platform, June 2009
Publication 2
http://www.radvision.com
Contents iii
About This Manual
Related Documentation v
Feedback v
1SCOPIA Elite 5230 Platform Overview
SCOPIA Elite 5200 Chassis 1
SCOPIA Elite 5200 Chassis Main Features 2
Front and Rear Views of the of the SCOPIA Elite 5200 Chassis 3
SCOPIA Elite 5000 Media Blade Panel Features 4
Shelf Manager 5
Shelf Manager Main Features 5
Shelf Manager Panel Features 5
2Cable Connections and Pin-outs
9-Pin Serial Port Terminal Cable 7
RJ-45 8-Pin IP Network Port 8
100 Mbps Ethernet 8
1 Gbps Ethernet 8
3Safety
Installation Safety 11
Electrical Safety 12
Grounding 12
Power Supply 13
CONTENTS
About This Manual v
ABOUT THIS MANUAL
The SCOPIA Elite 5230 Platform Guide provides information on the
SCOPIA Elite 5230 platform and its components. For information and operating
procedures pertaining to a specific element board or application, refer to the
corresponding manual provided with the product.
RELATED
DOCUMENTATION The SCOPIA Elite 5230 platform documentation set is available on the
RADVISION Utilities and Documentation CD-ROM supplied with the product
and includes manuals in PDF format.
Note You require Adobe Acrobat Reader version 6.0 or later to open the PDF
files. You can download Acrobat Reader free of charge from www.adobe.com.
FEEDBACK The team at RADVISION constantly endeavors to provide accurate and
informative documentation. If you have comments or suggestions regarding
improvements to future publications, we would value your feedback.
We thank you for your contribution.
vi SCOPIA Elite 5230 Platform Guide
SCOPIA Elite 5230 Platform Overview 1
1
SCOPIA ELITE 5230 PLATFORM
OVERVIEW
The SCOPIA Elite 5230 platform is a high performance, multi-functional chassis
that supports mix-and-match functionality. This highly configurable and scalable
design provides maximum flexibility for configuring platforms to meet a wide
variety of functional and performance application requirements.
The SCOPIA Elite 5230 platform includes these components:
The SCOPIA Elite 5200 chassis
Two SCOPIA Elite 5000 Media Blades
A SCOPIA Elite Shelf Manager
We describe each component in these sections:
SCOPIA Elite 5200 Chassis on page 1
SCOPIA Elite 5000 Media Blade Panel Features on page 4
Shelf Manager on page 5
SCOPIA ELITE
5200 CHASSIS
SCOPIA Elite 5200 Chassis Main Features on page 2
Front and Rear Views of the of the SCOPIA Elite 5200 Chassis on page 3
1
2 SCOPIA Elite 5230 Platform Guide
SCOPIA Elite 5200 Chassis
SCOPIAELITE 5200
CHASSIS MAIN
FEATURES
The SCOPIA Elite 5200 chassis is a 3U chassis which can hold two RADVISION
SCOPIA Elite MCU Media Blades and a shelf manager.
The upper MCU functions as the master blade, providing the single management
interface and controlling both blades in the chassis. The LAN connection is via
the upper blade. The lower MCU functions as the slave.
Table 1-1 Chassis Main Features
Field replaceable units (FRUs) All boards, Power Supply Units and fan
drawers are field replaceable units
Hot swap All FRUs are hot-swappable—removing or
replacing an FRU (except a Power Supply
Unit) does not affect the operation of other
FRUs.
Grounding and electrostatic discharge The chassis includes an external
GND 4mm stud as per the TUV
requirement).
The chassis includes 4mm
banana jacks for a 4.5mm plug or
a standard 0.166" plug, as per the
PICMG 3.0 specification.
Cooling The chassis supports a single failed fan in
the fan tray.
Power supply Default AC power supply as the
default choice.
Universal 90-264 VAC power
ports.AC power entry includes
regular IEC320-C14 filtered AC
inlet and double pole switch
located in the rear.
Thermal shutdown if the unit
heats up beyond its limits.
SCOPIA Elite 5230 Platform Overview 3
SCOPIA Elite 5200 Chassis
FRONT AND REAR
VIEWS OF THE OF THE
SCOPIAELITE 5200
CHASSIS Figure 1-1 Chassis Front Panel
Figure 1-2 Chassis Rear Panel
STATUS
STATUS
RESET
HOT SWAP
RESET
HOT SWAP
PWR ALARM
STATUS
FAN ALARM-R
FAN ALARM-L
MEDIA BLADE
MEDIA BLADE
CONTROL BLADE
Elite 5200
4 SCOPIA Elite 5230 Platform Guide
SCOPIA Elite 5000 Media Blade Panel Features
SCOPIA ELITE
5000MEDIABLADE
PANEL FEATURES
Figure 1-3 Media Blade Front Panel
Table 1-2 Media Blade Panel Features
STATUS
RESET
HOT SWAP
MEDIA BLADE
521 6
4
3
Component Description
1 STATUS LED Lights green to indicate normal operation. Lights red to
indicate that an error has occurred and that the Media
Blade requires resetting.
2 Serial connector A DB-9 connector that allows you to connect a PC
terminal for local configuration, maintenance and
debugging.
3 100/1000 BASE-T
Ethernet connectors RJ-45 connectors that provide the primary LAN
connection for the IP network port.
4 Ethernet connector
Link/Activity LEDs The top part of each Ethernet connector contains two LED
indicators. The right LED lights green when the local IP
network link is active. The left LED lights green if the
connection speed reaches 1000 Mbps, and lights orange if
the connection speed reaches 100 Mbps.
5 RESET button Allows you to reset the Media Blade manually.
6 HOT SWAP LED Lights blue when the latches of the board are unlocked and
it is safe to remove the board from the chassis, and during
reset. Goes off when the board is completely detached.
Questo manuale è adatto per i seguenti modelli
2
Indice
