RADWAG PM C32 Guida utente
Start up Guide
• PM C32
Precision Balances
IMMB-09-01-09-20-EN
To view a complete User Manual go to the website or scan QR code:
radwag.com/en/manuals/3670
1. CONTENT
*The plug type may vary by country.
Models: PM C32 (max: 25-50 kg)
Models: PM C32 (max ≤ 15 kg)
Power adapter*
×1
Power adapter*
×1
Power adapter*
×1
Precision balance
×1
Precision balance
×1
Precision balance
with weighing pan
×1
Weighing pan
×1
Weighing pan
×1
2. UNPACKING
1 2 3
Models: PM (max: 10-50 kg)
Models: PM 60.1.C32 (max ≥ 60 kg)
3. RECOMMENDATIONS AND WARNINGS
Operate the device in a room where the temperature ranges between 10–40 °C
(50–104 °F) and where the relative humidity is below 80%. Temperature must
change slowly and gradually.
Using the anti-vibration table is recom-mended in order to enable the most stable
and repeatable measurement.
+10 oC
+50 oF
+104oF
+40 oC
Avoid air drafts and air movements
at the workstation.
Place the balance away from heat
sources. Avoid exposing the balance
to the sunlight.
Avoid exposing the balance to a mag-
netic field. Do not weigh magnetic
substances.
Not intended for usage within EX
zones. Not intended for weighing
explosive or flammable substances.
Make sure that the balance is placed
on an even surface.
Do not place the balance on an
unstable surface exposed to shocks
and vibrations.
1 2 3
Models: PM C32 (max ≥ 60 kg)
Keep the packaging should a warranty
claim or service be required.
4. ACTIVITIES TO BE DONE PRIOR TO OPERATION
4.2. Grounding spring check
Check whether the grounding
spring takes its intended
location.
Make sure that the grounding
spring juts slightly out of the
hole.
Grounding
foot
21
Models: PM C32 (max = 60 kg only)
Models: PM C32 (max: 10 - 50 kg only)
4.1. Remove transport lock
5. COMPONENTS ASSEMBLY
Models: PM C32 (max ≤ 15 kg)
1 2
6. PREPARING FOR WORK
6.1. Temperature stabilization
Place the device at the workstation, wait until
it reaches room temperature.
Prior to switching the device on,
let it reach room temperature
(estimated stabilisation time: 1-8 hours).
Connect the power adapter
to DC connector.
Connect the power
adapter to the mains.
1 2 3
1
up to 1- 8 h
Models: PM C32 (max: 25-50 kg)
Models: PM C32 (max = 60 kg)
1
1
2
2
6.2. Balance levelling
Your balance is ready to use!
To switch the device on, press ON / OFF key.
6.3. Switching the balance on
Models: PM C32 (max: 10 - 50 kg)
Models: PM C32 (max = 60 kg)
To level the balance, turn its
feet and keep turning the feet
until an air bubble takes the
central position.
To level the balance, turn its
feet and keep turning the feet
until an air bubble takes the
central position.
7. PANEL AND SCREEN
7.1. Panel keys
7.2. Home screen
Proximity sensor
Switching on / off
Main menu
Log in
Cancel
Text / Numeric
keyboard mode
Back / delete
Zeroing
Taring
Weighing unit
Confirm
Working mode
ENTER / PRINT
Text / Numeric keyboard
with navigation keys
Proximity sensor
Editable quick
access toolbar
Configurable additional
information field
Weighing result
window
Status bar
Working mode Communication status
Adjustment Print footerPrint header Select product Databases
Press the key under the icon to start
the adjustment.
Wait for the adjustment completion.
8. BASIC OPERATIONS
8.1. Adjustment
1 2
8.3. Taring
8.2. Zeroing
1
1
2
2
With loaded weighing pan: upon stabilization
of the weighing result, press key.
Make sure that the weighing pan is empty
and press key.
The balance has been tared.
The balance has been zeroed.
0.68
0.68
0.21
0.21
0.21 0.21
9. SETTINGS
9.1. Administrator’s logging in
1 2
Some balance settings are accessible for Administrator exclusively.
Prior balance parameters setup, log in as the Administrator.
Press key To enter ‘’User’’ menu.
Users list is displayed. Using keys, select
“Admin” option and press key to confirm.
Log out
2
Admin
Operators
Admin
8.4. Working modes selection
8.5. Units selection
Weighing
Dosing
Checkweighing
Formulations
Percent weighing
Statistics
Parts counting
Animal weighing
Solids density
Liquids density
Peak hold
•Gram [g]
•Miligram [mg]
•Carat [c]
•Pound [lb]
•Ounce [oz]
•Troy ounce [ozt]
•Pennyweight [dwt]
•Hong Kong Tael [tlh]
•Singapore tael [tls]
•Taiwanese tael [tlt]
•Chinese tael [tlc]
•Momme [m]
•Grain [gr]
•Tical [ti]
•Newton [N]
•Baht [baht]
•Tola [tola]
•Mesghal [msg]
•User unit 1
•User unit 2
Using key enter working modes menu. Using keys select working
mode and press key to confirm.
Press the key to change the weight unit.
The balance enables selecting the
following weighing units:
Altri manuali per PM C32
1
Indice
Altri manuali RADWAG Scala
RADWAG
RADWAG WPW/E Manuale utente
RADWAG
RADWAG WLC Manuale utente
RADWAG
RADWAG WPY Manuale utente
RADWAG
RADWAG WPY/KB series Manuale utente
RADWAG
RADWAG C32 Manuale utente
RADWAG
RADWAG WTC/L series Manuale utente
RADWAG
RADWAG XA 4Y.A PLUS Guida utente
RADWAG
RADWAG PM 10.C32 Manuale utente
RADWAG
RADWAG WTC series Manuale utente
RADWAG
RADWAG AS X2 PLUS Guida utente
RADWAG
RADWAG PS X7.M Guida utente
RADWAG
RADWAG WTC 6 Manuale utente
RADWAG
RADWAG XA 5Y.M.A Guida utente
RADWAG
RADWAG MW-01-A Manuale utente
RADWAG
RADWAG HTY 15 C1/K Manuale utente
RADWAG
RADWAG WTB series Manuale utente
RADWAG
RADWAG WLX series Manuale utente
RADWAG
RADWAG AS R2.PLUS Manuale utente
RADWAG
RADWAG UYA 5Y Guida utente
RADWAG
RADWAG WTC 200 Manuale utente
