Raidon SR2611-2S-S2+ Manuale utente

v3.0 (December, 2009)

SR2611-2S-S2+

User Manual

Index

Check Package Contents and Accessories......................................................... 3

Hardware Introduction......................................................................................... 4

System Requirement & Environment Requirement and Notices......................... 4

Hardware Installation Procedure......................................................................... 5

Connecting SR2611 to your computer................................................................. 6

Setting the Hard Drive Array Mode...................................................................... 6

OS Backup.......................................................................................................... 7

Computer Set Up................................................................................................. 8

Hard Disk status on LCD screen......................................................................... 9

GUI Monitoring Software & FW Updating............................................................ 11

Appendix: Trouble Shooting/Q&A........................................................................13

Check Package Contents and Accessories

SR2611 system includes the following:

Item Quantity

SR2611 1

Removable Carrier 2

45cm SATA Cable 1

Product CD 1

Accessory bag 1

(includes 6#-32 screws x 8 pcs , Key for keylock x 2)

SR2611 Removable Carrier

45cm SATA Cable

Accessory bag Product CD

Note :

Please check above parts are included prior to installation. The accessory bag contains

screws and a plastic key.

SATA

Check Package Contents and Accessories 3

Hardware Introduction

Front Panel Real Panel

1LCD Panel 2HDD Tray 1eSATA Port 2Power Socket

3Mute Button 4Key Lock 3RAID Mode 45cm Fan

5HDD Access LED 6Fail LED

Note :

Status Indications of LEDs:

HDD Access LED will ash yellow when the data is accessed from the hard drive.

Fail LED will light red when HD failed, temperature is higher than 60 C or fan fails.

System Requirement & Environment

requirement and notices

Hardware Requirement

1. Computers or servers with SATA I& SATA II

2. Hard drive with SATA I& SATA II

Environment requirement and notices

1. SR2611’s brilliant design allows the user to simultaneously utilize two hard drives manu

factured by different companies. However, if the user expects better efciency, we strongly

recommend the users to use hard drives manufactured by the same manufacturer.

2. Since the system uses more stringent factors to determine the disk corruption in the hard

drive, please use noncorrupted hard drive with minimum storage capacity of 20 GB.

3. The SR2611 had undergone strict hard drive compatibility test. The result shows that it is

compatible with most hard drives on the market such as Maxtor, Western Digital, Seagate,

Fujitsu, Hitachi, and etc. However, due to the new types of hard drives appearing on the

market, if your hard drive is not compatible with the system, please contact us through the

following email:[email protected] and we will reply as soon as possible.

153

4 Hardware Introduction / System Requirement & Environment requirement and notices

4. The SR2611 is equipped with a 5.2 cm ball bearing cooling fan that will provide effective

cooling for the 7200&10000 rpm hard drive. We highly recommend using computer

chassis with effective cooling design to avoid disk array crashing due to ineffective

cooling.

5. SR2611 supports RAID 0 & RAID 1.

Hardware Installation Procedure

1. Connect the SATA cables on the removable hard drive carrier to the pins of hard drive.

2. Secure the hard drive into the removable hard drive carrier by the screws which provided

in the accessory pack.

Hardware Installation Procedure 5

Connecting SR2611 to your computer

1. Connect DC12V&5V power cables and SATA cables to SR2611.

2. Connect SATA cable to SATA port on the motherboard.

45cm SATA Cable Power Supply Connector

Real Panel

Internal Case

Note :

We do not recommend users to disassemble the machine without proper instructions and

authorization. The manufacture warranty will not cover damage caused by unauthorized

disassembling.

Setting the Hard Drive Array Mode

Please select the RAID mode with the jumper located at the back panel. The original default

is RAID 1, still there are three pins at the back panel for RAID mode selection:

RAID 0 mode by setting the jumper on the left of the two pins.

RAID 1 mode by setting the jumper on the right of the two pins.

1. RAID 0 Mode

1). Place two new hard drives into SR2611 and strongly suggest you to use two identical

hard drives to get the equal capacity. If the capacity is different, SR2611 is downward

to the small hard drive capacity.

2). Under RAID 0 mode, capacity is add up to a one big volume, also with the feature of

faster read/write performance efcient.

SATA

1 2

SATA Ports

Power Supply SR2611

Motherboard

6 Connecting SR2611 to your computer / Setting the Hard Drive Array Mode

2. RAID 1 Mode

1). Place two new hard drives into SR2611 and strongly suggest you to use two identical

hard drives to get the equal capacity. If the capacity is different, SR2611 is downward

to the small hard drive capacity.

2). Under RAID 1 mode, two hard drives has the identical information as one to mirror to

the other one, therefore each of the hard drive failed is still able to function normally.

When you replace the failed hard disk to the new one the system automatically

rebuilding the data to the newly place hard disk.

OS Backup

Installing a brand new hard drive and a hard drive with existing data. Internal RAID module

is suggested to be used for OS backup data.

1. We highly recommend using the same brand of hard drives with the same or larger stor

age capacity when installing hard drives to SR2611. The user can use the auto rebuilding

function to automatically format the new drive and subsequently to back up the data into

the new hard drive.

2. Place the hard drive with existing data into slot 1 or 2 in the SR2611.

3. Since one of the slots is empty, the buzzer will alarm user about the empty slot when the

computer is turned on. To shut off the buzzer alarm, just push the bottom located in the

front display screen.

4. After turning on the operation system, please check whether the current SR2611 setting

is the same prior to hard drive installation. Then place the new hard drive in the removable

hard drive carrier into another slot. Note: the storage capacity of the newly installed hard

drive must be larger than or equal to the old hard drive.

5. The SR2611 will start the auto rebuilding function shortly after.

6. Please press the Buzzer bottom after auto rebuilding to reset the buzzer alarm and to

return the system operation normally.

7. If you use this install method and backup OS at the same time, please make sure that the

system is installed normally, in case of error or OS backup failure.

OS Backup 7

Computer Set Up

When the hardware setup for SR2611 is complete, you are now ready to turn the machine

on.

1. After the hardware installation is complete, the SR2611 will be treated as one single hard

drive. Set the hard drive to AUTO in the computer’s BIOS. When the computer is turned

on, the system will retrieve the following information:

2. In SR2611, the installed hard drive can be detected by the Device Manager of Computer

Management for Windows.

3. Customers can choose to format the hard drive by using the Disk Management tool of the

operating system before using the SR2611

At this point, the installation process is completely nished. The user can freely retrieve and

save data to SR2611 just like retrieving and saving data to a regular hard drive. If the user

experiences any abnormality during the operation, please refer to the trouble shooting Q&A

section in Appendix.

8 Computer Set Up

Hard Disk status on LCD screen

Left Hard Drive (Primary Hard Drive) Fail

1. Right Hard Drive (Secondary Hard Drive) Normal

2. Primary hard drive storage capacity larger than secondary hard drive

3. Secondary hard drive storage capacity larger than primary hard drive

Hot Swap & Auto Rebuilding

The hard drive Hot Swap and Auto Rebuilding functions are available.

(The Hot Swap & Auto Rebuilding functions are applicable in)

1. Off-line Back up

When the data is stored within SR2611, the user can remove one of the hard drives from

SR2611 as back up drive for data such as system operation le, secured les, seldom

modied les or image and music les. The user can periodically insert the hard drive

back into SR2611 to execute automatic backup to protect the system from being hit by

computer virus or to avoid risk of having both hard drives failing at the same time.

2. During the Hard drive Failure

When one of the two hard drives fails in the SR2611 system, the system will alarm the

hard drive failure message both on the LCD display screen and in the monitoring

software. The user can remove the failed hard drive from the system while the system

is still in operation without shutting down the machine. If the failed hard drive is replaced

shortly, the system will automatically execute the Auto Rebuilding function without

affecting the system operation and without any operation command from the user.

3. The LCD Display Message During Hot Swap and Auto Rebuilding

When the SR2611 detects a hard drive missing or a hard drive failure, the Buzzer will go

off and the LCD display screen will display the following messages:

Hard Disk status on LCD screen 9

4. After removing the failed hard drive and replacing with a new hard drive, if the hard drive

is properly installed, the LCD display screen will display the following messages:

5. After few seconds of installing the new hard drive, the LCD display screen will display the

data rebuilding progress:

Pri->Sec represents that the data in the original hard drive (primary hard drive) is copied

to the new hard drive (secondary hard drive). XXX % represents the rebuilding completion

percentage.

6. When the rebuilding is fully completed, the LCD display screen will again display the

following messages:

7. When SR2611 is overheating, “T” will be displayed on the lower right-hand corner of

screen (As shown in illustration)

8. When cooling fan module is not functional, “F” will be displayed on the upper right-hand

corner of screen. (As shown in illustration)

10 Hard Disk status on LCD screen

Altri manuali per SR2611-2S-S2+

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Raidon Magazzinaggio

Raidon

Raidon SR2611-2S-S2+ Manuale utente

Raidon

Raidon iR2777-S3 Manuale utente

Raidon

Raidon SafeTANK GR8680-TB3 Manuale utente

Raidon

Raidon safetank GR4670-WSB3 Manuale utente

Raidon

Raidon SafeTANK GR5630-SB3+ Manuale utente

Raidon

Raidon SAFETANK GT4670-TB Manuale utente

Raidon

Raidon SafeTANK GR3660 Series Manuale utente

Raidon

Raidon SL3610-2S-LB2 Manuale utente

Raidon

Raidon InTANK iR2623-S3 Manuale utente

Raidon

Raidon GT8670-TB3 Manuale utente

Raidon

Raidon SafeTANK GR3660-B3 Manuale utente

Raidon

Raidon iR2620-2S-S2 Manuale utente

Raidon

Raidon GT8670-TB3 Manuale utente

Raidon

Raidon intank ir2622 Manuale utente

Raidon

Raidon SafeTANK GR5640-SB31+ Manuale utente

Raidon

Raidon SOHORAID Series SR3500 Manuale utente

Raidon

Raidon InTANK iR2024 Manuale utente

Raidon

Raidon InTANK iR2022 Manuale utente

Raidon

Raidon SR6600 Series Manuale utente

Raidon

Raidon InTANK iR2771-S3 Manuale utente

Raidon

Raidon SafeTANK GR3680 Series Manuale utente

Raidon

Raidon SafeTANK GR5630-SB3+ Manuale utente

Raidon

Raidon InTANK iR2823 Istruzioni operative originali

Raidon

Raidon InTANK iR2023 Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente