Rapid Packaging Eagle R2B2 Manuale utente
- 1 -
Operations Manual
Eagle R2B2 Stretch Wrapper
READ ALL INSTRUCTIONS CONTAINED IN THIS
MANUAL PRIOR TO MACHINE INSTALLATION!
Rapid Packaging, Inc.
763-404-8900 | [email protected]
www.RapidPackaging.com
- 2 -
Contents
page
1. General Information
1.1 Installation Notes 2
1.2 Operational Notes 2
2. Specifications
2.1 Specifications Table 3
2.2 Machine Dimensions 3
2.3 Machine Description 4
3. Operation
3.1 Initial Setup 5
3.2 Control Panel 10
3.3 HMI Screens 12
3.4 Manual Controls 15
3.5 Film Carriage 16
4. Electrical System
4.1 Operational Power Consumption / Charging 18
4.2 Electrical Diagrams 19
4.3 Electrical Parts List 21
4.4 Electrical Schematics 23
5. Maintenance & Troubleshooting
5.1 General Maintenance 33
5.2 Troubleshooting 35
5.3 Alarm Codes 36
6. Illustrations & Parts List
6.1 Control Lever 38
6.2 Body 40
6.3 Mast 43
6.4 Carriage 45
- 3 -
1.1 Installation Notes
To ensure safe operation, please ensure the following;
Only use batteries with ratings that meet or exceed the power requirements of the machine.
Battery charging requires 110V/220VAC (+/- 10%) at 50/60Hz (+/- 2%)
Operating temperature range is 32ºF to 104ºF (0ºC to 40ºC)
Operate the machine on a solid, flat surface.
1.2 Operational Notes
Read operational manual fully before operating machine.
Ensure the battery is properly charged prior to operating the machine.
Do not place objects on the film carriage unit.
Avoid operating the machine in damp or wet environments.
Do not stand in between machine and item to be wrapped. (See Fig. 1-1)
Fig. 1-1
51.2” (1,300cm)
51.2” (1,300cm)
- 4 -
2.1 Specifications Table
Power Supply (for charging)
110VAC/220VAC, 50/60Hz
Speed
3.35mph (5.4kph)
Max. Pallet Size (W x L)
∞ x ∞ (Infinite)
Min. Pallet Size (W x L)
23.6in x 23.6in (600mm x 600mm)
Max. Wrapping Height
94.5in (2,400mm)
Film Stretch
300% and 200%
Film Tension
Adjustable
Carriage Travel Speed
Adjustable
Max. Film Dimension (Dia. x Height)
⌀9.84in x 19.69in (⌀250mm x 500mm)
Machine Dimensions
62.32in x 48.54in x 109.06in
(1,583mm x 1,233mm x 2,770mm)
Machine Weight (Net)
903.9lb (410kg)
2.2 Machine Dimensions
62.32” (1,583cm)
48.54” (1,233cm)
109.06” (2,770cm)
- 5 -
2.3 Machine Description
Warning Lamp
Film
Carriage
Machine Body
Control Panel
Mast
Steering Arm
Electronics/Battery Cover
Safety Bumper
Sensing Wheel
- 6 -
3.1 Initial Setup
Step #1
Using the eyelet at the top of the R2B2 mast, attach a chain to assist with placing the mast upright.
Do not lift the mast during this step!
Step #2
Remove the side brackets (x2).
- 7 -
3.1 Initial Setup
Step #3
Raise the mast.
Step #4
Secure the mast using four M8 screws.
Note: It is recommended that a thread locking compound such as Loctite be used on the mast
screws.
Step #5
Install and affix the carriage to the mast.
Note: It is recommended that a thread locking compound such as Loctite be used on the carriage
screws.
- 8 -
- 9 -
3.1 Initial Setup
Step #6
Connect the carriage wire cables (x2) after securing the carriage to the mast.
Step #7
Once machine setup is complete, open the cabinet cover and connect the battery cable.
- 10 -
3.1 Initial Setup
Step #8
Move the steering arm to the right side and install the tension spring.
Step #9
The R2B2 equipment setup is now complete.
Before running the machine for the first time, the batteries must be charged a minimum of 8 hours.
Indice
Altri manuali Rapid Packaging Sistema di avvolgimento con pellicola estensibile
