RCA RPJ402 Manuale utente
This product has been manufactured and sold under the responsibility
of Curtis International Ltd.
RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are
registered trademarks or trademarks of Technicolor (S.A.) or its
affiliates and are used under license by Curtis International Ltd.
Any other product, service, company, trade or product name and logo
referenced herein are neither endorsed nor sponsored by
Technicolor (S.A.) or its Affiliates.
Fix the handle on the unit
Take out the handle tape, and fasten on the button on each side of unit.
plugged in the DC jack to this unit, the indicator light 2:
Red. ( When this red LED is on that means it's charging
for the internal battery. When the battery is full, the red
LED will turn to green. when it is in the state of low
power, the LED light 3 will turn Blue .And please
charge the unit immediately when blue LED light on.(If
used at home, it is recommended to plug in the power
adapter). Indicator light 1: Green.
The projector turned on and the screen will be on after
5 seconds.
Please make sure that battery is fully charged before use
this battery playback. Normally it needs to charge over 5
hours in the off mode.
LED light 3
LED light 2
Path 2: Press 'Menu' key from the remote or the unit to select 'Option'
LED light 1
LED light 3
LED light 2
MEDIA PLAYER
Indice
Altri manuali RCA Proiettore
RCA
RCA RPJ133-B Manuale utente
RCA
RCA RPJ300 COMBO-BLK Manuale utente
RCA
RCA RPJ133_24DISP Manuale utente
RCA
RCA RPJ240-COMBO-VOUCHER Manuale utente
RCA
RCA RPJ106 Manuale utente
RCA
RCA RPJ143-50DISP Manuale utente
RCA
RCA RPJ129 Manuale utente
RCA
RCA RPJ135 Manuale utente
RCA
RCA RPJ275 Manuale utente
RCA
RCA RPJ104 Manuale utente
