REALINN RL1100L Manuale utente
REALINN RL1100L
Wired Barcode Scanner
User Manual
Service Mailbox：
server@realinn.cn
V1
In order to correctly use the bar code scanner, please read the instruction carefully and
do not arbitrarily scan the settings code otherwise some settings may not be available
temporarily.
Please keep this instruction for reference.
If you have any question or concern about the operation of the scanner, please contact
us at following Email:
You are suggested to write down the model & the specific scenario and consult the
maintenance person should you find the scanner abnormal.
1
Contents
Technical Parameter
2
Packing list
3
FAQs
3
Troubleshooting
6
Optional Function settings
7
1. Restore Factory Setting
7
2. Scanning Mode Setting
7
3. End Character Setting
8
4. Beep setting
8
5. Case Sensitivity Setting
9
6. All Barcode Type Setting
9
7. Interface Setting
10
8. Keyboard Language Setting
11
9. Barcode Type ID Setting
12
10. Barcode Setting
13
11. Add/Delete Character
18
ASCII Table
21
2
Technical Parameter
Model
RL1100L
Scanning type
Bi-directional
Scanning mode
manual trigger mode/continuous scanning mode
Operating Current
40ma(operation mode); 28ma(standby mode)
Indication
Buzzer & LED
Printing Contract
≥25%
Light source
650 nm visual laser diode
Temperature
Working : -20℃-50℃ Storage: -40℃-60℃
Depth of Field
4 mil
2mm-85mm
10mil
2mm-320mm
15.6mil
5mm-580mm
35mil
10mm-900mm
CPU
ARM 32-bit Cortex
Bit Error rate
1/5millon
Scanning width
5-30cm
Decoding speed
300scans/sec
Scanning angle
rotor angel±30°,inclination± 55°,declination ± 60°
Drop test
1.8m
Certificate
CE，FCC，RoHS ，IP54
Life
Button life 5000,000 times ; laser life:12000 hours
Applicable 1D barcode
UPC/EAN, with complementary UPC/EAN, Code128,
Code 39, Code 39 Full ASCII,
Coda bar,industrial/Interleaved2 of 5,
Code93,MSI,Code11, ISBN, ISSN, etc
3
Packing List
Barcode scanner *1
User manual *1
Feature:
This is a wired scanner,plug and play,no driver needed.
FAQ
Q1: If i scan a product barcode, will it include the name of the product in the file
automatically?
Answer：
The scanner works like a keyboard. The scanner does not interpret what the barcode is,
it just "types" out a string of alphabet numeric characters that the barcode represents.
it's up to the database software you are using to interpret what that string of characters
means. Once you acquire the barcodes, you have to correlate them to something more
meaningful by either purchasing a software service that will interpret the barcode and
relate it to a product, or you can use your own internal inventory system to assign the
barcodes to specific products.
After creating the relationship between your barcode and the corresponded
information ,when you enter the barcode into the software by the scanner,your
software will look up the barcode and then output the related information of your
product.
Q2: Why can’t the scanner read the barcodes?
Answer:
Some barcode types are not commonly used so the setting is off by default.You need
4
to activate a specific barcode type to get it to work .
If you don't know the exact type of barcode that you are referring to, please contact
to solve the problem.
1） A good quality picture of your barcode
2） The P/N of the scanner you have
Q3: Why does scanner can not read the barcode correctly. When I use the scanner
to read a barcode from the label, I get a different result from what it printed on the
label.
E.g 1. When I use the scanner to read a UPCE barcode “08960007” , scanning result
is 8960007. The first digit is missing.
Solution: To set the scanner to read the first digit of UPCE , please read the “UPCE
System Digit-on”code on page 14.
E.g 2. There are two separate barcodes together. It scanned the first 12 digits in the
barcode but not the last five.
Solution: To set the scanner to read the extra code of UPCA, please scan the
code”UPCA 5 Extra Code-on”on page 13.
E.g 3. The original barcode is“abc12345”，the scanning result is “+A+B+C+D12348”，
the scanner put “+” between character.
Solution: The scanner was set to not read the Code 39 Full ASCll code by default.
To set the scanner to read Code 39 Full ASCll code ， please scan the code"Full
ASCII-on”on page 16.
E.g 4. The original UPCE barcoe is “01234565”, but the program ask for filling in 12
digits on the cell.
Solution: Please scan the setting code “UPCE to UPCA-On”on page 14.
5
If none of above situations is your query, please send us a clear picture of the barcode
and the result you get, our customer service will help you to solve the problem.
Q4. Is there any barcodes to remove auto-enter after every scanning?
Answer:
To remove the auto-enter, please read the setting code “Disable suffix”on page 8.
Q5. How to add “TAB”?
Answer:
To set up the scanner to add “Tab”, please read the setting code “Tab”on page 8.
Q6. How to restore the scanner ?
Answer:
To restore the scanner , please read the setting code “ restore default “on page 7.
6
Troubleshooting
Problem
Possible Reason
Solution
After inserted the USB
cable into the USB
port,the indication light
doesn’t flash and
without a beep.
The PC’s USB port is out
of condition.
Connect the USB receiver
to another USB port or try
to connect to other
computers.
The USB cable or the
scanner is out of
condition.
Press the trigger, the
scanner has no reaction.
The red laser light does
not show up or become a
dot.
The laser head is out of
condition.
The connection is
well,the laser light flashes
and scanner beeps. But
the barcode can not be
uploaded to computer.
The scanner was set to
USB virtual com.
Scan“restore
default”code on page 7.
7
Optional Function Setting
This Wired scanner is plug and play.
1. Restore Factory Setting
** Scan following setup code, the scanner will will return to factory condition.
Restore default
2. Scanning Mode Setting
2.1. Manual Trigger mode (default):
Pressing the trigger, the red laser light will shows up and reads the barcode. When
release the trigger , the red laser light will does off.
** Scan the following code to set the scanner to Manual trigger mode.
Manual trigger mode
2.2. Continuous Scanning Mode
There is no need to press the trigger in this mode. When read a barcode successfully,
the laser light will disappear a second and then the laser light will comes up again , and
ready to read another barcode.
** Scan the following code to set the scanner to Continuous Scanning Mode.
Continuous Scanning mode
8
3. End Character Setting
By default, the scanner does a carriage return after scanning a barcode ( the same as
pressing the “enter”key on the keyboard )
4. Beep setting
** scan one of the following barcode to select the decoding beep mode.
Note：If the scanner is on beep off and you want the scanner beeps on high tone-high
volume(for example), please scan the setting code “Beep-on “first.
CR
LF + CR
Tab
Disable suffix
Beep - on
Beep - off
High Tone -High volume
High Tone-Low volume
Medium Tone-High volume
Medium Tone-Low volume
Indice
Altri manuali REALINN Lettore di codici a barre
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
