RedBack Lasers PRO5 Manuale utente
CONTENTS
User Safety 2
Introduction and PRO5™ Accessories 3
PRO5™Diagram 4
Operating Instructions 5
Batteries 5
Power and turning On 6
Magnetic Base 7
Applications 8
Calibration Self Check & Technical Specications 9
Care & Maintenance, Trouble Shooting 10
Warranty 12
User Safety
• Laser output sign lies near the output aperture.
• Do not stare directly into laser beam.
• Do not disassemble the instrument or attempt to
perform any internal servicing. Repairs and service
should be performed only authorised service
centres of Redback Lasers.
• This instrument complies with the safety
Classication standards of laser radiation.
2
CAUTION: Class II laser <1mW at 635nm.
Do NOT stare into laser beam or aim at
another person.
Follow relevant Australian Standards
Copyright © CMI LasersTM RedBack lasersTM and Level1LasersTM . All rights reserved CMI Industries Pty Ltd 2010
No artwork or photographs produced by CMI Industries Pty Ltd may be used copied or reproduced without the written consent
from CMI Industries Pty Ltd
3
PRO5TM INTRODUCTION
Congratulations on purchasing the PRO5™ ve way dot laser level with
plumb up, down and three 3 horizontal dots at 90 degrees.
The PRO5™ features 4 separate laser diodes which provide clear and bright
dots visible indoors up to 30m or more.
The PRO5™ is automatic levelling and features a secure pendulum lock to
prevent accidental damage when not in use.
The PRO5™ is ideal for all types of indoor installation work whether its
electricians transcribing points from oor to ceiling, air conditioning
installers, windows and garage doors. In fact this 5 way dot laser can just
about do anything indoors, whether you want to plumb, level or square.
Other features of the PRO5™ include a sturdy magnetic base, 360orotation
around its plumb axis and Std “AA” Size battery operation. The PRO5TM also
boasts an industry leading Two Year Redback Warranty. (See page 12)
www.redbacklasers.com.au
PRO5™ Included Accessories
• PRO5™ Laser Unit
• Protective Carry Case
• Standard “AA” Batteries
• Magnetic Base
• Attachment Straps
• Magnetised Target
• Glasses to Assist Viewing of Laser
• Instruction Manual
4
PRO5TM DIAGRAMS
PRO5TM Laser Unit
1
3
5
7
1. Laser Output Windows
2. Heavy Duty Rubberised Casing
3. Power LED
4. Pendulum Lock & Power On/Off
5. Magnetic Base
6. Battery Compartment
7. Base Locking Screw
8. Attachment Strap Slots
2
4
6
Strong Magnets
Base Slide Out Point
8
Magnetic Base
5/8” – 11tpi Screw
1
1
8
5
www.redbacklasers.com.au
PRO5TM OPERATING INSTRUCTIONS
Battery Instructions
When the power LED next to the pendulum locking knob ashes, the batteries
need replacing. Note if you plan not to use the laser level for a while remove
batteries to prevent any possible damage caused by leaking batteries.
The PRO5 operates on 3 x standard “AA” batteries, simply lever open the
battery compartment where indicated and insert batteries in the direction
shown.
6www.redbacklasers.com.au
PRO5TM OPERATING INSTRUCTIONS
Turning Laser On (Horizontal Operation)
The PRO5TM is turned on by rotating the pendulum lock clockwise to the
“ON” position at which point the 5 laser dots and power LED all turn on
simultaneously.
If the 5 laser dots ash together with a loud beeping sound then the PRO5TM
is out of self levelling range and the laser housing needs to be set up more
level until it is in self levelling range.
The pendulum lock helps protect the laser level when not in use, always
store your PRO5TM with the knob in the “OFF” position.
7
www.redbacklasers.com.au
Magnetic Base Operation
The PRO5TM can be used either on its own or attached to the magnetic base,
the “Base Locking Screw” secures the magnetic base onto the PRO5TM.
The magnetic base has two positions; rst with the laser plumb dot located
within the inner cut out circle of the base and secondly with the PRO5TM slid
out so the plumb dot is located in the cut out “V” on the front of the base.
The Magnetic base can be mounted on any horizontal or vertical steel
surface, it can also be mounted onto a standard survey style indoor tripod
with 5/8” 11tpi thread. The PRO5TM kit also comes with a strap than can be
threaded through the base and around non magnetic surfaces such as plastic
pipe or wood studs.
8www.redbacklasers.com.au
PRO5TM OPERATING INSTRUCTIONS
Applications
The PRO5TM can be used for just about any indoor applications weather you
need to plumb up or down, level or square this laser can do it. The PRO5TM
can even be useful outdoors as long as the conditions are not too bright.
9
www.redbacklasers.com.au
PRO5TM TECHNICAL SPECIFICATIONS
Laser Wavelength 635nm <1mW
Laser Class II
Range light depending 30m Radius Indoors
Accuracy ±4mm/20m
Self Levelling Range ±4.5o
Temperature Range -10oC - +40oC
IP Dust Water Resistance IP42
Power 3 x “AA” Alkaline
Low Power Power LED Flash
Size 104x100x72mm
Weight 0.5Kg
Technical Specications
Calibration & Self Check
All Redback Lasers have been checked for calibration and certied by one
of our technicians here in Australia prior to despatch and should under
normal conditions not go out of calibration. A calibration certied sticker
with the date and name of technician is located on the laser itself. It is
worth checking calibration from time to time particularly after any known
knocks or drops. An easy way to continually check calibration is to always
double check you work with the laser located in a different position or use
an alternate vertical line. Various other methods for checking calibration can
be found at www.redbacklasers.com.au/downloads or the laser can
be returned to our service department for checking and re-calibration. We
at Redback Lasers provide a once off free calibration and check within the
duration of the warranty period see page 12 for details.
10
PRO5TM TROUBLE SHOOTING
• Keep laser and accessories stored in protective case.
• Make sure laser is stored dry, dry out before storage to prevent damage.
• Remove batteries when not used for an extended period of time to prevent
leakage.
• The PRO5TM is a precision instrument and should not be subjected to excessive
knocks, drops or vibrations.
• Self check calibration from time to time. See page 9
• For service contact Redback Lasers. www.redbacklasers.com.au
Q.
I hear a continuous beeping when turned on!
A. This is the out of level alarm indicating that the PRO5TM is
outside of self levelling range, re level the laser housing and try
again.
Q.
The Laser does not power up!
A. Check the pendulum lock has been unlocked, rotated
into the “ON” position.
Q. The Laser does not power up!
A. Check the batteries are charged and connected correctly and
replace standard “AA” size Alkaline batteries if necessary.
www.redbacklasers.com.au
Care & Maintenance
Trouble Shooting - FAQ
Indice
Altri manuali RedBack Lasers Livello laser
RedBack Lasers
RedBack Lasers BASIC614 Manuale utente
RedBack Lasers
RedBack Lasers 3L360 Series Manuale utente
RedBack Lasers
RedBack Lasers XLG44 Manuale utente
RedBack Lasers
RedBack Lasers Unilevel UNG6631 Manuale utente
RedBack Lasers
RedBack Lasers 3D3XR Manuale utente
RedBack Lasers
RedBack Lasers Unilevel UNL59 Manuale utente
RedBack Lasers
RedBack Lasers ARL516G Manuale utente
RedBack Lasers
RedBack Lasers AT1 Manuale utente
RedBack Lasers
RedBack Lasers LSR Series Manuale utente
RedBack Lasers
RedBack Lasers EL614 Manuale utente
