Reebok Rel 8 Manuale utente

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

Model No. RBEL12900

Serial No.

Serial Number

Decal

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing parts, we will guarantee

complete satisfaction through

direct assistance from our factory.

TO AVOID UNNECESSARY

DELAYS, PLEASE CALL DIRECT

TO OUR TOLL-FREE CUSTOMER

HOT LINE. The trained techni-

cians on our customer hot line

will provide immediate assis-

tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.–Fri., 6 a.m.–6 p.m. MST

Visit our website at

www.workoutwarehouse.com

new products, prizes,

fitness tips, and much more!

USER’S MANUAL

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO USE THE ELLIPTICAL CROSSTRAINER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

REEBOK and the Vector Logo are registered trademarks and service marks of REEBOK. This product is

manufactured and distributed under license from REEBOK International.

IMPORTANT PRECAUTIONS

WARNING:To reduce the risk of serious injury, read the following important precau-

tions before using the elliptical crosstrainer.

1. Read all instructions in this manual before

using the elliptical crosstrainer.

2. It is the responsibility of the owner to ensure

that all users of the elliptical crosstrainer

are adequately informed of all precautions.

3. Place the elliptical crosstrainer on a level

surface, with a mat beneath it to protect the

floor or carpet. Keep the elliptical crosstrain-

er indoors, away from moisture and dust.

4. Inspect and tighten all parts regularly.

Replace any worn parts immediately.

5. Keep children under the age of 12 and pets

away from the elliptical crosstrainer at all

times.

6. The elliptical crosstrainer should not be used

by persons weighing more than 250 pounds.

7. Always hold the pulse handlebar or the upper

body arms when mounting, dismounting, or

using the elliptical crosstrainer.

8. Wear appropriate exercise clothing when

using the elliptical crosstrainer. Always wear

athletic shoes for foot protection.

9. The pulse sensor is not a medical device.

Various factors may affect the accuracy of

heart rate readings. The pulse sensor is

intended only as an exercise aid in determin-

ing heart rate trends in general.

10. When you stop exercising, allow the pedals

to slowly come to a stop.

11. Keep your back straight when using the ellip-

tical crosstrainer; do not arch your back.

12. If you feel pain or dizziness at any time

while exercising, stop immediately and

begin cooling down.

13. The elliptical crosstrainer is intended for

in-home use only. Do not use the elliptical

crosstrainer in a commercial, rental, or insti-

tutional setting.

14. The decal shown below has been placed on

the elliptical crosstrainer. If the decal is

missing or illegible, please call our Customer

Service Department toll-free at 1-800-999-

3756 to order a free replacement decal.

Apply the decal in the location shown.

WARNING:Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health prob-

lems. Read all instructions before using. ICON assumes no responsibility for personal injury or

property damage sustained by or through the use of this product.

BEFORE YOU BEGIN

Congratulations for selecting the new Reebok®REL8

elliptical crosstrainer. The Reebok®REL8 is an incred-

ibly smooth exerciser that moves your feet in a natural

elliptical path, minimizing the impact on your knees

and ankles. And the unique Reebok®REL8 features

adjustable resistance and incline to help you get the

most from your exercise. Welcome to a whole new

world of natural, elliptical-motion exercise from

Reebok.

For your benefit, read this manual carefully before

you use the elliptical crosstrainer. If you have addi-

tional questions, please call our Customer Service

Department toll-free at 1-800-999-3756, Monday

through Friday, 6 a.m. until 6 p.m. Mountain Time

(excluding holidays). To help us assist you, please

note the product model number and serial number

before calling. The model number is RBEL12900. The

serial number can be found on a decal attached to the

elliptical crosstrainer (see the front cover of this man-

ual for the location of the decal).

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

Pulse Handlebar

Upper Body Arm

FRONT

BACK

RIGHT SIDE

Pedal Arm

Pedal Disk

Wheel

Pedal

Console

Book Rack

Incline Ramp

ASSEMBLY

Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the

packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included allen wrenches, assembly requires a phillips screwdriver , an adjustable

wrench , and a rubber mallet .

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly.

The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on

page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been

pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

Rear Stabilizer Bolt (60)–2

Plastic Pedal

Spacer (85)–2

Front Stabilizer Bolt (86)–2

3/4” Axle Cap (61)–2

56mm Spacer (22)–2

M10 Nylon

Locknut (26)–6

Pedal Screw (43)–6 Incline Axle

Screw (30)–4 Console Screw (35)–4 M10 x 25mm Screw (100)–3

Chrome Tube

Washer (44)–2

M8 Washer (33)–4M8 Split

Washer (58)–4 M10 Split

Washer (13)–3

1. Identify the Rear Stabilizer (59), which has Wheels (45)

attached to it.

Attach the Rear Stabilizer (59) to the rear of the Frame

(1) with the two Rear Stabilizer Bolts (60) and two M10

Nylon Locknuts (26). Make sure that the Rear

Stabilizer is turned so the Wheels (45) are not

touching the floor.

26 59

2. Attach the Front Stabilizer (14) to the front of the

Frame (1) with the two Front Stabilizer Bolts (86) and

two M10 Nylon Locknuts (26).

4. Slide an M8 Split Washer (58) and an M8 Washer (33)

onto an Incline Axle Screw (30). Tighten the Incline Axle

Screw into one end of the other Incline Axle (29). Next,

apply a small amount of grease to the Incline Axle.

Raise the Incline Ramp (5). Insert the Incline Axle (29)

through one side of the Incline Ramp, through a 56mm

Spacer (22), through the end of the motor screw,

through another 56mm Spacer (22), and then through

the other side of the Incline Ramp.

Slide an M8 Split Washer (58) and an M8 Washer (33)

onto another Incline Axle Screw (30). Tighten the Incline

Axle Screw into the open end of the Incline Axle (29).

86 14

V-shaped Groove

Grease

Tubes

3. Slide an M8 Split Washer (58) and an M8 Washer (33)

onto an Incline Axle Screw (30). Tighten the Incline

Axle Screw into one end of an Incline Axle (29). Next,

apply a small amount of the included grease to the

Incline Axle.

Align the indicated tubes on the Incline Ramp (5) with

the tubes on the Base (1). Make sure that the Incline

Ramp is turned so the V-shaped grooves are on

top. Insert the Incline Axle (29) through the Incline

Ramp and the Base. Note: It may be helpful to tap the

Incline Axle with a rubber mallet to insert it.

Slide an M8 Split Washer (58) and an M8 Washer (33)

onto another Incline Axle Screw (30). Tighten the

Incline Axle Screw into the open end of the Incline Axle

(29).

Grease

Motor

Screw

7. Apply grease to the welded bolt on the Left Pedal Arm

(3). Slide a Chrome Tube (98) and a Chrome Tube

Washer (44) onto the welded bolt. Make sure that the

Chrome Tube is turned exactly as shown in the

inset drawing. Then, tighten an M10 Nylon Locknut

(26) onto the welded bolt.

Attach the other Chrome Tube (not shown) to the Right

Pedal Arm (4) in the same way.

Apply a small amount of the included Teflon®lubricant

to a paper towel. Rub a thin film of the lubricant onto

both Chrome Tubes (98).

8. While another person holds the Upright (2) near the

Frame (1), connect the Wire Harness (25) to the

Extension Harness (99). Next, attach the Upright to the

Frame with three M10 x 25mm Screws (100) and three

M10 Split Washers (13). Be careful to avoid pinching

the wires.

Wide

Side Narrow

Side

Welded Bolt

Grease

Lubricate

5. Identify the Left Pedal Arm (3), which has an “L” sticker

attached to it. Next, identify the Left Pedal (41), which

has the letter “L” molded onto the bottom.

Turn over the Left Pedal Arm (3) as shown. Insert the

three plastic posts on the Left Pedal (41) into the three

indicated holes in the Left Pedal Arm. Make sure that

the Left Pedal is turned as shown. Attach the Left

Pedal with three Pedal Screws (43).

Attach the Right Pedal (not shown) to the Right Pedal

Arm (not shown) in the same way.

543

Open Side

Plastic Posts

6. Apply a small amount of grease to the axle on the left

Crank Arm (6).

Slide a Plastic Pedal Spacer (85) and the Left Pedal

Arm (3) onto the axle on the left Crank Arm (6). Note: It

may be helpful to use a rubber mallet to tap these parts

on. Be careful not to confuse the Left Pedal Arm

with the Right Pedal Arm (not shown); look at the

position of the round tube to correctly identify the

Left Pedal Arm. Next, tap a 3/4” Axle Cap (61) onto

the axle.

Attach the Right Pedal Arm (not shown) in the same way.

Grease

Round

Tube

100

11. Make sure that all parts of the elliptical crosstrainer are properly tightened. Note: Some hardware

may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat

under the elliptical crosstrainer.

10.Slide the Left Upper Body Arm (15), which is marked

with an “L” sticker, onto the Chrome Tube (98) on the

Left Pedal Arm (3). Slide the Right Upper Body Arm

(18) onto the Chrome Tube on the Right Pedal Arm (4).

Make sure that the Upper Body Arms are on the

correct sides—the upper ends should bend in the

direction shown by the arrows. Next, slide an Axle

Cover (49) onto the post on each Upper Body Arm.

Apply grease to the Arm Axle (34). Insert the Arm Axle

into the Upright (2), the right Pivot Cover (49), and the

Right Upper Body Arm (18) as shown. Push the Arm

Axle into the Upright until the left end of the Axle is flush

with the left side of the Upright. Next, raise the Left

Upper Body Arm (15) and insert the Arm Axle into the

left Axle Cover (49) and the Left Upper Body Arm.

Center the Arm Axle.

Using the included pedal tool, tap two Push Nuts (94)

about 1/8” onto each end of the Arm Axle (34). Make

sure that the Push Nuts are turned as shown in the

inset drawing. Note: It may be helpful if another person

holds a block of wood against one end of the Arm Axle

while you tap Push Nuts onto the other end.

Press the two Axle Caps (51) onto the Arm Axle (34).

Post Grease

Pedal Tool 94 34

Console

Wires Ground

Wire

35 35

101

103

9. Remove the four Console Screws (35) and the four

Console Washers (101) from the Console (87).

Connect the Extension Harness (99) and the Pulse

Wires (103) to the corresponding console wires.

Attach the ground wire to the Upright (2) with an M4 x

16mm Screw (72).

Attach the Console (87) to the Upright (2) with the four

Console Screws (35) and the four Console Washers

(101) removed previously. Be careful to avoid pinch-

ing the wires.

HOW TO USE THE ELLIPTICAL CROSSTRAINER

PLUGGING IN THE POWER CORD

Locate the power cord on the elliptical crosstrainer.

Plug the power cord into a surge protector (not includ-

ed), and plug the surge protector into a 120-volt outlet.

The displays and various indicators on the console will

light and a tone will sound. To decrease the possibil-

ity of damaging the elliptical crosstrainer, always

use a surge protector.

Note: Each time the power cord is plugged in, the

incline frame will move to the lowest position. In

addition, the incline frame may automatically move

up and then down as the elliptical crosstrainer

goes through a calibration sequence. During the

calibration sequence, dashes will appear in the left

LED display and the INCLINE indicator will flash.

EXERCISING ON THE ELLIPTICAL CROSSTRAINER

To mount the elliptical crosstrainer, hold the pulse han-

dlebar and step onto the pedal that is in the lowest

position. Next, step onto the other pedal. Push the

pedals until they begin to move with a continuous

motion.

Note: The pedal disks can turn in either direction.

It is recommended that you move the pedal disks

in the direction shown by the arrow above; howev-

er, to give variety to your exercise, you may turn

the pedal disks in the opposite direction.

To dismount the elliptical crosstrainer, wait until the

pedals come to a complete stop. Note: The elliptical

crosstrainer does not have a free wheel; the ped-

als will continue to move until the flywheel stops.

When the pedals are stationary, step off the highest

pedal first. Then, step off the lowest pedal.

HOW TO USE THE UPPER BODY ARMS

The upper body arms are

designed to add upper-

body exercise to your

workouts. Move the

upper-body arms forward

and back as you exercise

in order to work your

arms, back, and shoul-

ders.

To exercise only your

lower body, hold the

pulse handlebar as you

exercise.

CAUTION:Before operating the

console, read the following precautions.

• Always hold the pulse handlebar or the upper

body arms when mounting, dismounting, or

using the elliptical crosstrainer.

• When you stop exercising, allow the pedals to

slowly come to a stop.

• Keep your feet and objects from beneath the

elliptical crosstrainer.

• To reduce the risk of electric shock, keep the

console dry.

• The pulse sensor is not a medical device.

Various factors may affect the accuracy of

heart rate readings. The pulse sensor is

intended only as an exercise aid in determin-

ing heart rate trends in general.

Pedals

Pedal Disk

Pulse Handlebar

Upper Body

Arms

Pulse

Handlebar

DESCRIPTION OF THE CONSOLE

The advanced console offers a variety of features to

help you get the most from your workouts.

When the manual mode of the console is selected, the

incline and the resistance of the elliptical crosstrainer

can be changed with a touch of a button. As you exer-

cise, the LED matrix and displays will provide continu-

ous exercise feedback. You can even measure your

heart rate using the built-in pulse sensor.

The console also offers eight certified personal trainer

programs. Each program automatically changes the

incline and the resistance of the elliptical crosstrainer

as it guides you through an effective workout.

The console also features new iFIT.com interactive

technology. IFIT.com technology is like having a per-

sonal trainer right in your home. Using the included

audio cable, you can connect the elliptical crosstrainer

to your home stereo, portable stereo, or computer and

play special iFIT.com CD programs (CD’s are available

separately). IFIT.com CD programs automatically con-

trol the incline and the resistance of the elliptical

crosstrainer as a personal trainer coaches you

through every step of your workout. High-energy

music provides added motivation. Each CD features

two programs designed by certified personal trainers.

In addition, you can connect the elliptical crosstrainer

to your VCR and TV and play iFIT.com video programs

(videocassettes are available separately). Video pro-

grams offer the same benefits as iFIT.com CD pro-

grams, but add the excitement of working out with a

class and an instructor—the hottest new trend at

health clubs.

With the elliptical crosstrainer connected to your com-

puter, you can also go to our new internet site at

www.iFIT.com and access audio programs and video

programs directly from the internet. And by adding an

optional upgrade module to the elliptical crosstrainer,

you can use virtually endless features from our inter-

net site. See www.iFIT.com for complete details.

To purchase an optional upgrade module, see

page 18. For information about the availability of

iFIT.com CD’s or videocassettes, call toll-free

1-800-884-0620.

CONSOLE DIAGRAM

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Reebok Ellittica

Reebok

Reebok 1000 ZX elliptical exerciser RBEL9906.1 Manuale utente

Reebok

Reebok RBEL68083 Manuale utente

Reebok

Reebok T 7.90 Manuale utente

Reebok

Reebok Titanium-TX1.0 Manuale utente

Reebok

Reebok RBE0995.1 Manuale utente

Reebok

Reebok JET 100 SERIES Manuale utente

Reebok

Reebok 1410 Elliptical Manuale utente

Reebok

Reebok RL 545 elliptical exerciser RBCCEL5906.0 Manuale utente

Reebok

Reebok 1000 X Elliptical Manuale utente

Reebok

Reebok Crosstrainer C 5.8e Manuale utente

Reebok

Reebok 1000 ZX RBEL9906.2 Manuale utente

Reebok

Reebok R 5.10 Elliptical Manuale utente

Reebok

Reebok R 6.90 Treadmill Manuale utente

Reebok

Reebok One GX40 Manuale utente

Reebok

Reebok RBEL68080 Manuale utente

Reebok

Reebok ZR10 Manuale utente

Reebok

Reebok Stride Select Rl 7.0 Elliptical Manuale utente

Reebok

Reebok i-Trainer.SE Manuale utente

Reebok

Reebok RL 1500 RBEL4255.0 Manuale utente

Reebok

Reebok RL 525 RBCCEL79021 Manuale utente

Reebok

Reebok JET 300 Manuale utente

Reebok

Reebok ASTRORIDE A6.0 Manuale utente

Reebok

Reebok Elliptical Exerciser/rel2i Manuale operativo e di manutenzione

Reebok

Reebok One Series Manuale utente

Manuali Ellittica popolari di altre marche

Weslo

Weslo Momentum 4.0 Elliptical Manuale operativo e di manutenzione

Progear Fitness

Progear Fitness Air elliptical pro 1307 Manuale utente

Torque Fitness

Torque Fitness XPLLP Manuale utente

Octane Fitness

Octane Fitness PRO3700C Manuale utente

Xterra

Xterra FS5.8e Manuale utente

Bodyguard

Bodyguard E-40 Manuale utente

Bonn Germany

Bonn Germany Concept 2.2 Manuale utente

Precor

Precor Resolute RSL 620 Manuale utente

NordicTrack

NordicTrack E 9.2 Elliptical Manuale utente

Vision Fitness

Vision Fitness X6600iNetTV Manuale utente

Matrix

Matrix MX-A5x Manuale utente

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Manuale utente

Sears

Sears FREE SPIRIT C249 30737 0 Manuale utente

True

True FS-64 Manuale utente

Sport-thieme

Sport-thieme ST 310 Manuale utente

VIRTUFIT

VIRTUFIT CTR 1.1 Manuale utente

Kettler

Kettler GIRO C 1 Manuale utente

CIRCLE FITNESS

CIRCLE FITNESS E7 Manuale utente