Rega P2 Manuale utente
quick start guide
English
Français
Deutsch
Español
Rega Research. Made in England
English
Please follow this quick set up guide to ensure
optimum performance and perfect operation.
Failure to do so may invalidate your warranty.
For more information on this product
please visit www.rega.co.uk
Thank you for purchasing this
Rega product.
8
3
5
2
674Platter
2Drive belt & pulley
3Tonearm
5Plinth
6Power input
7Phono output
8On/Off switch
(underneath plinth)
4Balance weight
Unpacking the Planar 2
Always keep the turntable flat.
Follow the packing guide printed inside the front of the
box.
Save the packaging in case you need to transport your
turntable in the future.
Ensure the drive belt is in place and remove the
transport hub card from beneath the sub platter.
Carefully place the glass platter on the hub and fit the
turntable mat.
Place the turntable on a rigid level surface.*
2
*The Rega
turntable wall
bracket is the
ideal solution.
Cartridge alignment protractor
The Planar 2 comes with the Rega Carbon cartridge
aligned ready for play. If you need to replace or upgrade
the cartridge please use the cartridge alignment
protractor provided along with the cartridge
manufacturers guidelines.**
Manual speed change
You can change playing speed by simply removing the
glass platter and moving the drive belt between either the
33 ⅓rpm or 45rpm wheels of the drive pulley as shown.
Any questions or doubts, please contact your nearest official Rega dealer.
The tonearm external phono leads must be connected to
a suitable phono stage.
Connect as follows: Red=right channel. Black=left channel.
If your amplifier does not have an integrated phono stage
you will require an external stage.*
Connection to the amplifier
To set up the RB220 tonearm, screw on the balance
weight (A) along its shaft (B) until the stylus is floating
1mm clear of a record on the platter. Tracking force can
now be applied, half a turn of the weight (180 degrees) = 1
gram of force. Turn the weight to the suggested force of
your cartridge manufacturer’s guidelines. The suggested
force for the supplied Carbon cartridge is 2 grams (360
degrees). Use the plastic plugs on the weight as a guide.
Bias adjustment is automatic on the RB220 tonearm.
Setting up the RB220 tonearm
*Rega
Phono stages
are sold
separately.
**Upgrade
with the Rega
performance
pack.
3
Altri manuali per P2
3
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Rega Giradischi
Rega
Rega Planar 78 Manuale utente
Rega
Rega P10 Manuale utente
Rega
Rega Planar 78 Manuale utente
Rega
Rega Planar 6 Manuale utente
Rega
Rega plus Manuale utente
Rega
Rega RP1 Manuale utente
Rega
Rega Planar 6 Manuale utente
Rega
Rega RB303 Manuale utente
Rega
Rega P9 Manuale utente
Rega
Rega P1 planar one Manuale utente
Rega
Rega PLANAR 3 50 Anniversary Edition Manuale utente
Rega
Rega planar one Manuale utente
Rega
Rega RB220 Manuale utente
Rega
Rega RB880 Manuale utente
Rega
Rega P2 Manuale utente
Rega
Rega P9 Manuale utente
Rega
Rega Planar 78 Manuale utente
Rega
Rega Planar 2 Manuale utente
Rega
Rega RP10 Manuale utente
Rega
Rega P1 PLUS Manuale utente
