Regin ADD:IO Manuale utente

WE TAKE BUILDING

AUTOMATION PERSONALLY

MANUAL

ADD:IO

Rev. F, 2023-06-26

THANK YOU FOR CHOOSING REGIN!

Ever since Regin was established in 1947, we have developed and arketed products and syste s that create good

levels of indoor co fort. Today, we are an i portant player with one of the arket's broadest ranges for building

auto ation.

Our goal is to ake real estates in the world ore energy efficient. Regin is an international group and our products

sells in over 90 countries. Thanks to our global presence with strong local representation, we are well aware of the

require ents of the arket, as well as of how our products and syste s function under the ost variable conditions.

Every year, Regin akes substantial invest ents in the develop ent of our syste s and HVAC-products.

DISCLAIMER

The infor ation in this anual has been carefully checked and is believed to be correct. Regin akes no warranties

about the contents of this anual and users are requested to report errors and discrepancies to Regin, so that

corrections ay be ade in future editions. The infor ation in this docu ent is subject to change without prior

notification.

So e product na es entioned in this docu ent are used for identification purposes only and ay be the registered

trade arks of their respective co panies.

Table of Content

1 Introduction .................................................................................................................................5

1.1 General..............................................................................................................................5

1.2 Layout ...............................................................................................................................5

1.3 Di ensions ........................................................................................................................6

1.4 Mounting ...........................................................................................................................6

1.5 Co unication..................................................................................................................6

1.6 Na ing..............................................................................................................................7

2 Deployment.................................................................................................................................8

2.1 Installation reco endations...............................................................................................8

2.2 General status indicator .......................................................................................................8

2.3 Syste addressing ...............................................................................................................9

3 Model IO-EC16UId-X................................................................................................................10

3.1 Ter inals.........................................................................................................................10

3.2 Wiring .............................................................................................................................12

4 Model IO-EC16UOb-X .............................................................................................................13

4.1 Ter inals.........................................................................................................................13

4.2 Wiring, AC.......................................................................................................................15

4.3 Wiring, DC ......................................................................................................................15

5 Model IO-EC16DOE-X .............................................................................................................16

5.1 Ter inals.........................................................................................................................16

5.2 Wiring .............................................................................................................................17

6 Model IO-EC32DIB-X ...............................................................................................................18

6.1 Ter inals.........................................................................................................................18

6.2 Wiring .............................................................................................................................20

7 Model IO-EC8UID8UOB-X ......................................................................................................21

7.1 Ter inals.........................................................................................................................21

7.2 Wiring .............................................................................................................................22

Appendix A Technical data..........................................................................................................23

A.1 General data.....................................................................................................................23

A.2 Serial port data .................................................................................................................23

A.3 Material ...........................................................................................................................23

A.4 I/O data ...........................................................................................................................24

A.5 Ter inal connectors & wire installation...............................................................................24

A.5.1 Push-in connectors...............................................................................................24

A.5.2 Table for connector type vs conductor data ............................................................25

Appendix B Model overview .......................................................................................................26

Appendix C Input and output pecification ..............................................................................27

Introduction

1 Introduction

1.1 General

The Add:io series is intended for use in co bination with EXOclever and EXOco pact to expand the

nu ber of I/Os in a syste . Each unit expands the syste with 16 I/Os. An EXOclever controller can be

expanded with unli ited I/Os and an EXOco pact with up to 50 I/Os.

The units are progra able in EXOdesigner, the sa e environ ent used for all other EXO controllers.

1.2 Layout

All available Add:io odels have a si ilar design and layout. It is shown in Figure 1-1.

Figure 1-1 Add:io layout with status indications

DO or DI indications

General status indications

Push-in terminals

Grooves for DIN-rail mounting on short- or backside

DIP-switches for system addressing

Add:io manual, Rev. F 5 (28)

Introduction

1.3 Dimen ion

[mm]

1.4 Mounting

The controllers are designed to be ounted on a DIN-rail. They can be ounted in two ways, either on their

backside or stacked on the short side with a high packing density as a result. When stacked they fit s oothly

together thus requiring ini al space (see Figure 1-2 Stacked units)

Figure 1-2 Stacked units

1.5 Communication

The EFX-port is the co unication channel used between the Add:io and a aster controller (e.g.

EXOclever). EFX is RS485-based co unication.

102

136

140

6 (28) Add:io manual, Rev. F

Introduction

1.6 Naming

All Add:io odels are na ed the following way:

IO-ECzzyyy-X IO-EC = Add:io family naming

zz = Number of IOs

yyy = IO-type, e.g. UId

-X = EFX communication

Add:io manual, Rev. F 7 (28)

Deployment

2 Deployment

2.1 In tallation recommendation

Follow these guidelines regarding shielded cables:

✓Only use shielded cables when the installation environ ent requires it.

✓No need for shielded cables between odules, if installed in close proxi ity

✓Connect shield to chassis ground at only one end of the cable.

For RS485 co unication, the ter inal Nis only required between syste s not sharing the sa e ground

potential. When used, it is not reco ended to connect it to the cable screen. Note that it ay be a single

wire, but ust be drawn together.

When the cable length is less than 30 in RS485, a ter inator is not required in nor al cases. The use of

ter inators will decrease signal integrity thus try without first. When used, atch the ter inator value to

the characteristic i pedance of the cable.

NNoottee!! For analogue input ignal , do not mix and u e one GND for everal input .

The technical earth terminal in the IO module power connector i not intended a a connection for

cable creen .

When connecting and easuring an external trans itter in an UI port this is done between ter inals UIx

and GNDx (where x is the channel nu ber between 1…16). Note that the intention is to use the

corresponding GND for the connected UI, especially when easuring sensitive signals or using DI pulse

(fast) ode.

Wiring exa ples can be found under each specific Add:io odel in the following chapters.

2.2 General tatu indicator

The Add:io has a general status indicator ounted at the iddle right front side, see Figure 1-1, which can be

inspected both when the unit is ounted on its back and side. This indicator changes colour depending on its

actual status as shown in Table 2-1.

Table 2-1 Status indication at the front

LED status Controller status

Green, solid Power on and communication is established

Red, solid Battery problem

Yellow, blink 2.5 Hz Identification (wink)

Orange, blink 1 Hz IO-board is not in contact with CPU-board (via EFX)

The status indications that are present on the side, see Figure 1-1, are only active when the universal inputs or

outputs are configured as DI and DO. The indicator colours are shown in Table 2-2.

Table 2-2 Status indications on the side

UI configuration LED colour IO status

DI Green ON

DO Yellow ON

8 (28) Add:io manual, Rev. F

Deployment

NNoottee!! The value in Table 2-2 are default configuration . The LED can al o be configured for other

indication . For example, red for a DI that i u ed for an alarm.

2.3 Sy tem addre ing

The odule has to be given an address between 2-32 in order to be able to co unicate with it in a syste .

The address is set with the 8-bit DIP-switch arked with Module Address on the Add:io unit. The least

significant bit (LSB) is arked Bit 1 and the ost significant bit (MSB) is arked Bit 8.

A switch is activated by setting it to 1. In Figure 2-1 the address is set to 3.

Figure 2-1 DIP-switches for system addressing

Bit 1

7 6 5 4 3 2

Bit 8

Add:io manual, Rev. F 9 (28)

Model IO-EC16UId-X

3 Model IO-EC16UId-X

3.1 Terminal

Terminal Label Notes

1 G+ Supply voltage

2 G0- Supply voltage, system ground (0 V)

3 Technical earth (EMI), connect to earth rail

10 N Communication port: port earth

11 A Communication port: inverted (-) data signal line

12 B Communication port: non-inverted (+) data signal line

20 GND1 Universal ground channel 1

21 UI1 Universal input channel 1

22 GND2 Universal ground channel 2

23 UI2 Universal input channel 2

24 GND3 Universal ground channel 3

25 UI3 Universal input channel 3

26 GND4 Universal ground channel 4

27 UI4 Universal input channel 4

28 GND5 Universal ground channel 5

29 UI5 Universal input channel 5

30 GND6 Universal ground channel 6

Bit 8

Bit 1

10 (28) Add:io manual, Rev. F

Altri manuali per ADD:IO

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Regin Sistema I/O

Regin

Regin ADD:IO Manuale utente

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Advantech

Advantech PCM-27J3AU Manuale di installazione e funzionamento

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

M-system

M-system R3Y-RS8 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

ABB

ABB OPT-MF-001 Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente