Reid SwiftLift Manuale utente
Rigging
OPERATION - SwiftLift™ Clutches
1. SwiftLift Clutch is attached to the
SwiftLift anchor by;
• lowering the clutch slot over
the anchor
• then rotation the clutch tab
until it rests on the concrete
surface
2. As the load is raised, the
anchor takes the full load of
tension
Rigging
OPERATION - SwiftLift™ Clutches
3. As the panel rotates to the vertical
position, the clutch comes in contact
with the concrete surface;
• this transfers the lifting force into
the concrete
• the anchor prevents the clutch from
slipping out of the void
4. Lifting away from the tab
is also safe provided the
tab does not rise more
than 30°from the
concrete surface
Rigging
Check for wear and tare - SwiftLift™ Clutches
Rigging
Effective Rigging
Using a triangular
spreader beam with
shackles and two sets of
chains will ensure legs
are equally loaded.
Using a spreader beam
with two sets of chains
will ensure the legs are
equally loaded.
Rigging
Effect of sling angle
1. The longer the slings. The lower
the load on the anchors.
•
For example, at an angle of
•
For example, at an angle of
170°the load on each sling
is six times the weight of the
actual load being lifted
2. Never make sling length shorter
than the distance between two
anchors.
3. Never set the sling up with a
greater angle than 60°.
Rigging - Configurations
Altri manuali Reid Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
