Reid boost Manuale utente
OWNER'S PACK
@REIDBIKES
BUILD ME
Pages 1-10
RIDE ME
MAINTAIN ME
APP INTEGRATION
JOIN THE COMMUNITY
ENVIRONMENTAL PLEDGE
Pages 23-30
Pages 11-22
Pages 31-34
Pages 43-48
Pages 35-42
BUILD ME
1 2
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or
metal capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
1.
2. This manual can also be downloaded from the website: www.tomoloo.com
3. WARNING: For the purposes of recharging the battery, only use the detachable supply unit (model: FY-
0634201500) provided with this appliance.
4. When product is discarded:
(1) the battery must be removed from the appliance before it is scrapped;
(2) the appliance must be disconnected from the supply mains when removing the battery;
(3) the battery is to be disposed safely
5. This appliance contains batteries that are non-replaceable.
You quickly grasp the basic operating procedures and riding methods of your Reid Boost electric
scooter.
You familiarise yourself with safe driving rules for a safe and enjoyable scooter experience.
3. You understand the composition and safety of your Reid Boost electric scooter.
This manual applies to your Reid Boost electric scooter. Please read the manual carefully to ensure that:
1.
2.
If you have any questions or need more information, please visit www.reidbikes.com
Please pay attention to the following signs and relating content:
Dangers!
Could cause serious property damage or
personal injury
Warnings!
Improper operations can lead to the
malfunction of the product
Information tips
Version Number: A01 Original Instruction
About The Manual
3 4
BUILD ME
Components
User manual x1
Screw M5 x 5
Hex wrench M5 x1, M3 x 1
M5 M3
Charger adapter x1
*Please check carefully that the parts in the package are intact.
ComponentsWhat Comes In The Box
Throttle
Front light
Folding mechanism
Front fender
Motor
Dashboard
Folding hook
Brake lever
Silicone pedal
Tail lamp
Disc brake
Charging port
Ambient light
Kickstand
5 6
BUILD ME
Installation GuideControl Panel
Power switch
Bluetooth status Headlight status
Battery
Speed gear
Speed
Maximum mileage
Cruise control
Lock
Long press the power switch button to turn on the eScooter, also turning on the front light, ambient lighting, tail light and rear
brake light. The control panel shows the power and speed.
After turn on, the control panel display shows "1", indicating that the speed is 1st gear. Press the button to display 2nd gear;
the highest is 3rd gear.
Press the button twice to turn on the front light. Press the button twice again to turn it off.
Press the button three times to display the total mileage. Pressing the button three times again will display the speed.
When using the brake, the rear brake light will get brighter.
The battery bar at the top equates to the following: Five Bars = 100%, Four Bars = 80%, Three Bars = 60%, Two Bars = 40%
and One Bar = 20 %.
Use the control panel to control the scooter, the specific features are as follows:
1.
2.
3.
4.
5.
6.
Control Instructions:
Install the brakes to the correct position with the Hex wrench (M5 in the tool bag).1.
7 8
BUILD ME
3. Fasten the scooter standpipe and fold out the kickstand.
6. After the installation is complete, switch the scooter
on and off to check that the scooter is working properly.
2. Hold the scooter upright, to ensure that the lock will not be affected, please keep the folding-spanner
(the blue part of the image) at the bottom. Pull the folding-spanner to the top, then the scooter is completely locked.
4. Install the handlebar to the standpipe.
5. Use the hex wrench in the tool bag to lock the screws
on both sides.
9 10
BUILD ME
RIDE ME
11 12
Installation Guide
Your Reid eScooter is a sporting entertainment tool that is not a vehicle. If you drive it into a public area there
are multiple safety risks not just to yourself but also to others. Strictly follow the instructions in this manual, to
protect yours and others safety and to ensure compliance with national and provincial regulations and traffic
regulations. It is important to understand that if you decide to take your Reid eScooter on a public road or other
public place, you may be exposed to the risk of unauthorised driving / improper operation of your eScooter, even
if you are in full compliance with our safe driving guide. You must strictly follow the safety requirements of this
manual where there are no national standards and regulations for electric scooters. Reid shall not be liable for
any liability, personal injury, accident, legal dispute and all other unfavourable events resulting from the use of
violating the instructions indicated in this manual.
The faster the eScooter is driving, the longer the brakes need and on some smooth surfaces, using the left-hand
brake can cause the wheels to slip and lose balance or even fall. Therefore it is important to be vigilant and
maintain the proper speed during driving, whilst maintaining a reasonable safety distance to others. Please be
vigilant and drive at low speeds before entering unfamiliar terrain.
Do not lend your Reid eScooter to a person who has never ridden it before to avoid injury. If you do lend your
eScooter to someone, be sure to be responsible for the safety of them, you should teach them how to ride and
tell them of how to ride safely, wearing the right safety gear.
Please check your Reid eScooter every time before driving. If you find that parts are loose, the battery life is
minimum, the tyre is punctured of bare tread, or there is abnormal sound or malfunction, then please stop using
it immediately and do not force it to drive.
Charging Instructions
Open the rubber cap.
Insert the charging plug.
After charging is completed, close the rubber cap to prevent water penetration.
Charging takes 5-6 hours.
Safety Instructions
13 14
RIDE ME
How To Ride
*There are risks of falling and injury when riding, so
please wear a helmet and protective gear as shown in the
picture.
Turn on the power and check the power indicatior.1. 2. One foot stands on the deck, the other foot kicks
backward.
3.Once you have the electric scooter moving above
5km, putboth feet on the deck and push the throttle to
start the electric.
4. Releasing the throttle will slow you down gradually,
with an automatic energy recover system coming in.
For hard braking pull the lever on the left side.
5. When turning, you need to lean your body slightly
towards the direction you are turning and turn the
handle slowly.
6. Keep to one speed for approximately 8 seconds
to start the cruise control. When you release the
throttle ,this then means the speed will remain
unchanged. To cancel the cruise control, push the
throttle or operate the brakes.
15 16
RIDE ME
Indice
Altri manuali Reid Scooter
