Reid E4 PLUS Manuale di istruzioni
OWNER'S PACK
@REIDBIKES
BUILD ME
Pages 1-10
MAINTAIN ME
RIDE ME
APP INTEGRATION
ENVIRONMENTAL PLEDGE
JOIN THE COMMUNITY
Pages 11-22
Pages 23-34
Pages 35-38
Pages 39-46
Pages 47-52
BUILD ME
1 2
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or metal capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.
1.
2. This manual can also be downloaded from the website: www.tomoloo.com
3. WARNING: For the purposes of recharging the battery, only use the detachable supply unit (model: FY-
4202000) provided with this appliance.
4. When product is discarded:
(1) the battery must be removed from the appliance before it is scrapped;
(2) the appliance must be disconnected from the supply mains when removing the battery;
(3) the battery is to be disposed safely
5. This appliance contains batteries that are non-replaceable
Dangers! Warnings!
BUILD ME
Please pay attention to the following signs and relating content:
Could cause serious property
damage or personal injury
Improper operations can lead to
the malfunction of the product
Information tips
Version Number: A01 Original Instruction
3 4
About The Manual
This manual applies to your Reid E4 Plus electric scooter. Please read the manual carefully to ensure that:
1. You quickly grasp the basic operating procedures and riding methods of your Reid E4 Plus electric scooter.
2, You familiarise yourself with safe driving rules for a safe and enjoyable scooter experience.
3. You understand the composition and safety of your Reid E4 Plus electric scooter.
If you have any questions or need more information, please visit www.reidbikes.com
Brake lever
Grips x2
BUILD ME
Headlight (atmosphere lights) Throttle
The Control Panel
Folding mechanism
Motor
Charging port
Buckle
Brake lights
Disc brakes
Atmosphere lights
Battery compartment
*Please check carefully that the parts in the package are intact.
User manual x1
Screw M3 x4
Hex wrench M5 x1, M3 x1, M4 x1
Charger adapter x1
Components
M5 M4 M3
5 6
What Comes In The Box Components
Long press the power switch button to turn on the eScooter, also turning on the front light, ambient deck lighting, tail light and rear brake
light. The control panel shows the power and speed.
After turn on, the control panel display shows "1", indicating power mode 1. Press the button to cycle through the power modes, there are
three power modes in total and once you have reached power mode 3, pressing the button will restart the power mode cycle at 1.
Press the button twice to turn on the front light. Press the button twice again to turn it off.
Press the button three times to display the total distance. Pressing the button three times again will display the speed.
When using the brake, the rear brake light will get brighter.
The battery bar at the top equates to the following: Five Bars = 100%, Four Bars = 75%, Three Bars = 50%, Two Bars = 25% and One Bar
= Less than 10 %.
The Scooter will power down automatically after 15 minutes without riding and operation.
1.
2.
3.
4.
5.
6.
7.
Install the handlebars, pay attention to the installation direction. Ensure the handlebars are tightened well.
Install the brakes to the correct position with the Hex .wrench (M5 in the tool bag).
BUILD ME
Control Instructions:
Power switch
Headlight status
Battery
Bluetooth status
Speed mode
Speed
78
Control Panel Installation Guide
Install the handlebar to the steerer tube. Use the hex wrench M3 in the tool bag to lock the screws M3 x4
on both sides of the steerer tube as the below picture refereed.
After the installationis completed, switch on and off to
confirm if the scooter is operable.
BUILD ME
3. Hold the eScooter upright, to ensure that the lock will not be affected. Please keep the folding wrench (blue part of the image
below) at the bottom and the folding lock (the red part of the image below) at the far right. Pull the folding wrench to the top end
and turn the folding lock to the middle, then the eScooter is completely locked.
9 10
RIDE ME
11 12
Charging Instructions
Open the rubber cap.
Insert the charging plug.
After charging is completed, close the rubber cap to prevent water penetration.
Charging takes 3-4 hours.
RIDE ME
13 14
Charging Instructions Safety Instructions
Your Reid eScooter is a sporting entertainment tool that is not a vehicle. If you drive it into a public area there are
multiple safety risks not just to yourself but also to others. Strictly follow the instructions in this manual, to protect
yours and others safety and to ensure compliance with national and provincial regulations and traffic regulations.
It is important to understand that if you decide to take your Reid eScooter on a public road or other public place,
you may be exposed to the risk of unauthorised driving / improper operation of your eScooter, even if you are in
full compliance with our safe driving guide. You must strictly follow the safety requirements of this manual where
there are no national standards and regulations for electric scooters. Reid shall not be liable for any liability,
personal injury, accident, legal dispute and all other unfavourable events resulting from the use of violating the
instructions indicated in this manual.
The faster the eScooter is driving, the longer the brakes need and on some smooth surfaces, using the left-hand
brake can cause the wheels to slip and lose balance or even fall. Therefore it is important to be vigilant and
maintain the proper speed during driving, whilst maintaining a reasonable safety distance to others. Please be
vigilant and drive at low speeds before entering unfamiliar terrain.
Do not lend your Reid eScooter to a person who has never ridden it before to avoid injury. If you do lend your
eScooter to someone, be sure to be responsible for the safety of them, you should teach them how to ride and
tell them of how to ride safely, wearing the right safety gear.
Please check your Reid eScooter every time before driving. If you find that parts are loose, the battery life is
minimum, the tire is punctured of bare tread, or there is abnormal sound or malfunction, then please stop using it
immediately and do not force it to drive.
5. To start cruise control, keep one speed for 8 seconds,
on release of the throttle the speed will stay unchanged.
To cancel cruise control, push the throttle or the brake.
6. When turning, you need to lean your body slightly
towards the direction you are turning and turn the
handle slowly.
Do not accelerate downhill.
Do not ride through
doorways.
RIDE ME
16
3.Once you have the electric scooter moving above 5km,
putboth feet on the deck and push the throttle to start
the electric.
4. Releasing the throttle will slow you down gradually,
with an automatic energy recover system coming in.
For hard braking pull the lever on the left side.
6. When turning, you need to lean your body slightly
towards the direction you are turning and turn the
handle slowly.
1
*There are risks of falling and injury when riding, so please
wear a helmet and protective gear as shown in the picture.
How To Ride
Turn on the power and check the power indicatior.1. 2. One foot stands on the deck, the other foot kicks
backward.
5. Keep to one speed for approximately 8 seconds
to start the cruise control. When you release the throttle,
this then means the speed will remain unchanged. To
cancel the cruise control, push the throttle or
operate the brakes.
15 16
Altri manuali per E4 PLUS
1
Indice
Altri manuali Reid Scooter
