– 1 –
TABLE OF CONTENTS
01.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02
2.0 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
2.1 Operating Elements
2.2 Installing And Replacing The Battery
2.3 Turning The Power On and Off
2.4 Reversing The Display
2.5 Selecting The Unit Of Measure
2.6 Zero Adjustment of the Measurng Position
3.0 Removing and Re-Mounting The Filament Guide . . . . . . . . . . . . . . . . . 06
4.0 Taking A Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
4.1 Inserting The Process Material
4.2 Measuring
4.3 Removing The Process Material
5.0 Damping Mode
5.1 Switching On The Damping Mode
5.2 Switching Off The Damping Mode
5.3 Changin the Damping Factor
6.0 Memory Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
7.0 Recalling Tension Values Stored In Memory . . . . . . . . . . . . . . . . . . . . . 14
7.1 Recalling Tension Values In Standard Mode
7.2 Recalling Tension Values In Continuous Mode
7.3 Recalling Tension Values In Limit Mode
7.4 Recalling Tension Values in Fast Mode
7.5 Clearing the Memory
7.6 Memory HOLD function
7.7 Error Messages
8.0 Static Verification of Measuring Accuracy . . . . . . . . . . . . . . . . . . . . . . . 19
9.0 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
9.1 Dynamic Calibration
9.2 Static Calibration
9.3 Error Messages
9.4 Restoring Factory Defaults
10.0 WINDOWS Terminal Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
12.0 Appendix A - Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
13.0 Appendic B - Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
15.0 Appendix C - Replacing the Rollers / Ceramic Pins . . . . . . . . . . . . . . . . 26
16.0 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
0
– 28 –
16.0 WARRANTY
ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the
original purchaser that this product is of merchantable quality and confirms in
kind and quality with the descriptions and specifications thereof. Product failure
or malfunction arising out of any defect in workmanship or material in the
product existing at the time of delivery thereof which manifests itself within one
year from the sale of such product, shall be remedied by repair or replacement of
such product, at ELECTROMATIC’s option, except where unauthorized repair,
disassembly, tampering, abuse or misapplication has taken place, as determined
by ELECTROMATIC. All returns for warranty or non-warranty repairs and/or
replacement must be authorized by ELECTROMATIC, in advance, with all
repacking and shipping expenses to the address below to be borne by the
purchaser.
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE
WARRANTY OF MERCHANTABILITY AND FITNESS FOR ANY PARTICU-
LAR PURPOSE OR APPLICATION. ELECTROMATIC SHALL NOT BE
RESPONSIBLE NOR LIABLE FOR ANY CONSEQUENTIAL DAMAGE, OF
ANY KIND OR NATURE, RESULTING FROM THE USE OF SUPPLIED
EQUIPMENT, WHETHER SUCH DAMAGE OCCURS OR IS DISCOVERED
BEFORE, UPON OR AFTER REPLACEMENT OR REPAIR, AND WHETHER
OR NOT SUCH DAMAGE IS CAUSED BY MANUFACTURER’S OR
SUPPLIER’S NEGLIGENCE WITHIN ONE YEAR FROM INVOICE DATE.
Some State jurisdictions or States do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation may not apply to
you. The duration of any implied warranty, including, without limitation, fitness
for any particular purpose and merchantability with respect to this product, is
limited to the duration of the foregoing warranty. Some states do not allow
limitations on how long an implied warranty lasts but, not withstanding, this
warranty, in the absence of such limitations, shall extend for one year from
the date of invoice.
ELECTROMATIC Equipment Co., Inc.
600 Oakland Ave. Cedarhurst, NY 11516—USA
Tel: 1-800-645-4330/ Tel: 516-295-4300/ Fax: 516-295-4399
Every precaution has been taken in the preparation of this manual. Electromatic Equipment Co., Inc.,
assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of information contained herein. Any brand or product names mentioned herein are used for
identification purposes only, and are trademarks or registered trademarks of their respective holders.
