Remote Control Systems BIK-TC2 Manuale utente

You will need a small soldering iron, resin

core solder and some heatshrink tubing to

insulate solder joints.

If you anticipate using regular twin stick

NiCd or NiMh battery packs with Tamiya

type connectors on each pack you can also

purchase the # Y-CABLE which will put 2 x

Twin Stick battery packs in series.

INSTALLATION.

1. Place the BIK-TC2 in any suitable

location such as a box car door. You can

mount with double stick tape or a good

quality silicone adhesive. Do not allow

metal objects to touch the rear of the PCB.

Damage to PCB may result.

2. Follow the wiring diagram carefully. It is

most important to get the connections

correct. Especially at the ESC.

As various brands of locos are wired

differently we cannot offer “One Size Fits

All” instructions. It is essential the loco

track pick ups be disabled otherwise throttle

output voltage will be transferred to the

track & cause all sorts of problems.

The antenna wire should be kept as high as

possible.

RCS ESC.

Y-Cable is sold

separately.

Black + Motor out

Red

- Motor out.

Black

FUSES

Two orange polyswitches.

Black

Black - Negative

Red

Red + Power IN.

7.2 volt NI-CAD

BATTERY IN TRAIL CAR

7.2 volt NI-CAD

BATTERY IN TRAIL CAR

RCS # BIK-TC2.

DIY INSTALLATION KIT FOR TRAIL CARS

Use this battery installation kit with any R/C.

It comes rated at 2 or 3 amps.

It comprises the following components:

1 x PCB with ON-OFF switch, charge jack,

polyswitch fuses, screw terminals and an

LED power ON indicator.

2 x purchase of red /black system hook up

wire.

1 x JST 2 x wire cable connector.

It is not necessary to suppress motor noise

Chg

Skt OFF - ON

2.4 Ghz

RADIO

CONTROL

PO BOX 578 CASINO, NSW 2470, AUSTRALIA

PHONE: INTERNATIONAL ++614 2902 9083

AUSTRALIA (04) 2902 9083

Web: http://www.rcs-rc.com Email: rcs@rcs-rc.com

If you anticipate using regular twin stick

NiCd or NiMh battery packs with Tamiya

type connectors on each pack you can also

purchase the # Y-CABLE which will put 2 x

Twin Stick battery packs in series.

INSTALLATION.

1. Place the BIK-TC2 in any suitable

location such as a box car door. You can

mount with double stick tape or a good

quality silicone adhesive. Do not allow

metal objects to touch the rear of the PCB.

Damage to PCB may result.

2. Follow the wiring diagram carefully.

As various brands of locos are wired

differently we cannot offer “One Size Fits

All” instructions. It is essential the loco

track pick ups be disabled otherwise throttle

output voltage will be transferred to the

track & cause all sorts of problems.

The antenna wire should be kept as high as

possible.

Y-Cable is sold

separately.

Black

FUSES

Two orange polyswitches

means a 2 amp version.

Three orange polyswitches

means a 3 amp version.

Black

Red

7.2 volt NI-CAD

BATTERY IN TRAIL CAR

PLUGS INTO THE BACK OF LOCO. ON-OFF SWITCH MUST BE ON.

7.2 volt NI-CAD

BATTERY IN TRAIL CAR

RCS # BIK-TC2.

DIY INSTALLATION KIT FOR TRAIL CARS

Use this battery installation kit with any R/C.

It comes rated at 2 or 3 amps.

It comprises the following components:

1 x PCB with ON-OFF switch, charge jack,

polyswitch fuses, screw terminals and an

LED power ON indicator.

Chg

Skt OFF - ON

2.4 Ghz

RADIO

CONTROL

Plug cover

Radio Shack #274-1573

PO BOX 578 CASINO, NSW 2470, AUSTRALIA

PHONE: INTERNATIONAL ++614 2902 9083

AUSTRALIA (04) 2902 9083 (03) 8685 8230

Web: http://www.rcs-rc.com Email: rcs@rcs-rc.com

USING AS AN AUXILIARY BATTERY SUPPLY ONLY TO LOCO.

Positive goes to the centre pin

Altri manuali Remote Control Systems Telecomando

Remote Control Systems

Remote Control Systems TITAN-TRACKSIDE-6v2-AB Manuale utente

Remote Control Systems

Remote Control Systems AB-Rx v2-EM Manuale utente

Remote Control Systems

Remote Control Systems TX-2 Manuale utente

Remote Control Systems

Remote Control Systems TX-8 Manuale utente

Remote Control Systems

Remote Control Systems TX-5vL Manuale utente

Remote Control Systems

Remote Control Systems ARGYLE C38 Manuale utente

Remote Control Systems

Remote Control Systems EVO-BASIC Manuale utente

Remote Control Systems

Remote Control Systems TX-10 Manuale utente

Remote Control Systems

Remote Control Systems EVO-BATT Manuale utente

Remote Control Systems

Remote Control Systems TITAN-TWIN TX Manuale utente

Remote Control Systems

Remote Control Systems TX-5v2 Manuale utente

Remote Control Systems

Remote Control Systems TITAN-TRACKSIDE-3 Manuale utente

Remote Control Systems

Remote Control Systems TX-7 Manuale utente

Remote Control Systems

Remote Control Systems VIPER-10 Manuale utente

Remote Control Systems

Remote Control Systems EVO-SIMPLEX Tx's Manuale utente

Remote Control Systems

Remote Control Systems TX-20+ Manuale utente

Remote Control Systems

Remote Control Systems EVO-DUPLEX+ Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione