Renesas H8S/2214 Series Manuale utente

H8S/2214 Series

TBP-112

User System Interface Cable

(HS2214ECB61H)

for E6000 Emulator

User’s Manual

HS2214ECB61HE(C)

Cautions

1. Renesas neither warrants nor grants licenses of any rights of Renesas’s or any third party’s

patent, copyright, trademark, or other intellectual property rights for information contained in

this document. Renesas bears no responsibility for problems that may arise with third party’s

rights, including intellectual propertyrights, in connection with use of the information contained

in this document.

2. Products and product specifications may be subject to change without notice. Confirm that you

have received the latest product standards or specifications before final design, purchase or use.

3. Renesas makes every attempt to ensure that its products are of high quality and reliability.

However, contact Renesas’s sales office before using the product in an application that demands

especially high quality and reliability or where its failure or malfunction may directly threaten

human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power,

combustion control, transportation, traffic, safety equipment or medical equipment for life

support.

4. Design your application so that the product is used within the ranges guaranteed by Renesas

particularly for maximum rating, operating supply voltage range, heat radiation characteristics,

installation conditions and other characteristics. Renesas bears no responsibility for failure or

damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider

normally foreseeable failure rates or failure modes in semiconductor devices and employ

systemic measures such as fail-safes, so that the equipment incorporating Renesas product does

not cause bodily injury, fire or other consequential damage due to operation of the Renesas

product.

5. This product is not designed to be radiation resistant.

6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document

without written approval from Renesas.

7. Contact Renesas’s sales office for any questions regarding this document or Renesas

semiconductor products.

Preface

Thank you for purchasing this user system interface cable (HS2214ECB61H) for the Renesas’s

original microcomputer H8S/2214series.

The HS2214ECB61H is a user system interface cable that connects an H8S/2214 series E6000

emulator (HS2214EPI61H; hereinafter referred to as the emulator) to the IC socket for a TBP-112

package for the H8S/2214 series MCU on the user system.

Contents

Section 1 Configuration....................................................................................1

Section 2 Connection Procedures......................................................................3

2.1 Connecting User System Interface Cable to Emulator Station .........................................3

2.2 Connecting User System Interface Cable to User System................................................5

2.2.1 Soldering the IC Socket.......................................................................................5

2.2.2 Inserting Cable Head ...........................................................................................8

2.2.3 Fastening Cable Head..........................................................................................9

2.2.4 Fastening Cable Body..........................................................................................11

2.3 Recommended Dimensions for User System Mount Pad.................................................12

2.4 Dimensions for User System Interface Cable Head..........................................................13

2.5 Resulting Dimensions after Connecting User System Interface Cable.............................14

Section 3 Installing the MCU to the User System.............................................15

Section 4 Verifying Operation...........................................................................17

Section 5 Notice ................................................................................................18

Section 1 Configuration

CAUTION

Use an CSPACK112A1110H01 socket (socket

(manufactured by Tokyo Eletech Corporation) for the

TBP-112 package IC socket on the user system.

Figure 1 shows the configuration of the HS2214ECB61H user system interface cable for the

TBP-112 package.

User system

IC socket

To emulator station

Cable body

Cable head

Screws (M1.6 x 8 mm)

Cover

(for fastening cable head)

Spacer

Figure 1 HS2214ECB61H User System Interface Cable

Table 1 lists the HS2214ECB61H components. Please make sure you have all of these components

when unpacking.

Table 1 HS2214ECB61H Components

No. Component Quantity Remarks

1 Cable body 1 Includes flat cable

2 Cable head 1

3 IC socket 1 For the TBP-112 package

4 Spacer 1 For installing an TBP-112 packaged MCU

5 Cover 1 For installing an TBP-112 packaged MCU

6 Screws (M1.6 x 8 mm) 4 For fastening cable head and for installing an

TBP-112 packaged MCU

7 Driver 1 Dedicated screwdriver to fasten the screws.

8 Documentation 1 User’s manual for HS2214ECB61H (this manual)

Section 2 Connection Procedures

2.1 Connecting User System Interface Cable to Emulator Station

WARNING

Observe the precautions listed below. Failure to do so

will result in a FIRE HAZARD and will damage the user

system and the emulator product or will result in

PERSONAL INJURY. The USER PROGRAM will be

LOST.

1. Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE CABLE

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are

correctly aligned.

2. The user system interface cable dedicated to the

emulator must be used.

To connect the cable body to the emulator station, follow the instructions below.

1. Make sure the user system and emulator station are turned off.

CAUTION

When connecting or removing the user system interface

cable, apply force only in the direction suitable for

connection or removal, while making sure not to bend or

twist the cable or connectors. Otherwise, the connectors

will be damaged.

2. After making sure the direction of the cable body connector is correct, firmly insert the cable

body connector into the emulator station socket (figure 2).

Figure 2 Connecting User System Interface Cable to Emulator Station

2.2 Connecting User System Interface Cable to User System

WARNING

Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE CABLE

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are correctly

aligned. Failure to do so will result in a FIRE HAZARD and

will damage the user system and the emulator product or

will result in PERSONAL INJURY. The USER PROGRAM will

be LOST.

To connect the cable head to the user system, follow the instructions below.

2.2.1 Soldering the IC Socket

Install the socket for TBP-112-packaged ICs on the user system.

(1) Gently apply solder to the BGA pads of the user system. Be careful to keep the thickness of

the solder within 100 to 150 µm. Too much solder will cause short-circuiting of the pins.

(2) The IC socket is vacuum-packed to avoid oxidization of the surfaces of the solder balls. It is

thus recommended that the IC socket be installed on the user system if you don’s install the

socket immediately after the package it comes in is opened. After the package’s seal has been

broken, store the socket in a desiccator. Do not touch the solder balls. If they are touched,

solder may not adhere to the solder surface.

The IC socket is covered by a protective cover. Socket and cover are fastened together by

four screws before the whole is vacuum packed to prevent bending of the IC socket’s pins.

To avoid the scattering (dispersal) of flux from other components to the IC socket, keep the

protective cover on the IC socket until solder reflow has been completed.

(3) Install the provided guide pins into the holes for the guide pins on the user system. Check

that the pads are correctly aligned with the IC socket.

(4) Notes on soldering the IC socket

a) The IC socket is larger than the actual IC package; therefore, refer to figure 7 for the

installation of other components.

b) Do not install components that occupy large volume close to the IC socket. Such

components will prevent the convective flow of heat during reflow.

c) Since the IC socket has a greater volume than the IC package, it is recommended that the

temperature profile under the conditions used in installation be measured by attaching a

temperature sensor to the back side of the IC socket.

d) Under the reflow conditions for soldering the IC socket, specify the actual heating to

more than 210°C for 30 to 60 seconds.

Recommended Reflow Conditions

Surface temperature of IC-socket connector

Preheating: 150 to 180°C for 180 seconds

Actual heating: To more than 210°C, for 30 to 60

seconds

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Renesas Hardware per computer

Renesas

Renesas PROM Programming Adapters PCA7438F-64A Manuale utente

Renesas

Renesas RZ/N1D Series Manuale utente

Renesas

Renesas RH850/F1KM-S4 233pin Manuale utente

Renesas

Renesas M30220TF-PRB Manuale utente

Renesas

Renesas H8/3627 Series Manuale utente

Renesas

Renesas DA16200 H/W Manuale utente

Renesas

Renesas M32173T-PTC Manuale utente

Renesas

Renesas M16C/26 Series Guida del prodotto

Renesas

Renesas HSG2004 Manuale utente

Renesas

Renesas Smart Analog IC101 Istruzioni per l'installazione e il funzionamento

Renesas

Renesas M30290T2-CPE Manuale utente

Renesas

Renesas M65881AFP Manuale utente

Renesas

Renesas F-ZTAT H8 Series Manuale utente

Renesas

Renesas Converter Board R0E53033ACFG90 Manuale utente

Renesas

Renesas M30263T-42SSB Manuale utente

Renesas

Renesas DA16200 PMOD Manuale utente

Renesas

Renesas HD49335HNP Manuale utente

Renesas

Renesas DA9213 Manuale utente

Renesas

Renesas R0E510Y16LVB00 Manuale utente

Renesas

Renesas SH7763 Manuale utente

Renesas

Renesas FP-80A Manuale utente

Renesas

Renesas SH7781 Manuale utente

Renesas

Renesas RAJ306101 Manuale utente

Renesas

Renesas Single-Chip Microcomputer M306NKT3 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente