Renesas YCONNECT-IT-TPS-1L Manuale utente

TPS-1

TPS-1 Low-cost Solution Kit - Getting Started

in Parallel IO-Mode

YCONNECT-IT-TPS-1L

R21UT0243ED0101, Rev. 1.01

October 24, 2018

User Manual

All information contained in these materials, including products and product specifications,

represents information on the product at the time of publication and is subject to change by

Renesas Electronics Corp. without notice. Please review the latest information published by

Renesas Electronics Corp. through various means, including the Renesas Technology Corp.

website (http://www.renesas.com).

www.renesas.com

R21UT0243ED0101 Rev.1.01 2

User Manual

Notice

1. All information included in this document is current as of the date this document is issued. Such

information, however, is subject to change without any prior notice. Before purchasing or using

any Renesas Electronics products listed herein, please confirm the latest product information with

a Renesas Electronics sales office. Also, please pay regular and careful attention to additional

and different information to be disclosed by Renesas Electronics such as that disclosed through

our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other

intellectual property rights of third parties by or arising from the use of Renesas Electronics

products or technical information described in this document. No license, express, implied or

otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of

Renesas Electronics or others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product,

whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only

to illustrate the operation of semiconductor products and application examples. You are fully

responsible for the incorporation of these circuits, software, and information in the design of your

equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or

third parties arising from the use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with

the applicable export control laws and regulations and follow the procedures required by such

laws and regulations. You should not use Renesas Electronics products or the technology

described in this document for any purpose relating to military applications or use by the military,

including but not limited to the development of weapons of mass destruction. Renesas

Electronics products and technology may not be used for or incorporated into any products or

systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign

laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this

document, but Renesas Electronics does not warrant that such information is error free. Renesas

Electronics assumes no liability whatsoever for any damages incurred by you resulting from

errors in or omissions from the information included herein.

7. Renesas Electronics products are classified according to the following three quality grades:

“Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas

Electronics product depends on the product’s quality grade, as indicated below. You must check

the quality grade of each Renesas Electronics product before using it in a particular application.

You may not use any Renesas Electronics product for any application categorized as “Specific”

without the prior written consent of Renesas Electronics. Further, you may not use any Renesas

Electronics product for any application for which it is not intended without the prior written consent

of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or

losses incurred by you or third parties arising from the use of any Renesas Electronics product for

an application categorized as “Specific” or for which the product is not intended where you have

failed to obtain the prior written consent of Renesas Electronics.

R21UT0243ED0101 Rev.1.01 3

User Manual

8. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly

specified in a Renesas Electronics data sheets or data books, etc.

“Standard”: Computers; office equipment; communications equipment; test and measurement

equipment; audio and visual equipment; home electronic appliances; machine

tools; personal electronic equipment; and industrial robots.

“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control

systems; anti-disaster systems; anti- crime systems; safety equipment; and

medical equipment not specifically designed for life support.

“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control

systems; medical equipment or systems for life support (e.g. artificial life support

devices or systems), surgical implantations, or healthcare intervention (e.g.

excision, etc.), and any other applications or purposes that pose a direct threat to

human life.

9. You should use the Renesas Electronics products described in this document within the range

specified by Renesas Electronics, especially with respect to the maximum rating, operating

supply voltage range, movement power voltage range, heat radiation characteristics, installation

and other product characteristics. Renesas Electronics shall have no liability for malfunctions or

damages arising out of the use of Renesas Electronics products beyond such specified ranges.

10. Although Renesas Electronics endeavors to improve the quality and reliability of its products,

semiconductor products have specific characteristics such as the occurrence of failure at a

certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products

are not subject to radiation resistance design. Please be sure to implement safety measures to

guard them against the possibility of physical injury, and injury or damage caused by fire in the

event of the failure of a Renesas Electronics product, such as safety design for hardware and

software including but not limited to redundancy, fire control and malfunction prevention,

appropriate treatment for aging degradation or any other appropriate measures. Because the

evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final

products or system manufactured by you.

11. Please contact a Renesas Electronics sales office for details as to environmental matters such as

the environmental compatibility of each Renesas Electronics product. Please use Renesas

Electronics products in compliance with all applicable laws and regulations that regulate the

inclusion or use of controlled substances, including without limitation, the EU RoHS Directive.

Renesas Electronics assumes no liability for damages or losses occurring as a result of your

noncompliance with applicable laws and regulations.

12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior

written consent of Renesas Electronics.

13. Please contact a Renesas Electronics sales office if you have any questions regarding the

information contained in this document or Renesas Electronics products, or if you have any other

inquiries.

(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics

Corporation and also includes its majority- owned subsidiaries.

(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured

by or for Renesas Electronics.

R21UT0243ED0101 Rev.1.01 4

User Manual

General Precautions in the Handling of MPU/MCU Products

The following usage notes are applicable to all MPU/MCU products from Renesas. For detailed usage

notes on the products covered by this manual, refer to the relevant sections of the manual. If the

descriptions under General Precautions in the Handling of MPU/MCU Products and in the body of the

manual differ from each other, the description in the body of the manual takes precedence.

1. Handling of Unused Pins

Handle unused pins in accord with the directions given under Handling of Unused Pins in the

manual.

The input pins of CMOS products are generally in the high-impedance state. In operation with

an unused pin in the open-circuit state, extra electromagnetic noise is induced in the vicinity of

LSI, an associated shoot-through current flows internally, and malfunctions occur due to the

false recognition of the pin state as an input signal become possible. Unused pins should be

handled as described under Handling of Unused Pins in the manual.

2. Processing at Power-on

The state of the product is undefined at the moment when power is supplied.

The states of internal circuits in the LSI are indeterminate and the states of register settings and

pins are undefined at the moment when power is supplied.

In a finished product where the reset signal is applied to the external reset pin, the states of pins

are not guaranteed from the moment when power is supplied until the reset process is

completed.

In a similar way, the states of pins in a product that is reset by an on-chip power-on reset

function are not guaranteed from the moment when power is supplied until the power reaches

the level at which resetting has been specified.

3. Prohibition of Access to Reserved Addresses

Access to reserved addresses is prohibited.

The reserved addresses are provided for the possible future expansion of functions. Do not

access these addresses; the correct operation of LSI is not guaranteed if they are accessed.

4. Clock Signals

After applying a reset, only release the reset line after the operating clock signal has become

stable. When switching the clock signal during program execution, wait until the target clock signal

has stabilized.

When the clock signal is generated with an external resonator (or from an external oscillator)

during a reset, ensure that the reset line is only released after full stabilization of the clock

signal. Moreover, when switching to a clock signal produced with an external resonator (or by

an external oscillator) while program execution is in progress, wait until the target clock signal is

stable.

5. Differences between Products

Before changing from one product to another, i.e. to one with a different part number, confirm that

the change will not lead to problems.

The characteristics of MPU/MCU in the same group but having different part numbers may differ

because of the differences in internal memory capacity and layout pattern. When changing to

products of different part numbers, implement a system-evaluation test for each of the products.

R21UT0243ED0101 Rev.1.01 5

User Manual

Regional Information

Some information contained in this document may vary from country to country. Before using any

Renesas Electronics product in your application, please contact the Renesas Electronics office in your

country to obtain a list of authorized representatives and distributors. They will verify:

•• Device availability

•• Ordering information

•• Product release schedule

•• Availability of related technical literature

•• Development environment specifications (for example, specifications for

third-party tools and components, host computers, power plugs, AC supply

voltages, and so forth)

•• Network requirements

In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary

from country to country.

Visit http://www.renesas.com

to get in contact with your regional representatives and distributors.

R21UT0243ED0101 Rev.1.01 6

User Manual

Preface

This manual is intended for users who want to understand the functions of the

concerned microcontrollers.

This manual presents the hardware manual for the concerned microcontrollers.

This system specification describes the following sections:

•Pin function

•CPU function

•Internal peripheral function

These microcontrollers may contain several instances of a dedicated module.

In general the different instances of such modules are identified by the index “n”,

where “n” counts from 0 to the number of instances minus one.

Symbols and notation are used as follows:

•Weight in data notation:

Left is high order column, right is low order

column

•Active low notation:

xxx (pin or signal name is over-scored) or

/xxx (slash before signal name) or

_xxx

•Memory map address:

High order at high stage and low order at

low stage

Additional remark or tip

Item deserving extra attention

Binary: xxxx or xxxB

Decimal: xxxx

Hexadecimal xxxxH or 0x xxxx

representing powers of 2 (address space, memory capacity):

K (kilo): 210 = 1024

M (mega): 220 = 1024² = 1,048,576

G (giga): 230 = 1024³ = 1,073,741,824

X, x = don’t care

Block diagrams do not necessarily show the exact wiring in hardware but the

functional structure. Timing diagrams are for functional explanation purposes

only, without any relevance to the real hardware implementation.

Readers

Purpose

Organisation

Module instances

Legend

Note

Caution

Numeric notation

Numeric prefixes

Diagrams

R21UT0243ED0101 Rev.1.01 7

User Manual

How to Use This Manual

(1) Purpose and Target Readers

This manual is designed to provide the user with an understanding of the set up

of the TPS-1 Solution Kit. It is intended for users evaluating the TPS-1. A basic

knowledge of electric circuits, logical circuits, and MCUs is necessary in order to

use this manual. The manual comprises a step-by-step description of the

installation and initial usage of the tools, that are included in the TPS-1 solution

kit package.

Particular attention should be paid to the precautionary notes when using the

manual. These notes occur within the body of the text, at the end of each section,

and in the Usage Notes section.

The revision history summarizes the locations of revisions and additions. It does

not list all revisions. Refer to the text of the manual for details.

The following documents apply to the TPS-1 product. Make sure to refer to the

latest versions of these documents. The newest versions of the documents listed

may be obtained from the Renesas Electronics Web site.

Document

Type

Description

Document

Title

Document No.

Data Sheet

Hardware overview

and electrical

characteristics

TPS-1

Datasheet

R19DS0069EJ0107

User’s manual

for Hardware

Hardware

specifications (pin

assignments, memory

maps, peripheral

function specifications,

electrical

characteristics, timing

charts) and operation

description.

Note: Refer to the

application notes for

details on using

peripheral functions.

TPS-1 User’s

manual for

Hardware

R19UH0081ED0107

User’s manual

for Software

Description of CPU

instruction set

TPS-1 Series

User’s

manual for

Software

not applicable

User’s manual

for development

environment

Operation instructions

for hard- and software

tools

TPS-1 Low-

cost Solution

Kit User’s

manual

Hardware

R21UT0239ED0101

Description of tool

installation and initial

set up

TPS-1 Low-

cost Solution

Kit –Getting

started

this document

R21UT0243ED0101 Rev.1.01 8

User Manual

(2) List of Abbreviations and Acronyms

Abbreviation

Full Form

Compact Disc

CPU

Central Processing Unit

MAC

Media Access Control

Personal Computer

TFTP

Trivial File Transfer Protocol

TPS-1

PROFINET I/O device chip

UART

Universal Asynchronous Receiver / Transmitter

All trademarks and registered trademarks are the property of their respective

owners.

(3) List of related Documents

Document Title

Description

R19UH0081ED0107

User Manual TPS-1 device

TPS_Update_Manual_EN.pdf 1

Application Note for TPS-1 firmware updater

PROFINET Configurator - Quick

Start Guide.pdf 1

Quick start guide for the PROFINET

Configurator tool

R21UT0239ED0101

User Manual TPS-1 Low-cost Solution Kit

R21UT0236ED0102

Getting started for TPS-1 Low-cost Solution Kit

with RX630

R21UT0237ED0102

Getting started for TPS-1 Low-cost Solution Kit

with RX231

R21UT0238ED0102

Getting started for TPS-1 Low-cost Solution Kit

with Synergy S7G2

R21UT0221ED0202

Getting started for TPS-1 Solution Kit

These file names refer to documents from Phoenix Contact Software, that are

part of the TPS-1 Development Tool kit.

Note 1:

 
R21UT0243ED0101 Rev.1.01 9 
User Manual 
Table of Contents 
Chapter 1 Introduction .......................................................................10
1.1 Software Installation .....................................................................................10 
Chapter 2 TPS-1 Set Up......................................................................11
2.1 Hardware Connections .................................................................................11 
2.1.1 Connections between PC and TPS-1 board..................................................................11 
2.1.2 Connections on the TPS-1 Adapter Board....................................................................12 
2.2 General Settings............................................................................................14 
2.3 Configuration Download to TPS-1 ...............................................................16 
2.4 Image Replacement on TPS-1 (optional).....................................................21
Chapter 3 PROFINET Configuration..................................................26
Chapter 4 Erasing the Flash Memory................................................33
 
 

TPS-1 Low-cost Solution Kit Introduction

R21UT0243ED0101 Rev.1.01 10

User Manual

Chapter 1 Introduction

This manual describes the installation and initial set up of the TPS-1 Low-cost

Solution Kit. All required steps that need to be taken to run the demonstration

program that comes with the TPS-1 Solution Kit will be described.

This manual does not replace the manuals that come together with the various

software components. These manuals are still required to study, when functions

beyond the demonstration program are needed.

Some preparations are required, before the set-up of the TPS-1 Low-cost

Solution Kit can be tackled; the preparations are

•the installation of various software programs

•the creation of a fixed directory structure

The instructions and screen shots in this manual are based on tool versions that

were up-to-date at the time when the manual was prepared. Newer versions may

exhibit slightly different behaviour. Please consider this before downloading and

installing newer versions of the TPS-1 development tool kit.

1.1 Software Installation

As a first step the following tools need to be installed from the Phoenix Contact

Software CD that comes with the TPS-1 Low-cost Solution Kit

oTPS Configurator

oTPS FW Updater

oPROFINET Configurator

oPROFINET Smart Control

The installation of these tools is basically self-explaining; for details with respect

to the installation please refer to the related software manuals.

Please be aware of starting the software tools with “Run as administrator” to run

them correctly. TPS Configurator, TPS FW Updater and PROFINET Smart

Control need access through the firewall in order to communicate to the TPS-1

via a network adapter. Therefore make sure that access through the firewall is

enabled for these programs.

Note:

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Renesas Microcontrollore

Renesas

Renesas Synergy S3A3 Manuale utente

Renesas

Renesas RX600 Series Manuale utente

Renesas

Renesas RH850/E1L Istruzioni per l'installazione e il funzionamento

Renesas

Renesas Synergy DK-S3A7 Manuale utente

Renesas

Renesas RAA604S00 Istruzioni per l'installazione e il funzionamento

Renesas

Renesas Synergy SK-S7G2 Manuale utente

Renesas

Renesas SKP36912G Manuale utente

Renesas

Renesas R5F56307CDFN Manuale utente

Renesas

Renesas YROTATE-IT-RX23T Manuale utente

Renesas

Renesas RL78/G1A Manuale utente

Renesas

Renesas RL78/G10 Manuale utente

Renesas

Renesas RZ/G1H Manuale utente

Renesas

Renesas RL78/G1M Manuale utente

Renesas

Renesas RSK Series Manuale utente

Renesas

Renesas UPD789327 Series Manuale utente

Renesas

Renesas EK-RA2E2 Manuale utente

Renesas

Renesas RX23W Series Istruzioni per l'installazione e il funzionamento

Renesas

Renesas RX65N Series Manuale utente

Renesas

Renesas RL78/G11 Manuale utente

Renesas

Renesas RA2E2 Group Manuale utente

Renesas

Renesas RX62T Manuale utente

Renesas

Renesas R20UT2113EJ0100 Manuale utente

Renesas

Renesas V850ES/F 3-L Series Manuale utente

Renesas

Renesas M16C/29 Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

Cypress

Cypress CY4607 HX2VL Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente