Reolink Argus 2 Guida rapida
Reolink Argus 2/Argus Pro
Operational Instruction
EN/DE/FR/IT/ES
July, 2020
QSG6_A https://reolink.com https://support.reolink.com
Technical Support
please visit our ocial support site and contact our support team before returning the
products: https://support.reolink.com.
Technische Unterstützung
Wenn Sie Hilfe brauchen, kontaktieren Sie bitte Reolink Support Team zuerst, bevor Sie Ihre
Bestellung zurücksenden. Meiste Fragen oder Probleme können von unserem Online Support
Center beantwortet und gelöst werden: https://support.reolink.com.
Support technique
Si vous avez besoin d’aide, veuillez contacter Reolink avant de retourner votre produit. La
plupart des questions peuvent être répondues via notre centre de support en ligne à l'adresse
https://support.reolink.com.
Supporto Tecnica
Se avete bisogno di aiuto, le chiediamo gentilmente di contattare Reolink prima di restituire il
prodotto. La maggior parte delle domande può essere risolta tramite il nostro centro di
assistenza online all'indirizzo https://support.reolink.com.
Soporte técnico
Si necesita ayuda, comuníquese con Reolink antes de devolver su producto. La mayoría de las
preguntas se pueden responder a través de nuestro centro de soporte en línea en
https://support.reolink.com.
REOLINK INNOVATION LIMITED
Room B, 4th Floor, Kingway Commercial Building, 171-173 Lockhart Road, Wan Chai, Hong Kong
Hoferstasse 9B, 71636 Ludwigsburg, Germany
Product Ident GmbH
REP
Contents What’s in the Box
* The camera and the rechargeable battery are packed separately in the same package.
* Please use the skin for better weatherproof performance when you install the camera outdoors.
What’s in the Box
Camera Introduction
Install Rechargeable Battery
Set up the Camera
Charge the Battery
Installation Guides
Notes on PIR Motion Sensor
Notes on Rechargeable Battery Usage
Troubleshooting
Specifications
Notification of Compliance
2
3
4
5
6
7
11
13
14
15
16
EN
NOTE: Camera and accessories vary with dierent camera models that you purchase.
2English
1 English
Outdoor Security
Mount
x1
Surveillance
Sign x1
Mounting Hole
Template x1
(x2 for Argus 2)
Screws
(in pack) x1
(x2 for Argus 2)
Quick Start Guide
x1
Skin x1
*
Camera
x1
Wall Mount
(Only for Argus 2)
x1
Rechargeable
Battery
x1
*
Power Cable
x1
Install Rechargeable Battery
To remove the battery from the camera,
please pull the button on the top of the
battery and slide it upwards.
Slide the battery downward and lock it firmly.
4English
3 English
Camera Introduction
Red Light: WiFi connection failed
Dierent states of the status LED:
Blue Light: WiFi connection succeeded
Blinking: Standby status
On: Working status
Micro SD Card Slot
Daylight Sensor
Lens
Status LED
Built-in Mic
Built-in PIR Motion Sensor
Speaker
Wall Mount
Reset Hole
* Press the reset button with a
pin to restore factory settings.
* SD card is not included.
* Only for Argus 2
Check the button status to see if
the battery is installed correctly.
• On Smartphone
Download and Launch the Reolink App or Client software, and follow the onscreen instructions to
finish initial setup.
Scan to download the Reolink App.
Set up the Camera Charge the Battery
NOTE: The solar panel is NOT included in the package, you can buy it on Reolink ocial
online stores.
Charge the battery with a power adapter
* Battery can also be charged separately.
Charge the battery with the
Reolink Solar Panel.
Charging indicator:
Orange LED: Charging Green LED: Fully charged
6English5English
For the weatherproof performance, always
cover the USB charging port with the rubber
plug after finishing charging the battery.
• On PC
Download path of the Reolink Client: go to https://reolink.com > Support > App & Client.
Available on the
• Use the camera skin for better weatherproof
performance when you install the camera
outdoors.
• Install the camera 2-3 meters (7-10 ft)
above ground. The detection range of
the motion sensor would be maximized
at such a height.
• For eective motion detection,
please install the camera angularly.
NOTE: If a moving object approaches the PIR
sensor vertically, the camera may fail to
detect motion.
Installation Guides Mount the Camera
into a Wall
8English7 English
45
12
3
θ
Mounting
Height:
2-3 Meters
PIR Detecting Distance:
2-10 Meters
AB
Press the button to release the
plate from the security mount.
Lock the security mount on its
plate. (Make sure the top edge
of the plate is inserted into the
mount.)
Press the security mount
button until its plate clicks into
the mount.
Screw the camera, adjust its
angle and tighten the knob to
lock it.
Screw the security mount
plate into the wall.
Magnet (for Argus 2 only)
Remove the Camera
Attach the Camera to a Tree
10English
9 English
12 3
Thread the provided strap to
the mounting plate.
Fasten the mounting plate
to a tree.
Press the security mount button
to remove the mount out.
Unscrew the camera from the
security mount.
follow the steps 3-5 in the wall
mounting to finish installation.
12 3
12
Put up the skin, provided in
the package, for Reolink
Argus 2 camera.
There is an anti-falling safety
rope. Please fasten the other
end of the rope to the wall
mount when mounting it into
a wall.
Stick the camera to the wall
mount and twist the camera
to adjust direction.
NOTE: The detection range would be wider with higher sensitivity but it would lead to more false
alarms. It is recommended to set up the sensitivity level to “Low” or “Mid” when you install the
camera outdoors.
Sensitivity Value Detection Distance
(For moving and living objects)
High
Mid
Low
81 - 100
51 - 80
0 - 50 Up to 5 meters (16ft)
Up to 8 meters (26ft)
Up to 10 meters (33ft)
The PIR detection range can be customized to meet your specific needs. You may refer to the
following table to set it up in Device Settings via Reolink App.
• Do not face the camera towards any objects with bright lights, including
sunshine, bright lamp lights, etc.
• Do not place the camera near any outlets, including the air conditioner
vents, humidifier outlets, the heat transfer vents of projectors, etc.
• Do not install the camera at places with strong wind.
• Do not face the camera towards a mirror.
• Keep the camera at least 1 meter away from any wireless devices,
including WiFi routers and phones in order to avoid wireless interference.
Notes on PIR Motion Sensor
PIR Sensor Detection Range
12English
11 English
!Important Notes on Reducing
False Alarms
Notes on Rechargeable Battery Usage
Reolink Argus 2 or Argus Pro is not designed for 24/7 full capacity running or around-the-clock
live streaming. It’s designed to record motion events and remotely view live streaming only when
you need it. Learn useful tips on how to extend the battery life in this post:
https://support.reolink.com/hc/en-us/articles/360006991893
1. Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or
Reolink solar panel. Do not charge the battery with solar panels from any other brands.
2. Charge the battery in temperatures between 0°C and 45°C and always use the battery in
temperatures between -20°C and 60°C.
3. Make sure the battery compartment is clean and the battery contacts are aligned.
4. Keep the USB charging port dry, clean and free of any debris, and cover the USB charging
port with the rubber plug when the battery is fully charged.
5. Never charge, use or store the battery near any ignition sources, such as fire or heaters.
6. Store the battery in a cool, dry and ventilated environment.
7. Never store the battery with any hazardous or combustible objects.
8. Do keep the battery away from children.
9. Do not short-circuit the battery by connecting wires or other metal objects to the positive (+)
and negative (-) terminals. Do not transport or store the battery with necklaces, hairpins or other
metal objects.
10. Do not disassemble, cut, puncture, short-circuit the battery, or dispose of the battery in water,
fire, microwave ovens and pressure vessels.
11. Do not use the battery if it gives o an odor, generates heat, becomes discolored or deformed,
or appears abnormal in any ways. If the battery is being used or charged, remove the battery
from the device or the charger immediately, and stop using it.
12. Always follow the local waste and recycle laws when you get rid of the used battery.
Camera is not powering on
If your camera is not powering on, please apply the following solutions:
• Make sure the battery is correctly inserted into the compartment.
• Charge the battery with a DC 5V/2A power adapter. When the green light is on,
the battery is fully charged.
• If you have another spare battery, please swap the battery to have a try.
If these won't work, please contact Reolink Support https://support.reolink.com/.
Failed to scan the QR code on the phone
If you fail to scan the QR code on your phone, please apply the following solutions:
• Remove the protective film on the lens of the camera.
• Wipe the camera lens with a dry paper/towel/tissue.
• Vary the distance between your camera and the mobile phone so that the camera can focus better.
• Try to scan the QR code under sucient lighting.
If these won't work, please contact Reolink Support https://support.reolink.com/.
Troubleshooting
14English13 English
NOTE: We hope that you enjoy the new
purchase. But if you are not satisfied with the
product and plan to return, we strongly
suggest that you reset the camera to factory
default settings and take out the inserted SD
card before returning.
Use of the product is subject to your
agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of
reach of children.
This product comes with a 2-year limited
warranty that is valid only if purchased from
Reolink Ocial Store or a Reolink authorized
reseller. Learn more:
https://reolink.com/warranty-and-return/.
harm to the environment or human health
from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse
of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environment safe recycling.
If the camera fails to connect to WiFi, please
try the following solutions:
• Make sure the WiFi frequency band meets
the network requirement of the camera.
• Ensure that you have entered the correct
WiFi password.
• Put the camera closer to your router to
ensure a strong WiFi signal.
• Change the encryption method of the WiFi
network to WPA2-PSK/WPA-PSK
(safer encryption) on your router interface.
• Change your WiFi SSID or password and
make sure that SSID is within 31 characters
and password is within 64 characters.
• Set your password using only the characters
available on the keyboard.
If these won't work, please contact Reolink
Support https://support.reolink.com/.
Failed to connect to WiFi during
initial setup
16English15 English
Specifications Notification of
Compliance
Reolink declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU.
FCC Compliance Statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation. For more information, visit:
https://reolink.com/fcc-compliance-notice/.
Simplified EU Declaration
of Conformity
This marking indicates that this product
should not be disposed with other household
wastes throughout the EU. To prevent possible
Correct Disposal of this product
Operating Frequency: 2.4GHz
Operating Temperature:
-10°C to 55°C (14°F to 131° F)
Weather Resistance:
IP65 certified weatherproof
Size: 96 x 58 x 59mm
Weight (Battery included): 260g (9.2 oz)
(Argus 2)/230g (8.1 oz) (Argus Pro)
PIR Detection Distance:
Adjustable/up to 10m (33ft)
PIR Detecting Angle: 120° horizontal
Audio Alert:
Customized voice-recordable alerts
Other Alerts:
Instant email alerts and push notifications
Video resolution: 1080p HD at 15 frames/sec
Field of View: 130° diagonal
Night Vision: Up to 10m (33 ft)
Video
PIR Detection & Alerts
General
Limited warranty
Terms and Privacy
This equipment complies with RSS-102 radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed and
operated with minimum distance 20cm between the
radiator & your body.
2412MHz—2472MHz (18dBm)
By using the Product Software that is embedded on the
Reolink product, you agree to the terms of this End User
License Agreement (“EULA”) between you and Reolink.
Learn more: https://reolink.com/eula/.
17 English
End User License Agreement
ISED Radiation Exposure Statement
OPERATING FREQUENCY
(the maximum transmitted power)
Überblick
Lieferumfang
Allgemeine EINFÜHRUNG
Den Akku installieren
Kamera-Einrichtung
Laden des Akkus
Achtung für die Installation der Kamera
Hinweise zum PIR Bewegungssensor
Wichtige Hinweise zurVerwendung von Akkus
Fehlerbehebung
Technische Daten
Konformitätserklärung
19
20
21
22
23
24
28
30
31
33
33
DE
18Deutsch
Altri manuali per Argus 2
8
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Reolink Telecamera per esterni
Reolink
Reolink Duo 2 Guida rapida
Reolink
Reolink Duo 2 PoE Guida rapida
Reolink
Reolink Argus PT Manuale utente
Reolink
Reolink Go PT Manuale utente
Reolink
Reolink Duo Manuale utente
Reolink
Reolink B5M11WA Guida rapida
Reolink
Reolink Argus Eco Guida rapida
Reolink
Reolink E1 Series Guida rapida
Reolink
Reolink Argus 3 Manuale utente
Reolink
Reolink TrackMix LTE Manuale utente
