Repotec WD-5714 H Manuale utente
Wireless 802.11 B/G/N
ADSL2/2+ Modem Router
User Manual
Contents
1. Introduction..........................................................................................................3
1.1 General Description.................................................................................3
1.2 Specifications............................................................................................3
1.2.1 ADSL Standard ............................................................................3
1.2.2 Wireless Features.........................................................................3
1.2.3 Software Features ........................................................................3
1.2.4 Management.................................................................................3
2. Hardware Installation .........................................................................................4
2.1 Packet content ..........................................................................................4
2.2 Hardware Setup Procedures...................................................................4
3. Software Configuration.......................................................................................5
3.1 Quick Start................................................................................................6
3.2 Interface Setup.......................................................................................10
3.2.1 Internet Settings.........................................................................10
3.2.2 LAN Settings...............................................................................11
3.2.3 Wireless LAN Settings...............................................................13
3.3 Advanced Setup......................................................................................15
3.3.1 Firewall .......................................................................................15
3.3.2 Routing........................................................................................15
3.3.3 NAT .............................................................................................16
3.3.4 QoS (Quality of Service).........................................................18
3.3.5 VLAN..........................................................................................20
3.3.6 ADSL...........................................................................................21
3.4 Access Management...............................................................................21
3.4.1 ACL.............................................................................................21
3.4.2 IP Filter.......................................................................................22
3.4.3 SNMP..........................................................................................23
3.4.4 UPnP............................................................................................23
3.4.5 DDNS...........................................................................................24
3.4.6 CWMP ........................................................................................24
3.5 Maintenance ...........................................................................................25
3.5.1 Administration...........................................................................25
3.5.2 Time Zone...................................................................................25
3.5.3 Firmware ....................................................................................25
3.5.4 SysRestart...................................................................................26
3.5.5 Diagnostics..................................................................................26
3.6 Status .......................................................................................................27
3.6.1 Device Info..................................................................................27
3.6.2 System Log..................................................................................28
3.6.3 Statistics ......................................................................................28
1. Introduction
1.1General Description
The ADSL2+ Wireless Router is a high-speed ADSL2+ Ethernet/Wireless router that is
specifically designed to connect to the Internet and to directly connect to your local area
network (LAN) via high-speed 10/100 Mbps Ethernet, or wireless LAN (WLAN). The
ADSL2+ modem is compatible with the latest ADSL standards, including ADSL2 and
ADSL2+, and supports up to 24 Mbps downstream and 1.5 Mbps upstream to deliver true
broadband speed and throughput. The DSL router supports wireless 802.11b/g/n and the
following security protocols: WEP, WPA, WPA2, and PSK. To ensure fully compatibility, the
DSL device was tested with all major DSLAMs, and support standard 10/100 Mbps Base-T
Ethernet interface Auto MDI/MDIX 10/100 Switch function allowing user easily to link to PC
or other Switches/Hubs. The DSL device is an idea solution for multi-users utilizing build-in
channel mode (PPPoE, PPPoA, IPoA, RFC1483), IP routing, NAT functionalities sharing the
ADSL link. The DSL device is also a perfect solution for the residential users, it supports the
users with bridge mode in host based PPPoE Client.
1.2Specifications
1.2.1 ADSL Standard
ITU-T G.992.1(G.dmt)
ANSI T1.413 Issue 2
G.992.2 (G.lite)
G.994.1 (G.hs)
Auto-negotiating rate adaptation
ADSL2 G.dmt.bis (G.992.3)
ADSL2 G.lite.bis (G.992.4)
ADSL2+ (G.992.5)
1.2.2 Wireless Features
Compliant with IEEE 802.11 B/G/N
Up to 150 Mbps wireless operation rate
64/128 bits WEP for security
WPA support
ACL (MAC address Filtering)
1.2.3 Software Features
RFC-1483/2684 LLC/VC-Mux bridged/routed mode, RFC-1577 Classical IP over ATM,
RFC-2516 PPPoE, RFC-2364 PPPoA, ITU-T 1.610 F4/F5 OAM send and receive loop-back,
802.1d Spanning-Tree Protocol, DHCP Client/Server/Relay ,NAT, RIP v1/v2, DNS Relay
Agent, DMZ support, IGMP Proxy/Snooping, Stateful Packet Inspection, IP Packet Filtering ,
QoS, Dynamic DNS, UPnP support.
1.2.4 Management
Web-based Configuration Menu-driven Command-line Interpreter Telnet Remote
Management SNMP v1/v2/Trap Firmware upgrade through FTP, TFTP and HTTP
Configuration backup/restore Diagnostic Tool
2. Hardware Installation
2.1Packet content
ADSL2+ Router * 1
Dedicated Power Adaptor *1
RJ-45 Ethernet cable*1
RJ-11 telephone cable*1
Manual CD*1
Antenna*1
2.2Hardware Setup Procedures
1. Connect RJ-11 line from ADSL2+ Wireless Router WAN port to DSLAM.
2. Connect the SMA from Antenna.
3. Connect RJ-45 line from your PC to ADSL2+ Wireless Router LAN1-4 port.
4. Connect the Power Adaptor from power jack to power outlet.
5. Push the power switch in “ON” mode.
3. Software Configuration
The DSL device is an ADSL2+ wireless router. When you power on the device, the system
will boot up and connect to ADSL automatically. The default configurations for the system
are listed below.
LAN IP address: 192.168.1.1,
NetMask:255.255.255.0
Wireless SSID: ADSL_Modem_Router
User can change settings via WEB browser. The following sections describe the set up
procedures. Please set your PC’s Ethernet port as follow:
IP address: 192.168.1.XXX
NetMask:255.255.255.0
Start your web browser. Type the Ethernet IP address of the modem/router on the address bar
of the browser. Default IP address is 192.168.1.1. The Enter Network Password dialog box
appears. Type the user name and password and then click OK.(default user name : admin;
default password : admin) Once you have connected to ADSL2+ router. You will see the
status page.
This page displays the ADSL modem/router’s current status and settings.
3.1Quick Start
The Quick Start Wizard is a useful and easy utility to help setup the device to quickly connect
to your ISP (Internet Service Provider) with only a few steps required. It will guide you step
by step to configure the password, time zone, and WAN settings of your device. The Quick
Start Wizard is a helpful guide for first time users to the device.
¾Click RUN WIZARD to move on:
¾Run Wizard
The Wizard will guide you through these four quick steps. Begin by clicking on NEXT.
Step 1. Set your new password
Step 2. Choose your time zone
Step 3. Set your Internet connection
a. Dynamic IPAddress
Choose this option to obtain an IP address automatically from your ISP.
b. Static IPAddress
Choose this option to set static IP information provided to you by your ISP.
c. PPPoE/PPPoA
Choose this option, if your ISP uses PPPoE/PPPoA. (For most DSL users)
d. Bridge Mode
Choose this option, if your ISP uses Bridge Mode.
Step 4. Save settings of thisADSL Router
Click NEXT to save the settings
3.2Interface Setup
3.2.1 Internet Settings
a. ATM VC
ATM settings are used to connect to your ISP. Your ISP provides VPI, VCI settings to you. In
this Device, you can totally setup 8 VCs on different encapsulations, if you apply 8 different
virtual circuits from your ISP. You need to activate the VC to take effect. For PVCs
management, you can use ATM QoS to setup each PVC traffic line's priority.
Item Description
Virtual Circuit Select the VC number you want to setup.
VPI Virtual Path Identifier.
VCI Virtual Channel Identifier.
ATM QoS Select the Quality of Service types for this Virtual Circuit. The ATM QoS types
include CBR (Constant Bit Rate), VBR (Variable Bit Rate) and UBR
(Unspecified Bit Rate). These QoS types are all controlled by the parameters
specified below, including PCR, SCR and MBS.
PCR Peak Cell Rate.
SCR Sustained Cell Rate.
MBS Maximum Burst Size.
Indice
Altri manuali Repotec Router di rete
Repotec
Repotec WA 2614 Manuale utente
Repotec
Repotec RP-S48G4 Manuale utente
Repotec
Repotec RP-G3224DB Manuale utente
Repotec
Repotec ADSL2+ Powerline Router Manuale utente
Repotec
Repotec RP-G3800UC Manuale utente
Repotec
Repotec RP-PE054 Manuale utente
Repotec
Repotec RP-170508K Manuale utente
Repotec
Repotec RP-PE2402I Manuale utente
Repotec
Repotec RP-1708K Manuale utente
Repotec
Repotec RP-1008W Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza