Restrain B100 Manuale utente
B100 Restrain Generator
Ripen
User Manual
V1.0
Original user manual
©Restrain 2019
It is mandatory to read this manual before you use the machine.
Copyright ©Restrain 2019
Restrain reserves the right to change specifications and/or spare parts without prior notice.
The content of this user manual may also be changed without prior notice.
For information about settings, maintenance and repairs not provided for in this user manual, please contact the technical department of your supplier.
This user manual has been compiled with all possible care. Restrain assumes no responsibility for any errors in this manual and/or the consequences of an
erroneous interpretation of the instructions.
All rights reserved. No part of this publication may be reproduced, stored in computerised databases, or made public, in any form or by any means, either
electronic, mechanical, through photocopying, recording or otherwise, without the prior written consent of Restrain. This also applies to the associated
drawings and diagrams.
Preface
This is the manual for the B100 Restrain Generator for ripening, hereafter referred to as 'the
machine'.
This manual is intended for anyone who works with the machine.
This manual contains information and instructions for installation, operation and maintenance
of the machine. We recommend that you carefully read this manual before use and follow the
procedures and instructions strictly. This will ensure that you get the best out of the machine and
prevents possible accidents and serious injury. The application and use of this product is the user’s
responsibility and should be in accordance with relevant legislation.
Storing the manual
This manual is a part of your machine. Store the manual in the immediate vicinity of the machine.
Always present a copy of the manual to anyone who works with the machine.
List of the symbols used in this manual
For all operations in which the safety of the operator and/or technician is at stake and where
caution should be exercised, the following symbols are used.
Indicates a hazardous situation that, if not avoided, could result in serious injury or death
and/or material damage if one does not obey the safety instructions.
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury
and/or material damage if one does not follow the safety instructions.
Provides additional information that is helpful to do a task or to avoid problems.
Version history
During the lifetime of the machine, engineering improvements may result in the need to revise
this manual. It is then at the discretion of Restrain, if a revision or new version of this manual
is required. The following table describes the main changes for each document version of this
manual.
Version Date Changes
V1.0 August 2019 Original
Regulatory information
The B100 Restrain Generator is designed to comply with the following directives:
• 2014/30/EU: EMC Directive
The CE Declaration is available upon request. Please contact the manufacturer.
Contents
Preface..............................................................................................................................................3
Storing the manual....................................................................................................................... 3
List of the symbols used in this manual...................................................................................... 3
Version history.............................................................................................................................. 3
Regulatory information..................................................................................................................4
1 Introduction...................................................................................................................................7
1.1 Intended use...........................................................................................................................8
1.2 Technical specifications..........................................................................................................8
2 Description....................................................................................................................................9
2.1 Workings of the machine..................................................................................................... 10
2.2 Programmes......................................................................................................................... 10
3 Safety...........................................................................................................................................11
3.1 Safety signs on the machine............................................................................................... 11
3.2 Safety measures.................................................................................................................. 12
3.3 General safety warnings...................................................................................................... 12
4 Transport.....................................................................................................................................13
5 Installation...................................................................................................................................14
5.1 Unpacking.............................................................................................................................14
5.2 Place the machine............................................................................................................... 14
5.3 Prepare the Restrain ethanol jerrycan.................................................................................15
6 Operation.....................................................................................................................................16
6.1 Start the machine.................................................................................................................16
6.2 Turn off the machine............................................................................................................ 16
6.3 Emergency situations........................................................................................................... 17
7 Maintenance and cleaning........................................................................................................ 18
7.1 Daily checks......................................................................................................................... 18
7.2 Monthly check...................................................................................................................... 18
7.3 Cleaning................................................................................................................................18
8 Storage........................................................................................................................................ 19
8.1 Prepare for storage.............................................................................................................. 19
9 Troubleshooting......................................................................................................................... 20
9.1 Problems with the machine..................................................................................................20
10 End of the lease contract........................................................................................................21
11 Disposal.....................................................................................................................................22
Restrain
Contents 5
12 Appendices............................................................................................................................... 23
12.1 Material Safety Data Sheets.............................................................................................. 23
12.1.1 Identification of the substance................................................................................... 23
12.1.2 Composition................................................................................................................23
12.1.3 Hazards identification................................................................................................. 23
12.1.4 First aid measures......................................................................................................23
12.1.5 Fire-fighting measures................................................................................................24
12.1.6 Accidental release measures..................................................................................... 24
12.1.7 Handling and storage................................................................................................. 24
12.1.8 Exposure control and personal protection..................................................................24
12.1.9 Physical and chemical properties...............................................................................24
12.1.10 Stability and reactivity.............................................................................................. 25
12.1.11 Toxicological information...........................................................................................25
12.1.12 Ecological information.............................................................................................. 25
12.1.13 Disposal considerations............................................................................................25
12.1.14 Transport information................................................................................................25
12.1.15 Regulatory information............................................................................................. 25
12.1.16 Other information......................................................................................................26
12.2 Fuel COSHH assessment..................................................................................................27
Restrain
Contents 6
1 Introduction
The machine is a leased product.
• It is not allowed to make any changes to or replace any parts of the machine. Any
modification may result in hazardous situations that can cause personal injury and
damage the machine. Furthermore, this will void the warranty and lease contract.
Contact the manufacturer if anything needs replacement.
• Always use Restrain ethanol supplied by the manufacturer. The machine has been
thoroughly tested with this specific ethanol. If you use any other type of ethanol, this
may negatively affect the operation and life expectancy of the machine. Furthermore, it
will damage the crops, may damage the machine and cause personal injury.
Restrain
Introduction 7
1.1 Intended use
The machine is intended for indoor use only. Make sure that:
• the minimum empty room volume is 200 m3for normal cold stores;
• the minimum empty room volume is 500 m3for rooms that have been completely sealed to
controlled atmosphere standards.
The machine is intended for indoor use only. The maximum store size depends on the standard of
construction, room air leakage, and the target level of ethylene concentration.
When the room is too small, too much ethylene will remain inside. This will damage the
crops.
1.2 Technical specifications
The following specifications apply to the machine:
Description Value
Length 50 cm
Width 32 cm
Height 40 cm
Weight 21 kg
Sound emission Max. 40 dB(A)
Minimum ambient temperature when in use -1 °C
Maximum ambient temperature when in use 30 °C
Maximum relative humidity when in use 70 %
Restrain
Introduction 8
2 Description
This chapter describes the B100 Restrain Generator and its functions.
1
2
3
6
7
8
9
10
11
4
5
No. Item Function
1. Handles Use the handles to carry the
machine.
2. Programme selection knob Use the programme selection
knob to select the required
pump speed.
3. Reset button Use the reset button to restart
the machine after a thermal er-
ror. Refer to Troubleshooting
on page 20 for more inform-
ation.
Restrain
Description 9
No. Item Function
4. Ethanol pump The ethanol pump pumps the
ethanol from the jerrycan to the
machine.
5. Ethanol tube The ethanol tube transports the
ethanol from the jerrycan to the
machine.
6. Power converter The power converter converts
the voltage from the mains
power supply.
7. Mains power supply cord Use the mains power supply
cord to turn the machine on or
off.
8. Exhaust The exhaust expels hot air from
the heater.
9. Thermal error light The Thermal error light blinks
red when the catalyst has
reached its upper limit.
10. Pump light The Pump light tuns yellow
when the pump is on.
11. Power light The Power light tuns green
when the machine is powered.
2.1 Workings of the machine
The machine has an internal catalyst. The temperature of the catalyst reaches a high temperature.
The ethanol is pumped into the machine, the heat of the catalyst will vaporise the ethanol, which
then turns into ethylene.
2.2 Programmes
There are three programmes you can choose for the product you want to ripen:
• A pump speed of 1.44 litres per 24 hours
• A pump speed of 2.88 litres per 24 hours
• A pump speed of 4.32 litres per 24 hours
Restrain
Description 10
Altri manuali per B100
1
Indice
Altri manuali Restrain Generatore portatile
