Reverse Tap RD B1 Manuale utente

Operation Manual

Ver 1.1

ReverseTap

WWW.REVERSETAP.COM

What is ReverseTap?

ReverseTap is an innovative beer dispensing system. It is an upward dispensing system,

different from the conventional downward dispensing system. ReverseTap dispenser

dispenses beer upward through the bottom of the cup. ReverseTap cup is uniquely

designed for this system with its patented plastic tension and sealing technology.

There are several benefits of ReverseTap compared to the conventional dispensing

system. 1) It maximizes the keg yield rate by preventing the loss of beer with its foam

amount control feature. 2) Its automatic amount control feature enhances the operator’s

productivity. 3) Its fast dispensing time enables the operator to sell more beer to more

people. It is extremely effective in a time-limited venues such as stadiums or concerts.

4) The novelty of upward dispensing concept itself is a powerful marketing tool to attract

more customers.

In conclusion, ReverseTap provides huge financial benefit to the users.

About this manual

This manual is specially designed to detail how to operate ReverseTap dispenser’s

functions and features only. Installation of the ReverseTap dispenser must be done

through the authorized service provider. Without its proper installation, the device might

not perform properly or be damaged. NPC Co., Ltd. is not liable for any damages or

injuries that may occur due to improper installation.

•Please read this manual carefully before use to ensure safe and proper usage.

• Descriptions are based on the device’s default settings.

•Images and screenshots may differ in appearance from the actual product.

•Contents of this manual may vary from actual product according to software version

and specifications of model.

•Randomly changing product software provided by ReverseTap or downloading

software obtained through unofficial paths to its product may cause failure or error of

the product.

•Software, images, and other media provided with this device are licensed for limited

use. Extracting and using these materials for commercial or other purpose is an

infringement of copyright laws.

•You can download the manual from the ReverseTap website, www.reversetap.com.

This guide is protected under international copyright laws. No part of this guide may be

reproduced, distributed, translated, or transmitted in any form or by any means, electronic

or mechanical, including photocopying, recording, or storing in any information storage

and retrieval system, without the prior written permission of NPC Co., Ltd.

Trademark

ReverseTap and ReverseTap logo are registered trademarks of NPC Co., Ltd.

Important safety precaution

Please read this manual carefully before using the device to ensure safe and proper use.

•This device is not intended for use by people (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the device by a person

responsible for their safety.

•Do not disassemble the device. Repair should be made by authorized service provider.

•If there is smoke or burning smell from the device, unplug the power cord immediately

and contact service provider.

•Do not use damaged power plugs and cords.

•Do not touch the power plug with wet hands. This may cause electric shock or fire.

•Unplug the power cord from the wall outlet when the device is not in use.

•Do not place the device or power cord near heat sources such as flammable spray.

•Turn off the power if there is a risk of lightning when used outdoor.

•Keep vinyl packaging wrap of the device and other small parts out of reach of children.

•Do not put any parts into the dishwasher or use scouring powder, benzene thinner, and

chlorine bleach for cleaning. This may cause damage to the parts.

Additional usage instruction

•Recommended operating temperature: room temperature (20 ±5 ℃// 68 ±9 °F)

•Recommended humidity: 40 - 70%

•Do not dispense hot beverage. (higher than 40°C //104°F). It can cause burn injuries

and malfunctioning of the device.

•Do not dispense any liquids other than drinkable beverage.

•Do not dispense any liquids containing solid ingredients such as fruit pulp. This can

cause the blockage of the hose and lead to the malfunctioning of the device.

•Always move the device with both hands. (maximum weight of the device is 17lbs)

Contents

Getting started

5 ReverseTap dispenser type / Package contents

6 Device layout

Basic Functions

7 Control panel configuration / Basic functions with button control

8 Indicator icons & text on OLED display

9 How to set the value of each mode

10 SETUP Mode / Size setting Mode

11 FOB Mode

12 Foam Mode / Cleaning Mode

13 Shortcuts to frequently used functions

Advanced Functions

14 Advanced Mode / Unit Mode

15 Security Mode

17 TIME • VOLUME Mode

18 Tracking Mode / LED Mode

19 AUTO • MANUAL mode / FLOW SENSOR Mode

20 Maintenance

21 Troubleshooting

23 Product Specification

24 Warning on use of ReverseTap Cup

Getting started

ReverseTap dispenser type

The difference between Twin and Single type is the number of dispensing nozzle and

LCD screen availability. The difference between Single Tall and Single Flat is height. All

other features are exactly same.

Package contents

Check inside of the packaging box for the list of components in a separate print

•Cover, gripper, nozzle are already assembled into the dispenser when shipped in the

packaging box.

•USB memory for LCD monitor is not included.

•Unauthorized accessories might cause damage to the device.

•Appearances and specifications are subject to change without prior notice.

•If accessory is lost or damaged, you can purchase it from the official distributor.

Twin Premium Single Tall Single Flat

Device Layout

Front view

Back view (Control panel view)

Top view

Cup sensor

Gripper

Nozzle

LED

Single Tall Single Flat Twin Premium

There is no power switch on Single type dispenser

Adapter USB

Flow sensor

Power Switch

Audio

Basic Functions

Control panel configuration

General view

Operation button

OLED display

A screen displaying the current operation status, mode selection, and various settings.

Basic functions with button control

Power off

Press and hold the Stop button at Standby status for 2 seconds, then the device will

turn off with a long beep sound.

※For Twin Premium dispenser, we recommend using the power switch ( ) to turn off.

Stop button cannot turn off the LCD display of Twin Premium model.

Power on

Press and hold the Start button at the power off status for 2 seconds, then the device

will turn on with a long beep sound. (Only for Single model)

※For Twin Premium dispenser, use the power switch ( ) to turn on. Start button

cannot turn on the Twin Premium model.

Reset

Press and hold both the Right and Left button at the Standby status for two seconds.

Then, if you enter correct password and press and hold set button for two seconds, all

the settings will be restored to the initial factory setting values with a long beep sound.

Reset amount tracking

Press and hold the Down button at the Standby status for 2 seconds, then the

dispensed amount number will be reset to zero.

FOB on

FOAM on

2733 oz

READY

16 oz

◎

Up button

Down button

Left button Right buttonStart button

Stop button

Set button

Start button Stop button Set button Up button Down button Left button Right button

Indicator icons & text on OLED display

①Dispensed amount

This number shows how much beer has been dispensed.

②Default size

You can preset the default size as one of three different sizes, which is Small, Medium,

and Large. The circle signal (◎) indicates current default size. You can shift among

three sizes with Up and Down button at the Standby status. You can also change the

amount of each default size.

③Ready

This text indicates the Standby status.At this status, you can insert the cup and

dispense beer.

④Preset amount

This number shows the fixed amount of each preset default size

⑤FOB, Foam mode

If the FOB or Foam mode is set, it is displayed as On. If deactivated, it is displayed as

Off

⑥Dispensing status ( )

This signal indicates the amount of dispensed beer and the status that beer is being

dispensed

⑦Percentage and time

While dispensing, the percentage and elapsed time of each beer cup is displayed

⑧Dispensing

This text indicates the Dispensing status. It notifies that beer is being dispensed

⑨Finished

This indicates the Finished status

⑩FOB Mode

This text indicates the FOB status. If the sensor of the dispenser detects too much foam

in the keg, it will automatically stop dispensing beer to prevent foam explosion. Normally

this mode is activated when the KEG is almost empty

Standby status Dispensing status

FOB On

Foam On

2733 OZ

Ready

16 oz

◎2733 oz

Dispensing

50% 3.3 s

KEG Alarm

Warning !

FOB

Warning !

2745 oz

Finished

100% 6.3 s

Finished status

On : Push Start

Off : Push Stop

FOB status FOB status Keg Alarm status

Screenshot of each Basic Mode

1. Setup Mode

2. Size-setting Mode

3. FOB Mode

4. Foam Mode

5. Cleaning Mode

How to change the Mode Setting

•At the Stand-by status, long press the Set button enter the Mode Setting status.

•Press the Set button in each mode to shift through changeable values as they blink.

Once you shift through all sections, the blinking will stop.

•You may change values for each blinking section by pressing Up and Down button.

•Press Left and Right button to shift to the next mode.

•Once all changes are complete, long press the Set button to save the changes and

return to the Standby status

⑪FOB status

Once FOB mode is activated, after the warning signal, the display will show options

between Start and Stop.

⑫KEG Alarm Mode

This text notifies that KEG Alarm mode is activated. Users can set the Alarm mode to

check how much beer is left in the keg.

Foam

Number of foam

making : 3

FOB

Detector : On

Flow Rate x 1.30

Cleaning

Stop

SETUP

Push Start Small

362.5 mL

1. Setup Mode 2. Size-setting Mode 4. Foam Mode 5. Cleaning Mode

3. FOB Mode

SETUP Mode

When users install ReverseTap dispenser for the first time, this mode must be executed.

By executing this mode, the dispenser can measure and memorize the flow rate of the

beer during dispensing. Memorizing the flow rate is important because it will enable FOB

mode to work properly. This mode should be executed every time when there is a change

of system environment such as change of cooling machine, change of CO2 pressure rate,

and change of beer brand.

•Once entered into this mode, plug the cup into the dispenser

•Double press the Start button to start dispensing the beer

•Press Stop button to finish the discharge of beer when it reaches any desired amount.

•Long press the Set button, and then the discharged amount will be automatically set as

the preset size of Medium.

•If you want to change the amount of each preset size, you can change it in Size-setting

Mode

•Pressing any other button will take you back to the initial screen of Sync Mode without

saving.

SETUP

Push Start

Size-setting Mode

In this mode, users can change and set the discharge amount of each preset size

(Small/Medium/Large)

•Once entered into this mode, you can press Up and Down button to select any of the

three preset sizes (Small/Medium/Large)

•Once you chose any preset size, you can press Set button. Then the numbers below

will start blinking. Now you can change the numbers to set the discharge amount of

preset size using Up and Down button.

Small

12.2 oz

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Reverse Tap Distributore

Reverse Tap

Reverse Tap V20 Manuale utente

Manuali Distributore popolari di altre marche

Silver King

Silver King Majestic SK12MAJ Guida rapida

Franke

Franke F3Dn Twin Manuale utente

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Manuale utente

DAN DRYER

DAN DRYER 282 Manuale utente

Essity

Essity Tork 473208 Manuale utente

CBS

CBS SD300BU-88 Guida all'installazione

Sealey

Sealey MK77 Manuale utente

Fluid Management

Fluid Management Accutinter 1600 Manuale utente

Franke

Franke DVS SD99-010 Manuale utente

Graco

Graco Dispensit 1053-10C Guida alla risoluzione dei problemi

ITALTINTO

ITALTINTO i50 Manuale utente

Coca-Cola

Coca-Cola FREESTYLE 9000 Manuale utente

Graco

Graco ProMix 2KE Manuale di istruzioni

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 Manuale utente

Wayne

Wayne GLOBAL VISTA CNG Manuale utente

clarsen

clarsen H133 Manuale utente

PicoBrew

PicoBrew Zymatic Manuale utente

BOWMAN

BOWMAN BP-007 Manuale utente