RIDGID Micro DM-100 Manuale utente

p. 1

p. 21

p. 41

p. 61

p. 83

p. 105

p. 125

p. 145

p. 165

p. 185

p. 205

p. 225

p. 247

p. 267

p. 287

p. 307

p. 327

p. 349

p. 369

p. 389

p. 409

p. 433

RIDGE TOOL COMPANY

micro

DM-100

micro DM-100 Digital Multimeter

Record Serial Number below and retain product serial number which is located on nameplate.

Serial

No.

micro DM-100

Digital Multimeter

WARNING!

ReadthisOperator’sManual

carefully before using this

tool. Failure to understand

and follow the contents of

this manual may result in

electrical shock, re and/or

serious personal injury.

micro DM-100

micro DM-100 Digital Multimeter

Lifetime Warranty...................................................................................................... Back Cover

*Original instructions

Table of Contents

Table of Contents........................................................................................................................... 2

Safety Symbols................................................................................................................................ 3

General Safety Rules.................................................................................................................... 3

Work Area Safety.......................................................................................................................... 3

Electrical Safety............................................................................................................................. 3

Personal Safety.............................................................................................................................. 3

Equipment Use and Care.......................................................................................................... 4

Service.............................................................................................................................................. 4

Specic Safety Information...................................................................................................... 4

Multimeter Safety ........................................................................................................................ 4

Description, Specications And Standard Equipment.............................................. 5

Description ..................................................................................................................................... 5

Specications................................................................................................................................. 5

Standard Equipment .................................................................................................................. 8

Controls............................................................................................................................................ 8

Icons .................................................................................................................................................. 9

FCC Statement...............................................................................................................................10

Electromagnetic Compatibility (EMC)..............................................................................10

Changing/Installing Batteries...............................................................................................10

Pre-Operation Inspection .......................................................................................................11

Set-Up and Operation ...............................................................................................................12

Rotary Function Switch................................................................................................................13

Input Terminals ...........................................................................................................................13

Pushbuttons.................................................................................................................................14

DC/AC Voltage Measurement...............................................................................................14

DC/AC Current Measurement...............................................................................................15

Resistance Measurement........................................................................................................15

Diode Test......................................................................................................................................16

Continuity Check........................................................................................................................16

Capacitance Measurement....................................................................................................16

Frequency Measurement........................................................................................................17

Temperature Measurement...................................................................................................17

Maintenance Instructions .......................................................................................................18

Cleaning.........................................................................................................................................18

Calibration.....................................................................................................................................18

Fuse Replacement .....................................................................................................................18

Accessories......................................................................................................................................18

Storage ..............................................................................................................................................19

Service and Repair.......................................................................................................................19

Disposal.............................................................................................................................................19

Battery Disposal...........................................................................................................................19

Troubleshooting...........................................................................................................................20

micro DM-100 Digital Multimeter

Safety Symbols

In this operator’s manual and on the product, safety symbols and signal words are used

to communicate important safety information. This section is provided to improve under-

standing of these signal words and symbols.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that follow this symbol to avoid possible injury

or death.

DANGER

WARNING

CAUTION

NOTICE

DANGER indicates a hazardous situation which, if not avoided, will result

in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could re-

sult in death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could result

in minor or moderate injury.

NOTICE indicates information that relates to the protection of property.

This symbol means read the operator’s manual carefully before using the equip-

ment. The operator’s manual contains important information on the safe and prop-

er operation of the equipment.

This symbol indicates the presence of a high voltage hazard.

This symbol indicates the risk of electrical shock.

General Safety Rules

WARNING

Read all safety warnings and instructions. Failure to follow the warnings and in-

structions may result in electric shock, re and/or serious injury.

SAVE THESE INSTRUCTIONS!

Work Area Safety

• Keep your work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate equipment in explosive atmospheres, such as in the presence of

ammable liquids, gases or dust. Equipment can create sparks which may ignite the dust

or fumes.

• Keep children and by-standers away while operating equipment. Distractions can

cause you to lose control.

Electrical Safety

• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electrical shock if your body is earthed or

grounded.

• Do not expose equipment to rain or wet conditions. Water entering equipment will

increase the risk of electrical shock.

Personal Safety

• Stay alert, watch what you are doing and use common sense when operating

equipment. Do not use equipment while you are tired or under the inuence of

drugs, alcohol or medication. A moment of inattention while operating equipment

may result in serious personal injury.

micro DM-100 Digital Multimeter

• Use personal protective equipment. Always wear eye protection. Protective equip-

ment such as as protective gloves and clothing, dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will reduce personal injuries.

• Do not overreach. Keep proper footing and balance at all times. This enables better

control of the equipment in unexpected situations.

Equipment Use and Care

• Do not force equipment. Use the correct equipment for your application. The cor-

rect equipment will do the job better and safer at the rate for which it is designed.

• Do not use equipment if the switch does not turn it ON and OFF. Any tool that can-

not be controlled with the switch is dangerous and must be repaired.

• Store idle equipment out of the reach of children and do not allow persons unfa-

miliar with the equipment or these instructions to operate the equipment. Equip-

ment can be dangerous in the hands of untrained users.

• Maintain equipment. Check for missing parts, breakage of parts and any other condi-

tion that may aect the equipment’s operation. If damaged, have the equipment re-

paired before use. Many accidents are caused by poorly maintained equipment.

• Use the equipment and accessories in accordance with these instructions, tak-

ing into account the working conditions and the work to be performed. Use of the

equipment for operations dierent from those intended could result in a hazardous situ-

ation.

• Use only accessories that are recommended by the manufacturer for your equip-

ment. Accessories that may be suitable for one piece of equipment may become haz-

ardous when used with other equipment.

• Keep handles dry and clean; free from oil and grease. Allows for better control of the

equipment.

Service

• Have your equipment serviced by a qualied repair person using only identical

replacement parts. This will ensure that the safety of the tool is maintained.

Specific Safety Information

WARNING

This section contains important safety information that is specic to this tool.

Read these precautions carefully before using the RIDGID® micro DM-100 Digital

Multimeter to reduce the risk of electrical shock or other serious injury.

SAVE THESE INSTRUCTIONS!

Keep this manual with the tool for use by the operator.

Multimeter Safety

• Use caution when working with voltages above 30 V AC RMS, 42 V AC peak or 60

V DC. These voltages pose serious shock hazard. High-voltage circuits, both DC and AC,

are very dangerous and should be measured with great care. Avoid working alone.

• Do not connect to voltages that exceed 600 VAC or VDC relative to earth ground.

This may damage the meter and expose the operator to a shock hazard.

• When using the probes, keep your ngers behind the nger guards on the probes.

This reduces the risk of electric shock.

• Never ground yourself when taking electrical measurements. Do not touch exposed

metal pipes, outlets, xtures, etc., which might be at ground potential. Keep your body

isolated from ground using appropriate methods.

micro DM-100 Digital Multimeter

• When measuring current, turn o the circuit power before connecting the meter in

series with the circuit. Improper set up could result in electrical shock.

• When measuring resistance, disconnect all power (remove batteries, unplug cord,

discharge all capacitors, etc.) to the circuit being measured. This reduces the risk of

electric shock.

• After resistance test, the capacitive circuits must be discharged. This will help pro-

tect against electric shock.

• Use extreme caution when working near bare conductors and bus bars. Accidental

contact with conductors could result in electrical shock.

• Turn o power to the circuit under test before cutting, unsoldering, or breaking the

circuit. Small amount of current can expose the operator to a shock hazard.

The EC Declaration of Conformity (890-011-320.10) will accompany this manual as a sepa-

rate booklet when required.

If you have any question concerning this RIDGID® product:

• Contact your local RIDGID distributor.

• Visit www.RIDGID.com or www.RIDGID.eu to nd your local RIDGID contact point.

• Contact RIDGID Technical Services Department at rtc[email protected], or in

the U.S. and Canada call (800) 519-3456.

Description, Specifications And Standard Equipment

Description

The RIDGID® DM-100 Digital Multimeter is a handheld instrument. The unit can measure DC

and AC Voltage and Current, Resistance, Capacitance, Frequency, Temperature, Continuity

(audible signal) and Test Diodes. The multimeter can automatically select the best range

for measurement.

The unit has data hold and relative measurement functions. Overload protection and low

battery indication are provided. The unit has a 4000-count backlight LCD.

The multimeter is powered by a 9V battery and has auto power-o function after 15 min-

utes of inactivity.

Specifications

Display ................................................................4000 Count backlight LCD

Overvoltage Category..................................CAT III 1000V, CAT IV 600V

Fuse Rating........................................................0.5A/1000V Fast Blow for the 400mA Range,

10A/1000V Fast Blow for the 10A Range

Insulation...........................................................Class 2, Double Insulation

Protection Rating............................................IP 67

Polarity................................................................Auto Polarity Indication

Operating Temperature...............................0°C to 50°C (32°F to 122°F)

Power Supply ...................................................9V Battery, NEDA 1604, IEC 6F22 or 6LR61

Weight.................................................................0.82 lbs (375 g)

Dimension.........................................................7.2" x 3.2" x 2.2" (182 x 82 x 55 mm)

micro DM-100 Digital Multimeter

Input Limits

Function Maximum Input

Voltage V DC/AC 1000 V DC/AC

Current mA DC/AC 400 mA DC/AC

Current A DC/AC 10 A DC/AC

Frequency, Duty Cycle 600 V DC/AC

Accuracy is given at 18°C to 28°C (65°F to 83°F), less than 70% RH

DC Voltage (Autoranging)

Range Resolution Accuracy

400.0 mV 0.1 mV ±0.5% of Reading ± 2 Digits

4.000 V 1 mV

±1.2% of Reading ± 2 Digits40.00 V 10 mV

400.0 V 100 mV

1000 V 1 V ±1.5% of Reading ± 2 Digits

Input Impedance............................................7.8 MΩ

Maximum Input ..............................................1000V DC or 1000V AC RMS

AC Voltage (Autoranging)

Range Resolution Accuracy

400.0 mV 0.1 mV ±1.5% of Reading ± 70 Digits

4.000 V 1 mV ±1.2% of Reading ± 3 Digits

40.00 V 10 mV ±1.5% of Reading ± 3 Digits

400.0 V 100 mV

1000 V 1 V ±2.0% of Reading ± 4 Digits

Input Impedance............................................7.8 MΩ

AC Response.....................................................True RMS 50 Hz to 400 Hz

Maximum Input ..............................................1000V DC or 1000V AC RMS

DC Current (Autoranging for µA and mA)

Range Resolution Accuracy

400.0 µA 0.1 µA ±1.0% of Reading ± 3 Digits

4000 µA 1 µA

±1.5% of Reading ± 3 Digits40.00 mA 10 µA

400.0 mA 100 µA

10 A 10 mA ±2.5% of Reading ± 5 Digits

Overload protection......................................0.5A/1000V and 10A/1000V Fuse

Maximum Input ..............................................400 mA DC or 400mA AC RMS on µA/mA Ranges,

10A DC or AC RMS on 10A Range

AC Current (Autoranging for µA and mA)

Range Resolution Accuracy

400.0 µA 0.1 µA ±1.5% of Reading ± 5 Digits

4000 µA 1 µA

±1.8% of Reading ± 5 Digits40.00 mA 10 µA

400.0 mA 100 µA

10 A 10 mA ±3.0% of Reading ± 7 Digits

Overload protection......................................0.5A/1000V and 10A/1000V Fuse

AC Response.....................................................True RMS 50 Hz to 400 Hz

Maximum Input ..............................................400 mA DC or 400mA AC RMS on µA/mA Ranges,

10A DC or AC RMS on 10A Range

micro DM-100 Digital Multimeter

Resistance (Autoranging)

Range Resolution Accuracy

400.0 Ω 0.1 Ω ±1.2% of Reading ± 4 Digits

4.000 kΩ 1 Ω ±1.0% of Reading ± 2 Digits

40.00 kΩ 10 Ω

±1.2% of Reading ± 2 Digits400.0 kΩ 100 Ω

4.000 MΩ 1 kΩ

40.00 MΩ 10 kΩ ±2.0% of Reading ± 3 Digits

Input Protection..............................................600V DC or 600V AC RMS

Capacitance (Autoranging)

Range Resolution Accuracy

4.000 nF 1 pF ±5.0% of Reading ± 0.5 nF

40.00 nF 10 pF ±5.0% of Reading ± 7 Digits

400.0 nF 0.1 nF

±3.0% of Reading ± 5 Digits4.000 uF 1 nF

40.00 uF 10 nF

200.0 uF 0.1 uF ±5.0% of Reading ± 5 Digits

Input Protection..............................................600V DC or 600V AC RMS

Frequency (Autoranging)

Range Resolution Accuracy

9.999 Hz 0.001 Hz ±1.5% of Reading ± 5 Digits

99.99 Hz 0.01 Hz

999.9 Hz 0.1 Hz

±1.2% of Reading ± 3 Digits

9.999 kHz 1 Hz

99.99 kHz 10 Hz

999.9 kHz 100 Hz

9.999 MHz 1 kHz ±1.5% of Reading ± 4 Digits

Sensitivity ..........................................................> 0.5 V RMS while ≤ 100kHz

Sensitivity ..........................................................> 8 V RMS while > 100kHz

Overload protection......................................600V DC or AC RMS

Duty Cycle

Range Resolution Accuracy

0.1% to 99.9% 0.1% ±1.2% of Reading ± 2 Digits

Pulse Width .......................................................> 100 µs, < 100 MS

Frequency Width ............................................5 Hz to 150 kHz

Sensitivity ..........................................................>0.5 V RMS

Overload protection......................................600V DC or AC RMS

Temperature

Range Resolution Accuracy

-20°C to +760°C 1°C ±3% of Reading ± 5°C / 9°F

-4 °F to +1400 °F 1°F

Sensor..................................................................Type K Thermocouple

Overload protection......................................600V DC or AC RMS

Diode Test

Range Resolution Accuracy

0.3 mA Typical 1 mV ±10% of Reading ± 5 Digits

Open Circuit Voltage.....................................1.5 V DC Typical

Overload protection......................................600V DC or AC RMS

micro DM-100 Digital Multimeter

Audible Continuity

Audible Threshold..........................................< 150 Ω

Test Current.......................................................< 0.3 mA

Overload protection......................................600V DC or AC RMS

Standard Equipment

The RIDGID® micro DM-100 Digital Multimeter comes with the following items:

• micro DM-100 Digital Multimeter • Terminal Plugs

• Test Leads with Covers, Black and Red • User Manual and Instruction CD

• K Type Adapter and Temperature Probe • Carrying Case

Figure 1 – micro DM-100 Digital Multimeter

Test Leads

Temperature Probe

and Adapter

Terminal Plugs

Stand

Figure 2 – Back of micro DM-100 Digital Multimeter

Test Lead Holders

Warning Label

Controls

Figure 3 – DM-100 Digital Multimeter Controls

1. Large 4000 Count Liquid Crystal Display

2. Range Pushbutton (RANGE)

3. Frequency/%Duty Pushbutton (Hz%)

4. Mode Pushbutton (MODE)

5. Data Hold Pushbutton (HOLD)

6. Relative Pushbutton (REL)

7. Backlight pushbutton ( )

8. Rotary Function Switch

9. Positive Input Terminal for 0 to 10 A ( )

10. Positive Input Terminal for 0 to 400 mA ( )

11. Positive Input Terminal for DC/AC Voltage Measurement,

Resistance Measurement, Continuity Check, Diode Test,

Frequency Measurement, Capacitance Measurement

and Temperature Measurement ( )

12. COM (Negative) Terminal for all measurements ( )

(Not Shown – Backside of unit) Battery Door, Fuse Compart-

ment, fold out stand, Probe holder

Altri manuali per micro DM-100

Indice

Altri manuali RIDGID Multimetro

RIDGID

RIDGID micro DM-100 Manuale utente

Manuali Multimetro popolari di altre marche

Agilent Technologies

Agilent Technologies 34420A Manuale utente

Fluke

Fluke 83 Manuale utente

Hameg

Hameg HM 8012 Manuale utente

Mastech

Mastech MY70 Manuale utente

Steren

Steren MUL-300 Manuale utente

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuale utente

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuale utente

PeakTech

PeakTech 4000 Manuale per l'uso e la cura

YOKOGAWA

YOKOGAWA 90050B Manuale utente

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuale utente

Fluke

Fluke 8846A Manuale operativo e di manutenzione

Tempo Communications

Tempo Communications MM200 Manuale utente

Elenco Electronics

Elenco Electronics CM-1555 Manuale utente

Mastech

Mastech MS8238C Manuale utente

SDAR

SDAR 830A, 830B, 830D, 830C Manuale utente

RS PRO

RS PRO RS-9519BT Manuale utente

BGS technic

BGS technic 8890 Manuale utente

Amprobe

Amprobe Hexagon 60 Manuale utente