RIGHT ANGLE R-STYLE PLAN 1 WORKSTATION Manuale utente

PAGE 1 OF 2

VERSION DATED: 2/1/12

TOOLS REQUIRED FOR ASSEMBLY:

CORDLESS DRILL

#2 PHILLIPS HEAD DRIVER BIT

TAPE MEASURE

LEVEL

R-STYLE PLAN 1 WORKSTATION ASSEMBLY INSTRUCTIONS:

STEP 1: LAY THE WORKSURFACE 1 ON A PROTECTED SURFACE WITH THE

INSERTS AND PILOT HOLES FACING UP. ASSEMBLE THE RIGHT LEG ASSEMBLY

4 , THE MODESTY PANEL 5 , AND THE LEFT LEG ASSEMBLY 3 USING (3)

MACHINE SCREWS 9 INTO EACH LEG ASSEMBLY. DO NOT FULLY TIGHTEN THE

SCREWS. IF YOUR WORKSTATION HAS THE OPTIONAL WIRE MANAGEMENT

CHANNEL, INSTALL IT ACCORDING TO THE INSTRUCTIONS THAT CAME WITH

THE CHANNEL.

STEP 2: PLACE THE LEG AND MODESTY PANEL ASSEMBLY ON THE WORKSUR

FACE 1 ALIGNING THE HOLES IN THE WORKSURFACE SUPPORTS WITH THE

INSERTS IN THE WORKSURFACE. ATTACH IT USING (3) MACHINE SCREWS

ON THE LONG LEG AND (2) MACHINE SCREWS ON THE SHORT LEG. FULLY

TIGHTEN ALL THE FASTENERS INCLUDING THE SCREWS HOLDING THE MODESTY

PANEL 5 TO THE LEFT LEG ASSEMBLY 3 AND THE RIGHT LEG ASSEMBLY 4 .

ATTACH THE TOP EDGE OF THE MODESTY PANEL TO THE WORKSURFACE

USING (3) OR (4) WOOD SCREWS 8 INTO THE PILOT HOLES ON THE WORK

SURFACE. DO NOT OVER TIGHTEN THE SCREWS. USE A LOW TORQUE SETTING

ON THE DRILL.

STEP 3: CENTER (2) JOINER PLATES 7 ON THE EDGE OF THE WORKSURFACE

THAT WILL BUTT THE CENTER SECTION. PLACE THEM 1" FROM THE FRONT AND

BACK EDGES OF THE WORKSURFACE 1 . FASTEN WITH (2) WOOD SCREWS 8

IN EACH JOINER PLATE.

STEP 4: LAY THE WORKSURFACE 1 ON A PROTECTED SURFACE WITH THE

PILOT HOLES FACING UP. ALIGN THE HOLES IN THE PLATE AT THE TOP OF THE

POST LEG 2 WITH THE PILOT HOLES AT THE BACK EDGE OF THE WORK

SURFACE. ATTACH THE POST LEG WITH (4) WOOD SCREWS 8 .

INSTRUCTION # 51268 HARDWARE PACK # 51267

READ ALL THE

INSTRUCTIONS

BEFORE BEGINNING

ITEM # PART # DESCRIPTION QTY.

1 VARIES WORKSURFACES 3

2 29sl 29SL POST LEG 2

3 VARIES R STYLE LEFT LEG ASSY 1

4 VARIES R STYLE RIGHT LEG ASSY 1

5 VARIES R STYLE MODESTY PANEL 1

6 50824 R STYLE 420mm RIGHT 1

7 800512 2 X 2 WORKSURFACE JOINER PLATE 4

8 51708 M5 x 18mm SQ/PH/WSHR HEAD WOOD SCREW 27

9 50133 10 32 x 1/2 PHILLIPS TRUSS HEAD MACHINE SCREW 6

10 R STYLE A 6 x 15mm MACHINE SCREW 5

STEP 4

CENTER SECTION

STEPS 1-3

LEFT SECTION

6703 ZINSER ST., SCHOFIELD, WI 54476

PHONE: 800.298.4351 FAX: 866.882.9475

.raproducts.com

K&A MANUFACTURING

PAGE 2 OF 2

STEP 5: LAY THE WORKSURFACE 1 ON A PROTECTED SURFACE WITH THE PILOT HOLES FACING UP. ALIGN

THE HOLES IN THE PLATE AT THE TOP OF THE POST LEG 2 WITH THE PILOT HOLES IN THE WORKSURFACE.

ATTACH THE POST LEG USING (4) WOOD SCREWS 8 . ATTACH (2) JOINER PLATES 7 AS YOU DID ON THE

LEFT SECTION.

STEP 6: WITH THE ASSISTANCE OF A HELPER SET THE LEFT AND RIGHT SECTIONS UPRIGHT IN THEIR FINAL

LOCATION. SET THE EDGES OF THE CENTER SECTION ON THE JOINER PLATES ON THE LEFT AND RIGHT

SECTIONS OF THE WORKSTATION. ATTACH THE LEFT AND RIGHT SECTIONS TO THE CENTER SECTION WITH

(2) WOOD SCREWS 8 IN EACH JOINER PLATE.

STEP 7: LEVEL THE WORKSTATION BY TURNING THE LEVELING GLIDES CLOCKWISE (FROM THE TOP) ON THE

LOW CORNERS OF THE UNIT.

STEP 6

STEP 5

RIGHT SECTION

6703 ZINSER ST., SCHOFIELD, WI 54476

PHONE: 800.298.4351 FAX: 866.882.9475

.raproducts.com

VERSION DATED: 2/1/12

K&A MANUFACTURING

Altri manuali RIGHT ANGLE Scrivania

RIGHT ANGLE

RIGHT ANGLE NewHeights 4 Series Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewCrank SPLIT WORKSURFACE CRANK HEIGHT ADJUSTABLE... Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights 4 Bonita ET Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewFixed 3-LEG WORKSTATION Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewFixed HEIGHT WORKSTATION Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights Series Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights Series Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights ELECTRIC HEIGHT ADJUSTABLE... Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewCrank 3.5 Series Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights RECTANGULAR 3-LEG WORKSTATION Manuale utente

RIGHT ANGLE

RIGHT ANGLE R-STYLE PLAN 110 Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights 4 NZP Series Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights Elegante XT Series Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights 4 NFD Series Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewCrank 3-LEG CRANK HEIGHT ADJUSTABLE... Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights SPLIT WORKSURFACE ELECTRIC HEIGHT ADJUSTABLE... Manuale utente

RIGHT ANGLE

RIGHT ANGLE NewHeights 4 FD Series Manuale utente

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente