Rimage AutoPrinter Manuale utente
Rimage AutoPrinter™
User Guide
For more information visit rimage.com/support
110656_N
Rimage Corporaon reserves the right to make improvements to the equipment and soware described in this document at any me without any
prior noce. Rimage Corporaon reserves the right to revise this publicaon and to make changes from me to me in the content hereof without
obligaon of Rimage Corporaon to nofy any person or organizaon of such revisions or changes.
This document may contain links to web sites that were current at the me of publicaon, but may have moved or become inacve since. This
document may contain links to sites on the Internet that are owned and operated by third pares. Rimage Corporaon is not responsible for the
content of any such third-party site.
© 2012, Rimage Corporaon
Rimage®is a registered trademark of the Rimage Corporaon. Professional™ and Everest™ are trademarks of the Rimage Corporaon. Dell™ is
trademark of Dell Computer Corporaon. FireWire™ is a trademark of Apple Computer, Inc. Windows® is a registered trademark of Microso
Corporaon.
All other trademarks and registered trademarks are the property of their respecve owners.
The most recent version of this document can be found at www.rimage.com/support.
Corporate Headquarters:
Rimage Corporaon
7725 Washington Avenue South
Minneapolis, MN 55439
USA
800-553-8312 (toll free US)
Service: +1 952-946-0004 (Asia/Pacic,
Mexico/Lan America)
Fax: +1 952-944-6956
European Headquarters:
Rimage Europe GmbH
Albert-Einstein-Str. 26
63128 Dietzenbach
Germany
Tel: +49 6074-8521-14
Fax: +49 6074-8521-100
Asia/Pacic Headquarters:
Rimage Japan Co., Ltd.
2F., WIND Bldg.
7-4-8 Roppongi Minato-ku,
Tokyo 106-0032 JAPAN
Tel: +81-3-5771-7181
Fax: +81-3-5771-7185
Contents
110656_N For more information visit rimage.com/support
Introducon .................................................................................... 1
About this User Guide .............................................................................................. 1
About your Product ................................................................................................. 1
Unpacking and Setup Instrucons ........................................................................... 1
Important Informaon .................................................................... 2
Support Informaon ................................................................................................ 2
Learn More Online ................................................................................................... 2
Technical Support and Product Updates .................................................................. 2
Opcal Disc Recording Soware Disclaimer ............................................................ 2
Safety and Compliance Informaon ........................................................................ 3
Safety Precauons .............................................................................................................. 3
Compliance Informaon ..................................................................................................... 4
Idenfy the Parts of the AutoPrinter................................................ 5
Front View ................................................................................................................ 5
Back View ................................................................................................................. 6
Operator Panel ......................................................................................................... 7
Operate the AutoPrinter.................................................................. 8
Install the Carousel .................................................................................................. 8
Power On and O the AutoPrinter .......................................................................... 8
Load and Unload Discs ............................................................................................. 9
Load the Discs ..................................................................................................................... 9
Unload the Discs ................................................................................................................. 9
Reset the AutoPrinter ......................................................................................................... 9
Set Prinng Preferences ........................................................................................... 9
Maintain the AutoPrinter .............................................................. 10
Install the Ribbons ................................................................................................. 10
Cleaning Method and Schedule ............................................................................. 10
1
For more information visit rimage.com/support
110656_N
Introduction
This manual provides the informaon needed to operate and idenfy the
parts of the AutoEverest and AutoPrism III AutoPrinter. To set up your
AutoPrinter and install the CD Designer™ Soware Suite, refer to the set up
and installaon guide included with your product.
For technical informaon, refer to the Rimage AutoPrism IIITM
and AutoEverestTM AutoPrinter Specicaons document found at
www.rimage.com/support. From the Support page select Printers > Product
Name > User Manuals tab.
Important! Your Rimage AutoPrinter™ system may not look exactly like the
model featured in this user guide.
About this User Guide
• While we try to maintain all versions of our manuals and
documentaons, please note that the English version found on our web
site always contains the most up-to-date informaon.
• Unless otherwise indicated, all Windows navigaon statements are
Windows 7 paths. Other Windows operang system navigaon may
dier slightly.
• These notes and symbols are used throughout the manual to help clarify
informaon:
Tip: A Tip suggests alternave methods that may not be obvious and helps
you understand the benets and capabilies of the product.
Important!
• An Important note provides informaon essenal to the compleon of a
task.
• Important supplemental informaon.
• You can disregard informaon in a Tip and sll complete a task, but do
not disregard an Important note.
nCauon: A Cauon indicates that failure to observe this guideline could
result in loss or damage to the equipment, product, soware, or data.
nWarning! A Warning indicates that failure to follow this guideline
could result in bodily injury to personnel operang or maintaining the
equipment.
About your Product
The Rimage AutoPrinter is available with either the Everest printer or the
Prism III printer. For specic informaon about your printer, refer to the
Everest or Prism printer user guide that shipped with your product.
Tip: The term ‘AutoPrinter’ is used throughout this user guide to refer to
both the AutoEverest and the AutoPrism. The terms ‘AutoEverest’ and
‘AutoPrism’ are used only to refer to either product specically.
Unpacking and Setup Instrucons
Unpacking and installaon instrucons are included with the Rimage
AutoPrinter. Refer to the setup and installaon guide included with your
Rimage AutoPrinter.
2
For more information visit rimage.com/support
110656_N
Important Information
This secon provides support contact informaon, and cauons and
warnings, for the Rimage AutoPrinter.
Technical Specicaons for this product can be found at
www.rimage.com/support. From the Support page select Printers > Product
Name > User Manuals tab.
Support Contact Informaon
US, Canada, Lan America
Rimage Corporaon
7725 Washington Avenue South
Minneapolis, MN 55439
USA
An: Rimage Services
Email: [email protected]
Telephone:
North America: 800-553-8312
Mexico/Lan America: 952-944-8144
Fax: 952-944-7808
Europe
Rimage Europe GmbH
Albert-Einstein-Str. 26
63128 Dietzenbach
Germany
Email: [email protected]
Telephone: +49 6074-8521-14
Fax: +49 6074-8521-100
Asia/Pacic
Rimage Japan Co., Ltd.
2F., WIND Bldg.
7-4-8 Roppongi Minato-ku,
Tokyo 106-0032 JAPAN
Email: [email protected]
Telephone: +81-3-5771-7181
Fax: +81-3-5771-7185
Contact Rimage Services
Website: www.rimage.com/support
Knowledge Base: hp://rimage.custhelp.com
Log in and select the Ask a Queson tab
When you contact Rimage
Services, please provide:
• System serial number and soware
version
• Funconal and technical
descripon of the problem
• Exact error message received
Copy this informaon from your Rimage product
for future reference.
Note: Make sure you update the Serial Number
here anyme you receive a replacement system.
Serial Number:
Product Name:
Date of Purchase:
Learn More Online
At www.rimage.com/support, you can experience Rimage’s world-class
Support and Services.
From the Support home page:
1. Select your product series.
2. Select your product.
3. Learn more on the product page.
From your product page you can access:
• Informaon about the latest soware
and rmware updates
• Product specicaons
• The latest documents
• Current rmware and driver downloads
Technical Support and Product Updates
Rimage oers a variety of service and support opons for the Prism III
printer including Exchange Services. Please contact your Rimage Value
Added Reseller or Rimage for addional informaon and pricing.
Important! Make sure you register your autoloader so you are eligible for
parts and labor covered for 1 year and priority phone support. Registraon
is available at hp://www.rimage.com/support/warranty-registraon.
Opcal Disc Recording Soware Disclaimer
This Product, Soware, or Documentaon may be designed to assist you
in reproducing material in which you own the copyright or have obtained
permission to copy from the copyright owner. Unless you own the copyright
or have permission to copy from the copyright owner, you may be violang
copyright law and be subject to payment of damages and other remedies. If
you are uncertain about your rights, you should contact your legal advisor. If
you are neither in possession of the copyright nor have authorizaon from
the owner of the copyright, unauthorized copying of copyrighted material
on an opcal disc or any other media violates naonal and internaonal
legislaon and can result in severe penales.
3
Important Information
For more information visit rimage.com/support
110656_N
Safety and Compliance Informaon
This manual and the indicaons on the product allow proper and safe
operaon. The indicaon marks below help protect you and other persons
from injury, and equipment from damage.
Safety Precauons
This manual and the indicaons on the product allow proper and safe
operaon. The indicaon marks below help protect you and other persons
from injury, and equipment from damage.
nWarnings!
• Use of controls or adjustments or performance of procedures other than
those specied herein may result in hazardous radiant exposure.
• Do not disassemble or use tools on a Rimage printer. All service procedures
should be performed by a Rimage-authorized technician, or sent in for
Rimage-authorized repair.
• Do not service a Rimage printer with the power cord plugged in the AC
outlet.
• The interior of a Rimage printer contains sharp edges.
• Do not use a Rimage printer if it is overheang or an abnormal smell is
detected. This may result in a re and an electric shock. In case of heang
or abnormal smell, immediately disconnect the cable from the outlet.
Contact your Rimage-authorized dealer for repairs.
• The front bezel of the Rimage Everest™ printer can be opened by hand. Do
not insert your ngers.
• Do not touch the heat roller in a Rimage Everest printer.
nCauons:
• All equipment with AC line voltage, or low DC voltages, such as switches,
power supplies, fuses, fans, non-stepper motors, must be replaced with
Rimage-approved components to maintain the safety approval issued by
UL.
• Use only the supplied AC power cord. For more informaon or to order a
new power cord, contact Rimage Customer Service.
• This product is designed for an oce environment.
• Allow sucient free space for opening the printer tray. Do not touch the
printer tray while it is moving.
• If the side cover on the Rimage Everest printer is opened while power
is supplied, the printer will stop. Do not reach into the printer while it is
operang. Do not aempt to bypass the door interlock.
• The Rimage Everest printer has no power switch. Power is disconnected
completely by unplugging the cable. Rimage recommends installing the
printer in a posion that allows immediate disconnecon of the power
cable. Always hold the plug when disconnecng the cable from the outlet.
• The Rimage Everest printer has a voltage slide switch on the back of the
unit. Before use, make sure that it is set to the correct voltage. Please do
not use any voltage other than 110VAC or 220VAC. This could result in a re
and an electric shock.
4
Important Information
For more information visit rimage.com/support
110656_N
Compliance Informaon
Product AutoPrinter
Model RAS25
Noce for USA NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference when this equipment
is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instrucon manual, may cause harmful interference to radio communicaons.
Operaon of this equipment in a residenal area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.
This product complies with UL 60950-1, 2nd edion.
Noce for Canada This Class A digital apparatus complies with Canadian ICES-003 Issue 4:2004. Cet appareil numerigue de la classe A est
conforme a la norme NMB-003 du Canade.
This product complies with CAN/CSA-C22.2 No. 60950-1-07, 2nd edion.
Noce for Europe This product is in conformity with the EMC Direcve (89/336/EEC) and the Low-Voltage Direcve (73/23/EEC) through
compliance with the following European standards:
IEC 60950:1999, 3rd edion, EN 55022:1998 + A1:2000 + A2:2003, EN 55024:1998 + A1:2001 + A2:2003, EN 61000-3-2:2000
+ A2:2005, EN 61000-3-3:1995 + A1:2001.
The CE mark has been axed in accordance with the CE Marking Direcve 93/68/EEC.
Noce for Japan This is a Class A product based on the standard of the Voluntary Control Council for Interference by Informaon Technology
Equipment (VCCI). If this equipment is used in a domesc environment, radio interference may occur, in which case, the user
may be required to take correcve acon.
Translaon:
この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラス
A 情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがありま
す。この場合には使用者が適切な対策を講ずるよう要求されることがあります。
Noce for Australia This product complies with AS/NZS CISPR 22: 2006.
5
For more information visit rimage.com/support
110656_N
Identify the Parts of the AutoPrinter
This secon idenes the dierent parts of the AutoPrinter. For detailed informaon about the parts of the Everest or Prism printer, refer the printer user guide
that shipped with your product.
Carousel
Li Arm
Everest
Printer
Prism
Printer
Printer
Operator
Buon
Control
Panel
Operator
Panel
Front View
AutoEverest AutoPrism
Operator
Panel
Printer
Operator
Buon
Control
Panel
Carousel
Acve
Li Arm
6
For more information visit rimage.com/support
110656_N
Important! The serial cable is used only for updang the rmware. Do not connect the serial cable to the AutoPrinter during normal operaon.
Identify the Parts of the AutoPrinter
Back View
AutoEverest AutoPrism
USB
Cable
Control
Cable
Power
Cord
Power
Cord
AutoPrinter
Power
Switch
AutoPrinter
Power
Switch
Serial
Cable
Port
Serial
Cable
Port
USB
Cable
Control
Cable
7
Identify the Parts of the AutoPrinter
For more information visit rimage.com/support
2001809_A
Operator Panel
The operator panel is located on the front of the
AutoPrinter. It includes an operator buon and four
indicator lights. (One light is on the operator buon.)
The control panel allows you to monitor and control the
printer.
The table below idenes the name and funcon of all
parts of the control panel.
Operator Panel Indicators
Image Name Funconality
Carousel
indicator
light
The Carousel indicator light blinks when the AutoPrinter
resumes operaon aer being paused.
Acve
indicator
light
The Acve indicator light illuminates when the control
center (PC) is communicang with the AutoPrinter. The
light blinks one me per second when the system is paused
and four mes per second when the system is waing for
you to reset the bins. Refer to the Reset the AutoPrinter
secon for more informaon.
Power
indicator
light
The Power indicator light illuminates when the AutoPrinter
is powered on.
Operator
Buon
Each me you press the operator buon, the carousel
rotates to the next bin.
Fault
indicator
light
The Fault indicator light is located on the operator buon
and illuminates if an error is detected.
Altri manuali per AutoPrinter
1
Indice
Lingue:
Altri manuali Rimage Hardware per computer
Rimage
Rimage Producer III series Manuale utente
Rimage
Rimage Professional 5100N Manuale utente
Rimage
Rimage 2000i 6.5-7.1 Service Pack 1 Manuale utente
Rimage
Rimage CDPR3 Manuale utente
Rimage
Rimage Producer III 6100N Manuale utente
Rimage
Rimage Producer III Manuale utente
Rimage
Rimage Producer III 6100 Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
