Rimage Professional 5100N Manuale utente
1 2000447_E
Rimage Professional 5100N and 5300N
Maintain the Professional
Use the information in this section to keep your Professional in optimal operating
condition.
,Warning! Always power off the autoloader and unplug the power cord before
you access the embedded PC.
Overview
Regular preventative maintenance of your Professional can help to ensure
error-free recordings and clean printed labels. Maintenance involves cleaning the
system and aligning the Everest printer on top of the autoloader.
Note: The Everest printer has its own maintenance requirements. Refer to
your Rimage Everest User Guide for information.
Cautionary Information
nCaution: To avoid damaging the Professional during maintenance:
• Never use oils, silicone, or other lubricants on any part of the
Professional.
• Use only non-abrasive cleaners to wipe down the surfaces of your
Professional.
• Never use cleaners to clean the embedded PC.
• Avoid pouring cleaners directly onto the Professional. Instead, apply the
cleaner to the cloth rst.
• Observe precautions for electrostatic-sensitive devices whenever you
access the embedded PC.
English
2000447_E 2
Maintain the Professional
Preventative Maintenance Schedule
Use the following table as a guideline for how often to perform preventative
maintenance tasks.
Note: Your system may require more frequent maintenance if used in a
dusty area, such as a store or warehouse.
Before you begin:
1. Power off the Professional.
2. Disconnect the power cord.
-Important! Failure to follow the maintenance schedule outlined below may
void your warranty.
Tool Task Frequency
Lint-free cloth
Non-abrasive, all-
purpose cleaner
Wipe down all surfaces of the
autoloader, including:
• Sides and top
• Input bins
• Output trays
• Output bin
• Base (remove the input bin rst)
• Top surface on the lift arm
Weekly
Can of
compressed air
Remove dust and debris from the
fans at the back of the autoloader.
Monthly
Vacuum Remove dust and debris from
the openings at the back of the
autoloader.
Monthly
Can of
compressed air
Remove the side panels and remove
all dust from the embedded PC.
Monthly
Torx T25 driver Align the Everest printer. Refer to
the Align the Printer section in
the Rimage Professional User Guide.
On installation
and as needed
English
Altri manuali per Professional 5100N
7
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Rimage Hardware per computer
Rimage
Rimage 2000i 6.5-7.1 Service Pack 1 Manuale utente
Rimage
Rimage Producer III 6100N Manuale utente
Rimage
Rimage CDPR3 Manuale utente
Rimage
Rimage AutoPrinter Manuale utente
Rimage
Rimage Producer III Manuale utente
Rimage
Rimage Producer III series Manuale utente
Rimage
Rimage Producer III 6100 Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
