Thank you for choosing a Robert Smart product!
USER MANUAL
DESCRIPTION
Navigator 4 is a cutting edge universal remote control. It is compatible
with more than 500 dierent electrical appliance brands which means
that the remote is compatible with all the most popular devices. It is a
perfect substitute for lost or damaged original remote control devices and
ensures control of all the main operating functions. With the Navigator 4
remote you can easily control several devices from one remote which is
particularly convenient for demanding, technology-loving users.
Navigator 4 can be used to control several devices (TV, SAT, DVD and TV
decoder (DVB-T)) from one remote. The expanded database ensures that
setup of the Robert Smart remote is fast and easy.
To start using the remote it must be programmed to control the devices
you require. To perform programming quickly and simply, please read this
manual carefully. PREPARATION
Remove the battery case cover and insert two R03 (AAA size) 1.5V batteries
(not included) matching the +/- marks to the marks in the battery case. We
do not recommend to mix simultaneously new and used batteries, use
both new batteries.
PROGRAMMING TO CONTROL PARTICULAR DEVICES
Navigator 4 guarantees a 100% result in programming of any model
device. It is ensured by 3 integrated programming methods:
a) Manual method. The best results in programming the remote to
control models of popular manufacturers by entering code from the
code table.
b) Automatic code search. Code search in automatic mode from
the integrated data base is suitable for rare models.
c) Learning function. If you have the original remote in working
order, Navigator 4 can read any signal of the original remote and
store it in the memory.
Start with code setup from the code table (Manual method), because this
method provides the fastest result*. Use ‘Automatic code search’ only if
remote control programming with code setup fails. The‘Learning function’
can be used optimally to add remote control commands that do not work
after entering the code. Of course, with the ’Learning function’ you can
copy all remote control commands, but it is recommended only if using
‘Code setup’or ‘Automatic code search’method is unsuccessful.
The ‘Learning function’ copies signals of the original remote into the
Navigator 4. To use this method, the original remote in working order
is required. The ‘Learning function’ is ideal if you want to unite several
remotes in one and some device cannot be programmed using the code
method. Or some commands of the remote do not work even after code
search or manual entry. The necessary commands can be easily ‘learnt’
from the original remote.
UNIVERSAL REMOTE CONTROL 4 in1
Navigator 4
For programming the most popular model devices, one of the mentioned
methods could be enough; in some cases an excellent result would be possible
by combining 2 or all 3 of the methods. Please, be patient, this instruction will
helpyoutondandapply the most suitable method (or combination thereof).
*The code table of most popular brands is at the end of the instruction;
in the code table below it, you can enter the codes for devices you have
found in order to nd them easily in case of necessity.
IMPORTANT: correct code setup ensures the operation of the main functions;
however, in some cases some specic functions may not function. If so, in
order to ensure operation of all remote control commands, use the “Learning
function’ additionally.
- 3 - 34-138
